Skip to main content Skip to search Skip to main navigation

Roadster handlebar 1"

Product information "Roadster handlebar 1""

LSL Roadster handlebars 1" 810 mm wide & 80 mm high. available in chrome or black. All cables & lines fit the Bonneville, so nothing needs to be replaced or modified. On the Thruxton, the throttle cable must be relocated to the right-hand side of the frame and a longer brake hose and clutch cable must be fitted.

The Roadster handlebars are our absolute recommendation for every Bonneville with 1" handlebars. On the one hand, the handlebars look exactly right for our motorbikes thanks to their offset and height, and on the other hand, they are simply awesome to ride! If you turn it up, the handlebars provide a riding position that gives you a lot of feeling for the front wheel (perfect for those who like to be faster in the bends).
If you turn the handlebars further down (towards the rider), they become the ideal cruiser handlebars, giving a nice flat line (see photos of the aluminium motorbike).

The original handlebar end weights can no longer be used, as the original handlebar has a thread welded in and every accessory handlebar is hollow inside. Therefore, new ones are required in order to have a clean handlebar end (see accessory products in this description).

ABE - road approval

The StreetBar handlebars have an ABE for some models and do not need to be registered separately for these.
For all models that are not covered by the ABE, the handlebars must be registered by the TÜV (but this is not a problem).
You can download the ABE under Downloads and search for your model

Models Triumph AC until 2015:
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Speedmaster / America
  • Thruxton 900 EFI
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Bonneville T100
  • Bonneville T120
  • Speedmaster
  • Thruxton 1200
Triumph AC bis 2015
Bonneville T100 EFI
Bonneville T100 Vergaser
Speedmaster / America
Thruxton 900 EFI
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Thruxton 1200
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

Rizoma Cap Handlebar endweight CB11312.1M / RS0
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

From €39.00*
Rizoma Cap Handlebar endweight CB12903 / RS5
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

€34.95*
Handlebar Weights Flat Cap for Steel Handlebar CB00187.2M / RS100
LSL handlebar weights chrome or black for 1 , 22mm steel handlebar pair. Internal thread at the original socket must be removed or bored.

From €24.95*