€0.00*

LSL Classic Spiegel - Paar

Skip image gallery

€139.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
€22.95*
€27.95*
€39.95*
from €39.95*
item number: 132SNON2SW
Shop-number: CB12626

Product information "LSL Classic Spiegel - Paar"

Ein Paar klassische Aluminium Spiegel aus dem Hause LSL. 

Die LSL Classic Spiegel kombinieren ein klassisches, rundes Design mit moderner Technik und Verarbeitungsqualität. 
Das Spiegelgehäuse ist mit knapp 10mm schön flach, aber auch nicht zu flach, weil zu einem klassischem Umbau ein Spiegel auch nicht zwingend maximal flach seien muss.
Spiegelgehäuse und Spiegelarm sind in einer schönen, matten Oberfläche (wird durch Glasperlen strahlen erreicht) hergestellt. 

Der Spiegelarm hat an der Verschraubung eine sehr praktische Winkel Verstellung eingebaut, das es ermöglicht den Spiegel individuell im Winkel einstellen zu können.
Für die Optik ist das ein wichtiges Detail, denn so stehen die Spiegel nicht so weit nach oben ab (was sonst schnell aussieht wie Mickymaus Öhrchen). 

ACHTUNG, für manche Modelle werden Modell spezifische Adapter benötigt (einige sind unter den Zubehörartikeln dieser Beschreibung zugeordnet), wenn ihr euch nicht sicher seid, ob ihr welche benötigt oder nicht, ruft uns einfach an wir helfen gerne weiter. 

 

Maße: 
A/B Breite Kopf: 102 mm 
C Gesamtbreite: 180 mm 
D Gesamthöhe: 170 mm 
Stiellänge: 100 mm bis zum Knick, dann 100 mm bis zum Gelenk 
Gewicht: 210 g 

Lieferumfang: 1 Paar inkl., 
2x M10x 1.25mm Rechtsgewindeadapter 
1x M10x 1.25mm Linksgewindeadapter

BMW R12
R12
R12 G/S
R12 S
R12 nineT
Triumph 400er
Scrambler 400
Speed 400
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Mirror Mounting + Widening Valves without thread LC
Mirror Mounting + Widening Valves without thread LC CB11759 / RS0
Mirror adapter for mounting accessory mirrors to Bonneville T100 & T120, Bobber & Speedmaster. These models do not have a conventional mirror thread in the fittings, but only a hole, therefore an additional adapter is required for mounting accessory mirrors.This adapter is attached to the mirror hole in the fitting with the screw + nut supplied. In the adapter is then a conventional M10 thread, with which almost all accessory mirrors can be mounted.In addition, the adapter is also a widening for the mirror holder by 40mm. This is also necessary for the fittings of the Bonneville, Bobber & Speedmaster, because the bore is very far inside and the original mirror has a very long arm.If you install an accessory mirror simply in the place of the original mirror (without widening) you see virtually nothing to the rear.

€22.95*
Mirror adapter
Mirror adapter CB00567 / RS600
Some of the air-cooled Triumph models have only one hole in the fitting to accept the original mirrors. Accessory mirrors from the after market, however, all need a thread to be able to mount them. With these adapters, that's no problem. The adapter is simply inserted into the hole in the handlebar fitting and screwed tight from below. Then you have above the handlebar a mirror thread and can thus mount any accessory mirror from our range.

€27.95*
Fitting clamp with mirror thread Triumph Milled
Fitting clamp with mirror thread Triumph Milled CB12227 / RS0
This CNC machined aluminum clamp replaces the original armature clamps. Fits all Triumph models with 22mm handlebars. The clamps look much nicer on the one hand, because they are milled very high quality aluminum and have a beautiful, indicated T - logo. The mirror thread is M10 x 1.25 which allows you to mount all common mirrors from the accessories market as well as the original. Some models, such as the Triumph Speed Twin & Thruxton R, have no mirror thread from the factory (because they have handlebar end mirrors mounted). If you want to mount a normal mirror on such a model, you need a new adapter with thread. Of course, such a milled clamping is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black glossy (matching the original fittings) anodized & in the aftermath, the T - logo is milled again. The clamps look very classy on the handlebars. The threaded adapter for the mirror we have extra round Designed, which gives you a much nicer transition to most mirrors, as with most other adapters on the market, which are simply angular. To the Motogadget M.View mirrors, the transition is perfect. The adapters are sold individually.

€39.95*
Fitting clamp with mirror thread BMW Milled
Fitting clamp with mirror thread BMW Milled CB12225M / RS0
This CNC machined aluminum clamp replaces the original armature clamps. Suitable for all for all BMW R9T models. The clamps look much nicer on the one hand, because they are very high quality milled from aluminum and have a nice, indicated BMW logo. In addition, the thread is a good bit shorter than the original part, which means that the mirror no longer sticks out so high.The mirror threads are M10 x 1.25 which allows you to mount all common mirrors from the accessories market. Of course, such a milled clamping is not noticeable at first glance on the bike, but exactly on this area you look as a driver when driving all the time. The adapters are black matt (matching the original fittings) anodized & in the aftermath, the BMW logo is milled again. The clamps look very classy on the handlebars. The threaded adapter for the mirror we have extra round Designed, which gives you a much nicer transition to most mirrors than most other adapters on the market, which are simply angular. To the Motogadget M.View mirrors, the transition is perfect. The adapters are sold individually. Note for the R12 models with SOS button: The button can simply be unscrewed, then the original clamp can be replaced with the CNC-milled one.

From €39.95*
Details