Please choose your bike
Anti-Vibrations-Modul SP Conncet
CB12000M
/ RS0
€29.95*
Use the SP Connect ANTI VIBRATION MODULE to further reduce vibrations in different frequency ranges. The development of the new product is a reaction to the complexity of newer smartphone models, whose camera systems consist of increasingly sensitive components. The specially developed elastomer inlay dampens in all directions and thus causes up to 60% less vibrations (e.g.: from the motorcycle engine) to reach your smartphone, which could affect the mechanical image stabilizer of the camera. Your smartphone is protected, but still remains stable and quietly mounted so that you can navigate while driving without any problems.
CNC-machined from aircraft aluminum
3D vibration damping through specially developed elastomer inlay
Landscape or portrait mounting
Super stable 360° adjustment in 6° steps
Suitable for all SP Connect mounts with the standard damping head
Easy DIY assembly
Anti-Vibrations-Modul SP Conncet
CB12001
/ RS0
€24.95*
Attach the adhesive foil of the SP ConnectT Universal Interface directly to your smartphone or cell phone cover.
This way you can attach your cell phone to all SP Connect mounts from our range. Simply hold it on, turn the patented twist lock and you're done.
It's quicker and easier than ever to get a navigation system on your motorcycle.
3M™ adhesive foil
Secure and flat interface
Size: 66 x 55mm (2.6 x 2.17 inch)
LSL Egonia Footrests
CB11953.1M
/ RS0
€59.95*
The LSL Ergonia footrest is made of forged aluminium, finely bead blasted and finely milled on the upper side, resulting in a very noble surface finish.
Optically, the footrests are an absolute eye-catcher, the fine but not too pointed teeth provide a light cross ratchet look.
With a length of 80mm, the rests offer the perfect compromise between comfort (wide support) and sportiness (not too fast to put on). The rubber insert of the footrests can be easily removed (see photo of the green footrest). Visually, the footrest looks even more radical without the rubber. With rubber perfect for comfort and touring, without rubber for the sporty ride and aggressive look.
For mounting on the motorcycle, additional, model-specific adapters are required. Suitable adapters for the different motorcycles can be found in the accessories of this description.
Detents and adapters are equipped with ABE!
Rizoma Drag Bar Handelbar
CB11903M
/ RS0
€125.00*
The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The handlebars are really nice flat and straight handlebars, which primarily provides a very sporty and front wheel oriented seating position. Especially the hardly existing crank makes sure that you sit relatively far forward leaned.
In addition, the very straight handlebars give every bike a really nice flat line.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
Rizoma Taperet Handelbar
CB11905M
/ RS0
€123.00*
The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3 different versions (different dimensions and offset). See the technical drawings in the fots.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The Taperet handlebars are just the right handlebars for everyone who is looking for a really good everyday handlebar for sporty riding, long tours and cruising.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
ATTENTION with the MA011 handlebar: This handlebar has a rather narrow clamping area and does not fit all motorcycles (such as on a Speed Twin). Please measure the required area beforehand and compare with the dimensions on the drawing.
BMW R12 nineT:The MA006 and MA011 Plug & Play versions are suitable for this model.
Sprocket Locking plate
CB11886
/ RS0
€12.50*
Original Triumph locking plate for the chain pinion.
The plate should be replaced when replacing the sprocket for safety reasons.
Steering Stem Boss
CB11841
/ RS0
€44.95*
Brass steering head nut suitable for all air cooled 2 cylinders.
Can easily be exchanged for the original nut. Sets a nice color accent on the Yoke.
Petrol canister side case 20 l.
CB11798M
/ RS0
€329.00*
Genuine 20 liter steel petrol cans that have been painstakingly converted by hand into motorcycle side bags. There is no more stylish solution for attaching a luggage case to your motorcycle!
An absolute eye-catcher on any bike and practical too! The basis for these cases is a genuine 0.9 mm thick steel petrol can (weight approx. 4.3 kg, i.e. really high quality). The canisters are painted glossy black, cut open, fitted with high-quality aluminum hinges, leather applications, edge band and tension fasteners (all done by hand). Optionally, the cases can also be lined on the inside with hard-wearing fabric (feels like suede) (our absolute recommendation - it simply looks really high-quality when you open the case and nothing scratches the inside).
The 20 liter canister measures: 467 x 166 x 346 mm (HxWxD)
The canisters are also available in 5 & 10 liter versions (see similar articles in this description).
We recommend mounting the cases together with the SW-Motech Legend Gear luggage holders from our range (these must be ordered specifically for each model. See accessories in this description).The canisters are supplied without suitable holes for the holders. If the SW-Motech holders are ordered in addition, we also supply suitable screws for mounting on the holder.To get the same hole pattern in the canisters as the Legend Gear luggage holders have, we recommend ordering our template (see accessory article in this description).
Heavy Duty Alu Flyscreen short
CB11790M
/ RS0
€199.95*
Aluminum windshield made of nice solid 3mm aluminum sheet (which makes the windshield look very high quality). Short version (also available in long, see similar articles in this description).
Brings visually a beautiful classic line in the front part of your Triumph. The assembly is very simple and done in a few minutes.
To the optical aspect is also added that the windshield takes a noticeable air resistance relief from the chest when you go faster.
Heavy Duty Alu Flyscreen long
CB11937M
/ RS0
€234.95*
Aluminium windshield made of nice and solid 3mm aluminium sheet (which makes the windshield look very high quality). Long version (also available in short, see similar articles in this description).Brings optically a beautiful classical line into the front part of your Triumph. The assembly is very easy and done in a few minutes.In addition to the optical aspect, the windscreen takes a noticeable air resistance relief from the chest when you drive faster.
Oldschool Leather Luggage Suitcase
CB11701M
/ RS0
€289.95*
Classic, handmade real leather luggage bags in Old School briefcase design.Optional quick-release mounting system (must be ordered separately).The perfect companion for everyday use as well as for any longer tour. The size of the bags is the perfect compromise between beautiful appearance and usefulness. A motorcycle bag must not only be practical, it must also look good. The handbag for your motorcycle!
Dimensions: 38 x 30 x 13cm
The bags are made of genuine and very high-quality suede, which is water and dust repellent. Keeps tight in the rain for about 45 minutes. On longer motorcycle tours we recommend to put the clothes in a waterproof bag or a bag. The bags are stiff by their high material quality beautifully and retain so their angular suitcase form.
Inside the bag is the large main compartment, a laptop compartment and 3 other small pockets.Included in delivery is a shoulder strap (which is attached to the outside of the bag with 2 snap hooks).
Mounting/Fastening Recommendation: We recommend the bags using the Legend Gear SLC bag holders (see accessories in this description). These are to be ordered motorcycle model specifically) and the universal pocket adapter for the SLC holders (see accessories in this description).This gives you a modern bag system with an oldschool look that can be attached to and removed from the motorcycle with just one movement.
Alternatively, loops are also supplied with the tache. These can be placed around the rear frame of the motorcycle. At the loops are carabiners to which you can attach the bags very easily and quickly.For this, however, we recommend then additionally luggage bags to mount spacers to ensure that the bags can not get contact with the rear wheel (see accessory article in this description.
Classicbike-Raisch Badge
CB11686
/ RS0
€2.95*
Classicbike-Raisch Badge to sew on the leather jacket, the jeans on a bag or similar.The patches are sold separately.
%
T-Shirt Burnout
CB11660.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality T-shirt in classic, casual cut / Style: Burnout.The t-shirt has a small burnout logo on the chest and a big picture on the back with the slogan: It´s better to burn out then to fade away.See photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Peace Love Motorcycles
CB11661.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality, grey T-shirt in classic, casual cut / Style: Peace Love MotorcyclesSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
T-Shirt Two Wheels Move The Soul
CB11662.4M
/ RS0
€19.95*
High quality, navy blue T-shirt in classic, casual cut / Style: Two Wheels Move The SoulSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Too Fast
CB11663.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High quality black t-shirt in classic, casual cut / Style: Burnout.The t-shirt has a small motorcycle / cafe racer logo on the chest and a big picture on the back with the slogan: TOO FAST TO LIVE / TOO SLOW TO DIE.See photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
%
T-Shirt Two Wheels Moto
CB11664.4M
/ RS0
€34.95*
€35.85*
(2.51% saved)
High-quality, black T-shirt in classic, casual cut / Style: MotoSee photo for sizes.The t-shirt is a bit smaller than the big one. Say if you always sway between 2 sizes, then take the bigger one.
Helmet Hanger
CB11665
/ RS0
€114.95*
Wall holder made of Hold, with leather holder for your helmet!You simply plug this holder to the wall (mounting material is included) to hang your stylish helmet on the helmet holder and hang your jacket as well as your bike key on the tool keys.Finally, beautiful bike clothing gets a worthy place and is no longer simply hung in a closed cupboard or shelf where no one can see it anymore.With this holder you can hang up your motorcycle clothes, best directly on your motorcycle in your men's world, the garage. I would say that this is the most stylish way to hang your clothes neatly away!
Motogadget Mo.Club 60
CB11623
/ RS0
€99.00*
Motogadget mo.view Club 60 handlebar end mirrors in a sporty classic oval design (road legal) for 22 mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame, and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike!
The mirror can be mounted both upwards and downwards on the handlebars (fits left & right).
Mounting:
You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted).
There is also an adapter that allows both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description)
The mirror arms are manufactured to the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you mount everything
Dimensions:Width of the mirror body: 114 mm Height of the mirror body: 80 mm Thickness of the mirror body without ball head: 4.5 mm Length of the mirror arm: 110 mm Diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 12 mm
The size of the mirror surface of the m.view flight complies with the StVZO and it has ECE labelling. This makes it suitable for any motorbike without registration. Price per piece.
Motogadget M.View Sport 130 Mirror
CB11624
/ RS0
€129.00*
Motogadget M.View Sport 130 handlebar ends mirror in a sporty angular design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Width of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view flight corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View - Classic 130 Mirror
CB11625
/ RS0
€99.00*
Motogadget M.View Classic 130 handlebar ends mirror in classic round design (road legal) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmLength of mirror arm: 110 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 12 mmThe size of the mirror surface of the m.view Classic 130 corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for every motorcycle without registration.Price per piece.
Motogadget M.View Spy Mirror
CB11626
/ RS0
€99.00*
Motogadget M.View Spy handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Motogadget M.Grip Metal Handles
CB11628
/ RS0
€139.00*
Colour:
Polished
The M.Grip is a universal aluminium handlebar for all common handlebar diameters with 1 inch or 22 mm (7/8 inch) tube diameter.These grips are perfect in conjunction with the Motogadget handlebar ends mirrors & turn signals, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & turn signals can be found in the accessories of this description).Aluminium CNC milled.The clamping of the grip sleeve is concealed from the outside by a screwed inner ring. This clamping on handlebars or throttle grip is done precisely by 6 set screws made of stainless steel.The block profiling in the hand area creates a very good grip feeling.Always 2 grip sleeves are delivered as a pair.If replacement is required, individual grip sleeves can also be supplied on request. If you prefer rubber grips, you will find the same design in the m.grip soft.Important: If in doubt, please measure the inner part of the throttle grip. This should be less than 29 mm.Please always order the end caps m.grip cap separately if you want to use the handles without m.blaze disc or cone.
Motogadget M.Grip Soft Handles
CB11629M
/ RS0
€39.00*
The m.grip soft is a universal rubber grip for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in an attractive look.These grips are perfect in combination with the Motogadget handlebar ends mirrors & indicators, as these have exactly the same outer diameter and then form a perfect line without transitions (Matching mirrors & indicators can be found in the accessories of this description).
Motogadget M.View Sport Mirror
CB11630M
/ RS0
€129.00*
Motogadget M.View Sport Mirror
Are you looking for a road-legal mirror that is not only functional but also a real eye-catcher? Then the Motogadget M.View Sport Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view behind you? Then grab the XL version! You can find the exact dimensions in the details below and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View doesn't need any mirror glass at all. The mirror surface is integrated directly into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to mount the mirror without any problems. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of the handlebars.
Installation tips for Triumph models with 1-inch handlebars:
Particularly for Triumph models with 1-inch handlebars, such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a single hole in the handlebar clamp instead of a thread. No problem – with our screw kit (see accessories in this description), you can still mount the M.View mirrors. And for these models, the XL version really makes sense, as the mirror mount is often located far to the inside.
Tip for BMW R12 models:
If you value a very good rear view more than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: standard 150 mm / XL 180 mm
StVZO-compliant: meets the legal requirements and has an ECE marking – you don't need to register it!
Price is per unit.
Motogadget M.View Club Mirror
CB11631M
/ RS0
€99.00*
Motogadget M.View Club Mirror
Are you looking for a road-legal mirror that is not only functional but also visually appealing? Then the Motogadget M.View Club Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view behind you? Then grab the XL version! You can find the exact dimensions in the details below and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View Club doesn't need any mirror glass at all. The mirror surface is integrated directly into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to mount the mirror without any problems. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of your handlebars.
Installation tips for Triumph models with 1-inch handlebars
Particularly with Triumph models such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a hole in the fitting instead of a thread. No problem – with our screw kit (see accessories), you can still mount the M.View Club mirrors. And for these models, the XL version really makes sense, because the mirror mount is often located far to the inside.
Tip for BMW R12 models:
For those for whom a very good rear view is more important than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: Width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: Standard 150 mm / XL 180 mm
StVZO-compliant: Meets the legal requirements and has an ECE marking – you do not need to register!
Price is per unit.
Motogadget M.View Classic Mirror
CB11632M
/ RS0
€99.00*
Motogadget M.View Classic Mirror
Are you looking for a road-legal mirror that is not only functional but also a real eye-catcher? Then the Motogadget M.View Classic Mirror is perfect for you! With its sporty, angular design, it fits any standard mirror mount with a thread. And don't worry – the appropriate mounting material (M10x1.5, M10x1.25 right- and left-hand thread) is included so that you can easily attach it to your motorbike.
Two variants – standard or XL
The mirror is available in two versions: standard and XL. What's the difference? The length of the mirror arm! The shorter arm looks super stylish, while the XL arm is ideal if your mirror mount is further in, such as on water-cooled Triumph models with 1-inch handlebars. Want a clear view to the rear? Then grab the XL version! You can find the exact dimensions below in the details and on the product images.
Pure innovation – no glass, no breakage!
These mirrors are unlike anything you've seen before. Thanks to a patented technology, the M.View Classic does not require any mirror glass at all. The mirror surface is directly incorporated into the aluminium – the metal is the mirror! The result? An ultra-thin, rimless design without any annoying frames. Broken glass? Not a chance! This is not only innovative, but also makes the mirror an absolute design highlight for every motorcycle.
No threads? No problem!
Do you ride a bike like the Triumph Bonneville T100 without mirror threads? No problem! In the category ‘Mirrors: Accessories, Holders & Adapters’ you will find the appropriate adapters to easily mount the mirror. For those who prefer clean handlebars, we recommend the Motogadget M.View Bar Clamp. This allows you to easily attach the mirrors to the top or bottom of the handlebars.
Installation tips for Triumph riders
Particularly with Triumph models such as the Bonneville LC, Bobber, Speedmaster or Scrambler 1200, you should be aware of the following: These bikes often only have a hole in the fitting instead of a thread. No problem – with our screw kit (see accessories) you can still mount the M.View Classic mirrors. And the XL version really makes sense for these models, as the mirror mount is often located far to the inside.
Tip for BMW R12 models:
For those who value a very good rear view more than the look, we recommend ordering the XL version of the mirror. With the standard 150mm version, you can still see something to the rear, but you have to turn your shoulder a little.
Technical details at a glance:
Mirror body: width 122 mm, height 83 mm, thickness 4.5 mm
Mirror arms: standard 150 mm / XL 180 mm
StVZO-compliant: meets the legal requirements and has an ECE marking – you don't need to register it!
Price is per unit.
Motogadget M.View Bar Clamp Mirror Adapter
CB11633
/ RS0
€29.00*
The M.View Bar Clamp mirror adapters allow the mounting of all mirrors with M10 x 1.25 thread (this is the standard thread for accessory mirrors) on motorcycles without a mirror thread in the fittings. Or for customizers who want to give their handlebars a clean look and want to replace the original shots-Perfectly suitable are the beautiful M.View mirrors from our program (see accessories in this description). With these adapters the mirrors can be mounted both upwards and downwards (if there is enough space for the tank).The m.view bar clamp is delivered as a single piece. It fits perfectly to our handles m.grip, the handlebar end indicator m.blaze disc as well as the push button fittings m.switch and m.switch mini. The assembly takes place directly on the handlebar tube (22 mm, 7/8 and 1 inch).For two mirrors please order 2 m.view bar clamps.
Motogadget M.View Race Mirror
CB11678M
/ RS0
€129.00*
Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads are contained (1x screw M10x1,5, 1x screw M10x1,25 right thread, 1x screw M10x1,25 left thread), in order to be able to mount the mirror also at each Bike, which has a mirror thread.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without a mirror thread (like e.g. a Triumph Bonneville T100), you will find suitable adapters for your motorcycle in the category "Mirrors: Accessories, holders & adapters". If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This makes it possible to mount the mirrors on the handlebars both upwards and downwards.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).
DimensionsWidth of mirror body: 129 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: 150 mmWeight: 175 gThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE mark. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Sport 60
CB11835
/ RS0
€129.00*
Motogadget M.View Sport handlebar end mirror WITH E-number. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technique! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings a bit inwards). Or you order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation if no handlebar end indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror arms are made to the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you assemble everything.
Dimensions:Width of mirror body: 122 mm Height of mirror body: 83 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 128 g
The size of the mirror surface of the m.view spy does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles. Price per piece.
Motogadget M.View Cruise Mirror
CB11836
/ RS0
€99.00*
Motogadget M.View Cruise handlebar end mirror WITH E-number in a classic, oval design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a whole new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted both upright and down on the handlebars (fits left & right). The mirror arm also swivels, making it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).
The mirror clamps are the same size as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.
Dimensions:Width of mirror body: 114 mm Height of mirror body: 80 mm Thickness of mirror body without ball head: 4,5 mm Length of mirror arm: 60 mm Clamping diameter: suitable for 22 mm and 1 inch handlebars Clamping width: 10 mm Weight: 125 g
Price per piece.
Motogadget Mo.View Classic 60 Mirror
CB11837
/ RS0
€99.00*
Motogadget Mo.View Classic 60 handlebar end mirror with E-number in classic, round design. Fits all 22mm & 1" handlebars.
These new and beautiful Motogadget mirrors have a brand new mirror technology! They come completely without mirror glass. The special thing about this mirror is the patented mirror surface, which is directly on the metal of the body. The aluminium itself is the mirror surface! This allows a weightless design without edge and frame and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found! These mirrors are really an absolute highlight on every motorcycle!
The mirror can be mounted either upright or down on the handlebars (fits left & right). The mirror arm is also swiveling, which makes it easy to mount the mirror in a perfect position.
Mounting:
You can clamp the mirror directly around the handlebars (just push the fittings inwards a little for this).
Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebar (see accessory article in this description). This widening also provides a perfect handlebar end (our absolute recommendation if no handlebar end turn signals are mounted).
In addition, there is an adapter that allows you to mount both the bar end mirrors and the Motogadget bar end turn signals without having to push the fittings further inwards. So a handlebar widening to mount the outside still a receptacle for the M.Blace Disc turn signal. (See Motogadget Disc / Cone Adapter in the accessories of this description).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror clamps are made in the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so you have completely edge-free transitions when you mount everything
Dimensions:Diameter of mirror body: 96 mm Thickness of mirror body without ball head: 4.2 mm length of the mirror arm: 60 mm diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g
Price per unit.
Motogadget M.View Blade Mirror
CB12543
/ RS0
€99.00*
Motogadget M.View Blade handlebar ends. The small round one in the tiny design (such a small and filigree mirror, in which one sees nevertheless still quite well, we had never in the program ) for 22mm & 1" handlebars.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!The mirror can be mounted both upright and down on the handlebars (fits left & right). You can clamp the mirror directly around the handlebars (just push the fittings inwards). Or you can order the Motogadget mirror widener, which makes it possible to mount the mirror at the handlebar end (see accessories in this description). This widening also offers a perfect handlebar end (our absolute recommendation! if no handlebar ends indicators are mounted).
Info BMW R nine T models: For the original handlebars of all R9T models there are two special adapters / handlebar extensions which fit plug & play into the original handlebars. There is the Cap Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards), Disc Adapter (handlebar extension for mounting the handlebar end mirrors without pushing the dashboard inwards + mounting the handlebar end indicators).The mirror arms are made in the same size as the Motogadget handlebar ends turn signals and Motogadget handlebar grips, so you have completely edge free transitions when you mount everything.Dimensions:Diameter of mirror body: 75 mmthickness of mirror body without ball head: 4 mmLength of mirror arm: 61 mmClamping diameter: suitable for 22 mm and 1 inch handlebarsClamping width: 8 mmThe size of the mirror surface of the m.view blade does not correspond to the StVZO. Therefore only suitable for non-EU countries or show vehicles.Price per piece.
Triumph 3D lettering
CB11621M
/ RS0
€49.00*
Original Triumph 3D sticker.
The lettering is 130 mm long and 20 mm high (on the sheet it is still. The 3D style (sticker is raised and made of thick plastic) gives the sticker a particularly high-quality look. Perfectly suitable for e.g. tank or side cover.
The stickers are sold individually (i.e. the price is for one sticker).
High Mount Front Fender/Mudguard Bracket
CB11615
/ RS0
€58.95*
The right look for every scrambler! On a reasonable Off Road Scrambler conversion, you simply need a raised front wheel fender as you know it from any Cross machine.The holder is made of stainless steel to guarantee a long durability and no breaks.Fits all air cooled Triumph models. The holder is simply mounted to the original triple clamp.We recommend either the Stripe or the Short fender from our range to match the kit (see accessories in this description).
Leather Key Fob
CB11594M
/ RS0
€20.95*
A very solid & high quality genuine leather key fob, with a thick metal hook in antique gold.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Leather Key Fob
CB11595M
/ RS0
€35.95*
Genuine leather strap with solid snap hook in antique gold tone. The strap is perfect to attach it on one side to your biker wallet, and on the other side to your trousers. So nobody can steal your wallet anymore and it also looks noble.You can also use the strap as a key ring.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Shoe Protector
CB11596M
/ RS0
€34.95*
Protect your good pedals from the gear lever! These shoe protectors made of real leather, you simply pull yourself over the shoe to protect it. Who doesn't know it? A fast round with the good shoes and zack one has a Macke in the shoe....
Shoe Safer Leather
CB12026M
/ RS0
€24.95*
Protect your good kicks from the gearshift!A somewhat simpler variant to the shoe protectors we already have in the program.Do not look quite as chic as the shoe protector, but fulfill their purpose just the same and are even easier to put on. Are held only with an elastic band. Made in Italy.
Shoe Protector Slip on
CB12299M
/ RS0
€34.95*
Protect your good kicks from the gearshift!
These shoe protectors made of genuine leather you simply pull over your shoe to protect it. Who does not know it? A quick round with the good shoes and bang you have a quirk in the shoe ...
The slip on version of the leather shoe protectors can be pulled over particularly quickly and are particularly well suited for boots. Due to the adjustable elastic straps, the protectors are suitable for any size of shoes.
Handelbar tape geniune leather
CB11591M
/ RS0
€37.95*
That's oldschool! Handlebar grips which are wrapped from genuine leather tape!That was otherwise only possible with a lot of manual work (and high costs) with a upholsterer.Now there is leather tape to wrap for everyone! The tape is equipped with 3M adhesive tape on the inside, so it simply sticks to the handlebar when winding. The tape is simply wrapped directly onto the handlebar & grass grip sleeve (if you don't want the grip so thick), or over the existing grip rubbers.The tape is pre-cut at the ends to fit, so that a nice winding pattern is easily added.
We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar articles in this description).Here's a video on how to wrap the ribbon in the best possible way.
Leg bag genuine leather
CB11592M
/ RS0
€114.95*
Take all your essentials with you for a short ride on your bike, without full pockets or a backpack on your back. This handcrafted genuine leather bag is easily attached to your thigh and belt with its adjustable strap. Does not disturb while driving absolutely, and is also hardly noticeable when carrying. The bag, which is made of very high-quality and thick leather, offers space for wallet, gloves, keys, a small camera and other small things. In addition, the bag has an easily accessible pocket on the back, with zipper for a mobile phone.Dimensions: 24 X 19 X 9 cm
We also have many other leather items, made of the same leather, in our shop. For example real leather handles (see similar items in this description).
Leather Tank Bag Magnetic
CB11598M
/ RS0
€109.95*
Beautiful magnetic real leather tankbag (Handmade!)Probably the most beautiful and practical tankbag you can buy.The genuine leather bag is attached to the tank with 6 strong magnets. Simply practical! Put it on and it is already fixed. Once properly pull on it and it is again off and can be taken along. On the back there is a loop to attach the bag to the belt.On the one hand very practical on every small trip to take his wallet, mobile phone, keys etc. with him, on the other hand just a chic bag that makes the bike more beautiful!
Additionally you can combine this tankbag with our new, slightly larger tankbag by simply placing it on top, which gives you even more storage space for additional luggage, see below under further accessories.We also have many other leather things, made of the same leather, in our shop. For example real leather handles (see similar items in this description).Dimensions: 18 cm X 14 cm X 5 cm
Attention: This does not work if an aluminium tank is installed. The BMW R9T Classic is equipped with an aluminium tank as standard.
Tank & rear bag leather magnetic
CB11958.1M
/ RS0
€169.95*
Beautiful magnetic genuine leather tank bag (handmade!) made of thick buffalo full leather, the big brother of the old tank bag.The tank bag can be used as a tank bag, as a rear bag (extra straps included) or as a shoulder bag.In addition, the smaller tank bag can be strapped on top as a supplement, just like the cell phone bag. Both products can be found under the accessories in this description.The real leather bag is attached to the tank with six strong magnets. Just practical! Put it on top and it is really firm, even at higher speeds. Just pull it once properly and it is off again and can be taken along. There is a loop on the back to attach the bag to your belt.With a capacity of 4.4 liters you can take a little more than your wallet, cell phone, keys, etc. On the one hand super practical, on the other hand an optical highlight, which you don't see on every corner and makes your bike unique.
Also included is a rain cover that you can pull over the bag if necessary.We also have many other leather items made of the same leather in our store. Like for example real leather handles (see similar items in this description).Dimensions: 22 cm X 19 cm X 10,5 cm Attention: Does not work if an aluminum tank is installed. The BMW R9T Classic has an aluminium tank as standard.
Mobile phone case leather magnetic
CB11959.1M
/ RS0
€39.95*
Finally there is a really chic and high quality cell phone case as magnetic version for the tank.The case is made of high quality buffalo leather, the workmanship is really great.Of course the case is also touchscreen friendly, so you can use the cell phone quickly.The cover can also be mounted in combination with our tankbag (will be attached to the top of the tankbag). Tank bag see accessories below in the description.We also have many other leather items made of the same leather in our store. Like for example real leather handles (see similar items in this description).Dimensions: 21 cm X 12 cm
Attention: Does not work if an aluminum tank is installed. The BMW R9T Classic has an aluminium tank as standard.
Turn signal holder standpipe 41 ⌀
CB12448
/ RS0
€54.95*
A pair of Motone die-cast aluminum turn signal clamps for all motorcycles with 41er fork diameter.
The clamps can be easily attached to the fork tubes within minutes. On the supplied turn signal bracket can then be attached to any accessory turn signal, with M8 or M10 thread. A very inconspicuous and chic way to mount small turn signals at the front of the. To be able to lay the turn signal cables as nicely as possible, we recommend still the cable fixers (see accessory article in this description) to order.
Magura Mx Fat Bar
CB11578M
/ RS0
€109.95*
The Magura Mx handlebar (suitable for all 22mm bikes) is the handlebar that gives the rider the most control and power over the bike and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position.You have to like it in any case to grab wide when driving, otherwise this handlebar is not the right one for you!In addition, the handlebars give the bike a very cool look with its straight and little cranked line. It almost looks like a motocross or a supermoto.We can only warmly recommend this handlebar! We also drive on our own Scrambler conversion. Simply exactly the right one for everyone who likes to drive sporty and likes the look!Since this is a FatBar handlebar (i.e. at the clamp it has 28mm diameter and then runs conically to 22mm towards the fittings), a new clamp is needed (see accessories in this description).Our recommendation here is the 35mm clamp, so you have the perfect sitting position on the bike.All wires & cables are long enough and do not need to be replaced.
Dimensions handlebar (see photo): a: 808mm b: 135mm c: 189mm f1: 120mm h: 63mm
Steering head nut CNC milled
CB11534M
/ RS0
€50.00*
Beautiful & noble steering head nut which can be easily exchanged for the original chrome-plated one. By milling from the full and the beautiful accent holes, the nut makes something real.Especially the black one!
Rizoma Cafe Racer LED taillight
CB11485
/ RS0
€82.00*
Rizoma LED Taillight in Cafe Racer Style.
Rizoma means: high quality, this also applies to this taillight. A chic, small LED aluminum rear light in deep black anodized, which is manufactured in the highest quality. Fits perfectly with all conversions, with a short fender in which a central tail light is to be installed (see attachment photo on the R9T).
License plate screw set
CB11444
/ RS0
€8.90*
These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly
Motul engine oil 5100 15W-50
CB11438
/ RS0
€65.00*
A top oil on a partly synthetic basis
4-stroke motorcycle engine oil based on Technosynthesis® with ester technology. Exceeds the requirements of motorcycle manufacturers such as Triumph which for certain models prescribe the viscosity SAE 15W50. Excellent shear stability protects the engine and transmission and allows smooth shifting. JASO MA2 tested, guarantees a perfect function of the wet clutch.
Motul engine oil 300V 15W50
CB11439
/ RS0
€89.00*
The best oil in our view, for the Triumph air-cooled Twins
Fully synthetic 4-stroke motorcycle engine oil. 300V Factory Line engine oil takes advantage of ESTER Core® technology for maximum power output without compromising on reliability and wear. With the selection of special synthetic esters and the combination of an innovative additive package MOTUL achieves the perfect synergy in terms of engine, transmission and clutch. Significantly reduces oil consumption in old high-mileage engines. Exceeds the requirements of JASO & API JASO T903 Annex A (JASO MA friction coefficient requirements)
Rizoma grips Urlo 22mm
CB11383M
/ RS0
€91.00*
Rizoma Urlo handles in 22mm made of billet aluminum. With integrated rubber, which together with the ergonomic shape ensures optimum grip.
For BMW R9T models: Extra adapters are required for installation (see accessories in this description).
Rizoma Grips Urlo 1" inch
CB11384
/ RS0
€135.00*
Colour:
Black
Rizoma Urlo Grips 1 "made of billet aluminum with integrated rubber, which together with the ergonomic shape for an optimal grip.
In these handles, an outer cap is with it almost serves as the handlebar end, which can be easily screwed into the handle.
Rizoma Grips Legend 22mm
CB11385M
/ RS0
€92.00*
Rizoma Legend handles in 22mm billet aluminum made in classic design. With integrated rubber, which together with the ergonomic shape ensures optimum grip.
For BMW R9T models: Extra adapters are required for installation (see accessories in this description).
Rizoma Grips Legend 1"
CB11386M
/ RS0
€92.00*
Rizoma Legend handles in 1 "made of billet aluminum in a classic design with integrated rubber, which together with the ergonomic shape provides an optimal grip.
Rizoma 30 Gradi Grips
CB11872M
/ RS0
€84.00*
Rizoma 30 Gradi handles in 22 mm made of billet aluminium. We at all parts of Rizoma are also the highest quality handles! Only the highest quality materials are used. The new 30 Gradi handles have a very special shape. They are not completely round like most handles, but slightly oval and twisted. This makes them especially good to hold and the ball of the hand has a comfortable contact surface.We have already tested it ourselves and it really feels great!
For BMW R9T models: Extra adapters are required for mounting (see accessories in this description).
Rizoma ICON Grips
CB11873M
/ RS0
€95.00*
Rizoma ICON in 22 mm made of billet aluminium. We at all parts of Rizoma are also the handles of the highest quality! Only the highest quality materials are used.
The ICON grips have a very high quality rubber pad and light cut-outs for the fingers, which gives a very good grip feeling.
For BMW R9T models: Extra adapters are required for mounting (see accessories in this description).
Shift lever adjustable
CB11365M
/ RS0
€74.95*
Gear lever for all air-cooled Bonneville & Scramblers. This shifter is individually adjustable in length for different shoe sizes.
Rizoma liquid container NEXT
CB11355M
/ RS0
€92.00*
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet aluminum with a perfectly integrated glass insert.
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma liquid container
CB11356M
/ RS0
€79.00*
Rizoma NEXT Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma liquid container
CB12118M
/ RS0
€84.00*
Rizoma Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma liquid container Notch
CB11978.2M
/ RS0
€93.00*
Rizoma Notch Brake Fluid Reservoir WITH ABE. Made of high quality billet with eyeglass
The holder CT450 is required for mounting on the Thruxton R, SpeedTwin & Scrambler 1200. The holder CT454 is required for mounting on StreetTwin or Scrambler. For universal mounting in a custom conversion simply take a suitable holder (see accessories).
Rizoma Radial RS Mirror AC
CB11348M
/ RS0
€175.00*
Rizoma Radial RS mirror With e-number. The mirror is made of very high quality billet aluminum in a 3D process. The surface of all Rizoma mirrors is unique due to its fine milling structure. You can see and see at a glance the high quality of these mirrors. Due to the ingenious fastening system the Rizoma uses here, the mirror does not stand as far up and becomes like mouse tubes. It runs smoothly over the handlebar. The shape is a beautiful classic drop shape shape.
An additional adapter is required to mount the mirror (see accessories).
The price is for a mirror.
Rizoma Dynamic Mirror AC
CB11349.1M
/ RS0
€95.00*
Rizoma Dynamic mirror in minimalist design . The mirror is made of very high quality billet aluminum in a 3D process. Who knows the brand and the parts of Rizoma, knows the high quality of the mirrors. Due to the ingenious fastening system the Rizoma uses here, the mirror does not stand as far up and becomes like mouse tubes. It runs smoothly over the handlebar. The mirror is beautifully small in a retro style. Due to the additional flat mounting the mirror falls only minimally.
An additional adapter is required to mount the mirror (see accessories).
The price is for a mirror.
Rizoma Cap Handlebar endweight
CB11312.1M
/ RS0
€48.00*
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro
The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope.
For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).
Hiflo oil filter Triumph
CB11306
/ RS0
€8.90*
TÜV tested oil filter from Hiflo suitable for all Triumph Modern Classic models.
Hiflo filter in original equipment quality.
We recommend to change the sealing ring when changing the oil to ensure 100% tightness. The matching sealing ring can be found under the accessories in this description.
Indocator holder universald
CB11295M
/ RS0
€21.95*
Universal indicator holder for mounting the indicators on the rear of the licence plate. The holder is 17.5 cm wide.
The holder is made of aluminium and coated in black powder.There is a very practical slot in the two indicator holes, which makes it possible to fit indicators without having to disconnect the cable.The holder also has two slotted holes so that it can be easily attached to your licence plate screws without having to drill any holes.
The indicator holder is available with either an 8 or 10 mm hole. This refers to the thread size of the indicators. Most accessory indicators have an 8 mm thread. The indicators from our range with conventional halogen bulbs (such as the Drops or Arizona indicators) still have a 10 mm thread.
Rizoma Handlebar Indicators
CB11292.1M
/ RS0
€72.00*
Rizoma Alu steering wheel indicator.
These beautiful blinkers fit into all the bumpers and ensure a very clean look in the motorcycle front, since there is no need for normal blinkers.
For rear they do NOT count as a turn signal. With a correspondingly wide handlebars, these will look good from the rear, however.
The price is for a single turn signal.
Rizoma Extrem Footpegs
CB11280M
/ RS0
€86.00*
The round Rizoma "B-PRO" catches are provided with an extra-grip knurling. The plastic cap at the end of the catch is interchangeable. Made from Billet ALuminium
ATTENTION! Model-specific catches must also be ordered (see accessories in this description).
Rizoma Snake footpegs
CB11281M
/ RS0
€85.00*
The Rizoma "Snake" rests are beveled, very delicate sports rims made of billet aluminum. The ribbing on the notches ensures a particularly good hold.
ATTENTION! Model-specific catches must also be ordered (see accessories in this description).
Rizoma STREET footpads
CB11282M
/ RS0
€255.00*
The Rizoma "RALLY" footrests are really nice radical cross footrests. Just the right thing for a scrambler conversion! Made from high quality billet aluminum.The footrests give you exactly the grip you need when you're off-road! Especially when you ride standing up.Of course they look perfect for every scrambler conversion!ATTENTION: You have to order model-specific detent holders (see accessories in this description).
Rizoma crash pads
CB11267
/ RS0
€279.00*
A pair of engine crash pads for mounting on the engine. At last times crash pads which fulfill their purpose and still do not mess the optics. They are made of billet aluminum and are kept very small in order to minimize as much as possible, but still offer full protection.
Rizoma IRIDE Indicators
CB11270M
/ RS0
€72.00*
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Rizoma IRIDE taillight / turn signal
CB11271M
/ RS0
€105.00*
Beautiful classic taillight / winker combination "IRIDE" from Billet aluminum from Rizoma in all top top quality. State-of-the-art technology makes it possible to incorporate both rear light, brake light and turn signals in one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Rizoma CLUB S Taillights / Indicators
CB11273M
/ RS0
€94.00*
Rizoma "CLUB S" Taillight / turn signal combination of billet aluminum in all top top quality. MDas is what we want Modern Classic fans! Modern small turn signals in a classic round design. Modern technology makes it possible to integrate the taillight, the brake light and the turn signals into one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Rizoma LEGGERA S Taillights / Indicators
CB11279.1M
/ RS0
€92.00*
Rizoma "LEGGERA" taillight / turn signal combination of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forgo safety and a noble workmanship. State-of-the-art technology makes it possible to incorporate both rear light, brake light and turn signals in one (LEGAL). This means there is no need for a central taillight. This makes for a completely clean tail which looks very good for some conversions! And thanks to the particularly bright LEDs, the turn signal is also seen very well when the rear light is also lit.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.
Rizoma CLUB Indicators
CB11272M
/ RS0
€82.00*
Rizoma "CLUB" Mini turn signals made of billet aluminium in highest top quality. This is what we modern classic fans want! Modern small turn signals in a classic round design.The turn signals shine very brightly by modern LED technology and are seen so despite their small size very well.The turn signals are E-numbered and therefore road legal. The price is for a single turn signal.Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.The turn signals are optionally available with white position light (only for front!) or without.
The indicators are sold individually.A resistor is included in the scope of delivery.
Rizoma LEGGERA Indicators
CB11274.2M
/ RS0
€80.00*
Rizoma "LEGGERA" Mini Blinker made of billet aluminum in top quality. Minimalist blinkers for anyone who wants to have them as inconspicuous as possible, but do not want to forego safety and a noble workmanship. The turn signals are very bright thanks to modern LED technology.
The turn signals are with E-number. The price is for a single turn signal.
Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals.
If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description).
The indicators are sold individually.