Motogadget Motoscope Tiny

€269.00*

Available, delivery time: 1-3 days

Ring Colour

item number:	5001010
Shop-number:	CB00227

Product information "Motogadget Motoscope Tiny"

The motoscope tiny is a very small, analogue speedometer in 49mm format. It measures speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of just 24 mm open up a wide range of installation options. Sophisticated technology makes the classic look possible without compromise. The dial has no display cut-out or LCD and has a convincing classic-style look. The perfect solution for purists and minimalists.

Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under accessories in this description).
In addition, an additional box is required to connect the speedometers on many motorbikes (also found under accessories).
Model-specific descriptions can be found below the general description.

The high-quality aluminium housing is machined from solid material and its surface is anodised black. The screw ring is also available in black anodised or highly polished.
The case is 100% waterproof and insensitive to vibrations.

The analogue dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when the watch is in operation and is not visible when it is switched off.

The brightness of the LEDs is automatically adjusted to optimise readability in darkness, sunlight and twilight.
If the 200 km/h on the analogue scale is exceeded, the speed is automatically shown on the LED display. The maximum speed is also memorised.
The 4 indicator lights (blue, red, 2 x green) are also integrated into the dial. These also only become visible during operation.

Triumph LC

Zur Montage eines Motogadget Tachos an einer der Wassergekühlten Triumph Modern Classic Modelle ist es zwingend notwendig die Zusätzliche Tacho Box LC zu verbauen.
Diese findet ihr unter den Zubehörartikeln in dieser Beschreibung.
Für die Bobber & Speedmaster bieten wir ein Plug & Play Halteblech zur Montage des Tachos an der originalen Gabelbrücke.
Für alle anderen Modelle muss kann man sich das universal Halteblech als Basis bestellen.
Wird der Tacho nicht in einer Lampe versenkt, muss noch der Außenbecher oder der Stremline Cup dazu gestellt werden.

Triumph AC

Bei allen Modellen die ab Werk einen Tacho mit LCD Anzeige (Kilometer Zähler) haben, ist eine Zusätzliche Break-Out Box zum Anschließen notwendig. Diese Box findet ihr auch unter den Zubehörartikel in dieser Beschreibung.
Sollte deine Triumph ab Werk eine Tachoschnecke haben, bieten wir den Spacer an (dieser erlaubt dir die Tachoschnecke auszubauen). Siehe Zubehörartikel in dieser Beschreibung.
Unter den Zubehörartikel findet ihr ein Plug & Play Blech zur Montage des Tachos an die originale Gabelbrücke. Außerdem gibt es noch ein Universal Blech zum Anpassen.
Wird der Tacho nicht in einer Lampe versenkt, muss noch der Außenbecher oder der Streamline Cup dazu gestellt werden.

BMW R nine T

Zur Montage an einer BMW R nineT wird die Zusätzliche Box: Motogadget Mo.Hub BMW R9T benötigt.
Wir empfehlen hier aber da komplette Kit zu bestellen (siehe ähnliche Artikel in dieser Beschreibung).

Models BMW R nineT:	R nineT /5 EU 4 R nineT Classic EU 4 R nineT Pure EU 4 R nineT Racer EU 4 R nineT Scrambler EU 4 R nineT Scrambler EU 4. R nineT Urban GS EU 4
Models Triumph AC until 2015:	Bonneville SE Gussrad Bonneville T100 EFI Bonneville T100 Vergaser Scrambler EFI Scrambler Vergaser Speedmaster / America Thruxton 900 EFI Thruxton Vergaser
Triumph LC models from 2016:	Bobber Bobber Black Bonneville T100 Bonneville T120 Speed Twin - 1200 Speedmaster Street Cup Street Scrambler Street Twin Thruxton 1200 Thruxton 1200 R

Triumph AC bis 2015	Bonneville SE Gussrad Bonneville T100 EFI Bonneville T100 Vergaser Scrambler EFI Scrambler Vergaser Speedmaster / America Thruxton 900 EFI Thruxton Vergaser
Triumph LC ab 2016	Bobber 16" / Bobber Black EU 4 Bobber 16" / Bobber Black EU 5 Bobber 16" / Bobber Black EU 5 + Bobber 16" / Bobber Black Euro 5 + / BJ 2026 - Bobber 19" Bonneville T100 EU 4 Bonneville T100 EU 5 Bonneville T100 EU 5 + Bonneville T120 EU 4 Bonneville T120 EU 5 Bonneville T120 EU 5 + Scrambler 900 / Street Scrambler EU 4 Scrambler 900 / Street Scrambler EU 5 Scrambler 900 / Street Scrambler EU 5 + ( BJ 2025 ) Scrambler 900 / Street Scrambler EU 5 + ( BJ 2026 - ) Speed Twin 1200 EU 4 Speed Twin 1200 EU 5 Speed Twin 1200 EU 5 + Speed Twin 1200 RS Speed Twin 900 / Street Twin EU 4 Speed Twin 900 / Street Twin EU 5 Speed Twin 900 / Street Twin EU5 + Speedmaster EU 4 Speedmaster EU 5 Speedmaster EU5 + Street Cup Thruxton 1200 Thruxton 1200 R

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Accessories

Motogadget Breakoutbox CB00216M / RS8

Motogadget. Break-Out Box. For connecting Motogadget instruments to the fuel-injected models with electronic speedometer. Tested by us for 2010/11+2012/13/14/15. Please state motorbike type and chassis number when ordering! It does not need to be soldered, but must be connected consistently according to our enclosed instructions. The CAN bus installed in the Triumph models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Indicator left/right, fuel reserve, fault memory, high beam, neutral, H2O hot, oil pressure.Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are simply connected to the terminals of the mo.tri using a colour scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A great time saver and therefore worth hard cash. PLEASE STATE YEAR OF MANUFACTURE AND CHASSIS NUMBER!

€199.00*

Details

Cup for Motogadget Speedster & Tiney CB00233M / RS109

Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

From €39.00*

Details

Motogadget Tiny Bracket Bobber & Speedmaster CB12214 / RS0

Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

€39.95*

Spacer CB00269M / RS200

Spacer front wheel; as a replacement for speedometer worm after installing a digital speedometer

From €24.95*

Details

Streamline Cup CB11481M / RS600

The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.

From €88.99*

Details

Bracket black CB00231M / RS108

From €39.90*

Details

Speedo Box LC CB12215M / RS0

With the Peak Mod Speedo Box LC it is possible to connect all Motogadget speedos to the water-cooled Triumph Modern Classic models (to date the boxes are not yet available for all Euro 5 models. But some are already available. To be on the safe side, you are welcome to ask us about availability for your motorbike before ordering). We have already fitted the box to several motorbikes ourselves and it works really well. The installation and wiring are really well described and easy to understand. You can also find the installation instructions and wiring diagram as a download in the downloads section of this description. This will give you an idea of the effort involved in advance. We recommend mounting the speedo box under the motorbike tank, as there is enough space and all cables are easy to route.The box is available as a single and dual version. Single: For all models that only have one speedometer fitted ex works Dual: For all models that have a speedometer and rev counter fitted ex works.When ordering, please specify your motorbike model + year of manufacture in the comments field (on the last page of the ordering process)! For Triumph Bobber & Speedmaster we also offer a mounting plate with which you can mount a Motogadget Tiny - Speedster - Vintage speedometer on the fork bridge (see accessory article in this description).For all other models, you will have to build your own plate. Note on grip heating: If the speedometer box is installed, the original grip heating will no longer work (an additional module is required for this). We sell the box in 2 versions:1. as a bundle at a reduced price of 100€ (this price is only granted if a Motogadget speedometer instrument is also ordered from us).2. individually only the box. Available models: VIS-T Single Street twin 2016-2018 Street twin 2019-2020 Street twin 2021-2024 EURO-5 / Speed twin 900 2023 Street scrambler 2016-2018 Street scrambler 2019-2020 Street scrambler 2021-2024 / Scrambler 900 2024 Bobber 2016-2020 Bobber 2017-2020 Bobber 2021-2024 EURO-5Bobber 2025 - Euro 5+ (B) VIS-T Dual T100 2016-2020 T100 2021-2024 EURO-5 T120 2016-2020 T120 2021-2024 EURO-5 T120 2025 - Euro 5+ (B) Thruxton 1200 Thruxton R EURO-4 Thruxton RS Speed Twin 1200 2019-2021 EURO-4 Speed Twin 1200 2021-2024 EURO 5 Street cup 2016-2018 *NOT SUPPORT LIST. All Speed master. Bobber TFC

From €495.00*

Details

Motogadget holding plate for Chrono Classic, Tiny & Speedster CB10737M / RS152

Fits for Triumph Bonneville, Scrambler & Thruxton. (Does not fit for Scrambler who are before BJ 2010. The holder is suitable for the big chrono and the little Tiny as well as the Speedster black

From €39.95*

Details

Motogadget Motoscope Tiny

Product information "Motogadget Motoscope Tiny"

Ask a question

Previously asked questions