Drilling template fittings / handlebars R9T
€49.95*
Available, delivery time: 1-3 days
Zubehörartikel
€475.00*
from €89.95*
€109.95*
from €89.95*
€509.00*
from €89.95*
from €89.95*
| item number: | 902DT03 |
| Shop-number: | CB11752 |
Product information "Drilling template fittings / handlebars R9T"
When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place.
Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.
| Models BMW R nineT: |
|
|---|
| BMW R nineT |
R nineT /5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Roadster EU 3
R nineT Roadster EU 4
R nineT Roadster EU 5
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12
R12 G/S
R12 S
R12 nineT
|
600
600
600
600
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Rizoma Stub R9T Classic
CB11240
/ RS4
€475.00*
An absolute must for anyone who wants to make his R9T a real CafeRacer. Because this is simply a mute bucket, there is no way around! These give the R9T a nice flat and coherent line, as it is for a CafeRacer.
The highest quality in the processing and the finest material is used here by Rizoma in the stumps.
Of course with TÜV certificate.
If you mount the stubs, we recommend to order the caps for the original handlebar mount. This makes the original fork bridge look as if it were without recordings. (see accessories)
Cross Bar Handlebar 805mm
CB11508M
/ RS1
From
€89.95*
The crossbar is slightly flatter, wider and slightly less inclined towards the rider than the original handlebar (the original width of teh R9T handlebar is 780 mm).
The handlebars provide a more front-wheel-oriented riding position, giving the rider more control over the front wheel and the motorcycle. The 25 mm more width also gives the rider more control over the motorcycle, resulting in a more active riding experience. Sitting further forward means sportier, but not more uncomfortable! For many riders, this riding position is even more comfortable than an upright riding position.
The handlebars are made of aluminum and are supplied with ABE. All cables and wires fit, i.e. the handlebars can be easily replaced. The original handlebar end caps no longer fit (we recommend using the Rizoma handlebar end weights or converting to handlebar end indicators - as on the motorcycle in the pictures / see accessories in this description).
The handlebars have a beautiful matt pearlescent finish in both black and silver.
In order to be able to mount the original fittings, 2 small holes must be drilled in the handlebars (these must be exactly opposite each other). We offer a drilling template with which these holes can be drilled quickly and easily. See accessories in this description.
Attention a 28.6mm Fat Bar clamp is required!
Attention, if your motorcycle does not have a Fat Bar handlebar clamp ex works (the handlebar has a diameter of 28mm in the middle and 22mm on the outside), you must also order a Fat Bar handlebar mount. This is the case, for example, with a Street Twin / Speed Twin 900 or the Triumph Scrambler 865.On all BMW R nineT models, Triumph Speed Twin 1200, Street Scrambler / Scrambler 900, the handlebars can simply be replaced with the original handlebars.
Magura Mx Fat Bar BMW R9T
CB11667M
/ RS0
€109.95*
The Magura Mx handlebar is the handlebar that gives the rider the most control and power over the motorcycle and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position.You have to like it in any case to grab wide when driving, otherwise this handlebar is not the right one!The handlebars also give the bike a very cool look due to its straight and slightly crooked line. It almost looks like a motocross or a supermoto.We can only warmly recommend this handlebar! We also drive on our own Scrambler conversion. Just the right thing for everyone who likes to drive sporty and likes the look!Dimensions handlebar (see photo): a: 808 mm b: 135 mm c: 189 mm f1: 120 mm h: 63 mmThe handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.
Handlebar Tour X-Bar
CB10633M
/ RS3
From
€89.95*
Tour X-bar handlebar XB 3 Dimensions: 780x200 x 85
The perfect allrounder handlebar for all R9T´s . You sit much more relaxed on the motorcycle, making it much more suitable for touring. In addition, the bike is more controllable & rideable as you have more feel to the front wheel. This handlebars does not choose as much from the original as the other two handlebars we offer. However, it offers a much more comfortable grip due to its more active cranking.
The handlebar is made of aluminium and comes with ABE. All cables and pulls are sufficient (i.e. the handlebars can easily be exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).
In black as well as in silver the handlebars have a nice, matt pearl blasted surface.
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.
Comfort stub R9T Racer
CB11479
/ RS6
€509.00*
The conversion includes a ready-to-mount clip-on handlebar KIT including a new CNC-milled, upper triple clamp in gp Racing style and all additional attachments required. After mounting, the handlebar stems are about 5 cm higher than the standard version. The handling also improves because the entire handlebars increase by about 8 cm in width. This results in a much more comfortable, but still sporty seating position on the motorcycle.
All attachments are high quality black anodized and come with parts certificate and mounting instructions. Thus, nothing is in the way of an entry in the vehicle documents
Nakedbike Handlebar 790mm
CB11509M
/ RS2
From
€89.95*
The Naked Bar lies between the original handlebar and the CrossBar a little bit flatter than the original one & slightly wider (790mm) than the original one (original width is 780mm). However, the handlebar does not rise as steeply to the ends as the original one. This makes for a better line (because the handlebars look nice and straight) and also for a better riding feeling.In our opinion, this is the best handlebar for the R9T for a good driving experience. The handlebar comes closest to the well known Roadster handlebar which we use a lot for the Triumph models.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily replaced. The original handlebar end caps don't fit anymore (here we would recommend to use the Rizoma handlebar end weights or to convert to handlebar end indicators like on the motorcycle in the pictures / see accessories article in this description).Both in black and in silver, the handlebar has a beautiful matt pearl blasted surface.
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.
Alu Handlebar Fat Bar 760mm BMW R9T
CB11668M
/ RS1
From
€89.95*
The Fat Bar handlebar is as wide as the original BMW R9T handlebar. However, it is a bit flatter and grader than the original. So you get a more front wheel oriented seating position and optically a flatter line.The Fat Bar is similar to the Cross Bar: same height, a bit narrower and a bit more cranked to the driver.Dimensions: 780mm wide 70mm high 155mm offset.The handlebar is made of aluminium and comes with ABE. All cables and cables are sufficient (i.e. the handlebars can be easily exchanged). The original handlebar end caps will no longer fit (here we would recommend to take the Rizoma handlebar end weights or to convert to handlebar end indicators - as with the motorcycle on the pictures / see accessories article in this description).In black as well as in silver the handlebars have a nice, matt pearl blasted surface.
In order to install the original fittings, 2 small holes must be drilled into the handlebars (these must be placed exactly opposite each other). We offer a drilling template to make these holes fast and easy. See accessories in this description.