To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Please choose your bike

Exhaust Wrap creme

Exhaust Wrap creme CB00022 / RS0

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much. 15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation. The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look!

€99.90*

Exhaust Wrap black

Exhaust Wrap black CB00023 / RS0

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the best, because there are some cheap products on the market that are flammable when they come into contact with gasoline. In addition to the anti-chome look, there is the pleasant side effect of directing more exhaust heat where it belongs, to the rear of the muffler. The radiated heat means the engine doesn't heat up as much. 15 meters long & 5 cm wide. That's enough for two manifolds. Two non-rusting clamps for fastening are included. The manifold does not need to be removed for installation. The exhaust tape may fade a little over time (i.e. due to heat, wetness, etc.). Especially with the cream-colored exhaust tape results in a really cool oldschool used look when it fades and then becomes schmutzg by using it and it has different shades. That's how it has to look! Classicbike-Raisch recommendation: Who would like to have the tape as long as possible black, we recommend a can of exhaust paint (see accessory article in this description) to order. With this you can spray the finished wrapped manifold then. This will keep the tape black much longer.

€98.90*

%

Stainles Steel Peasshooter Exhaust

Stainles Steel Peasshooter Exhaust CB00043.1M / RS0

Stainless steel rear silencer for Triumph Thruxton & Bonneville T100 with polished finish. Sound & Style of the '60s. All stainless steel. Handmade in Great Britan.The handmade Peasshooter stainless steel is in our opinion one of the most beautiful exhaust systems available on the market. Optically the perfect exhaust for every Cafe Racer! In addition, the exhaust is very well processed, a good fit has also sounded really cool to us!The exhaust is delivered in polished. Optionally we can also deliver the system in black ceramic coated. For this purpose order the additional article ceramic coating ESD for one pair (see accessories in this description).Performance-enhancing and also saves 3.3 kg compared to the originals. No ABE. Fits for carburetor and injector.Beautiful deep & bass sound!Bonneville Information: The exhaust has the same shape but is flatter like every Bonneville exhaust.

€599.00* €699.00* (14.31% saved)

Exhaust Wrap copper

Exhaust Wrap copper CB11515 / RS0

Exhaust tape Thermo Tec for the ultimate look. Qualitatively the only true, because there are some cheap products on the market that can burn when gasoline comes to it. In addition to the anti-chrome look, there is the pleasant side effect that simply more exhaust heat is directed to where it belongs: namely to the rear of the muffler. As a result, the engine is no longer so heated up by the radiated heat. In copper colors for a more eye-catching look. 15 meters long in 5 cm width. That's enough for two manifold. Two non-rusting clamps for mounting are included. The manifold does not need to be removed for installation. The exhaust tape will naturally fade a bit over time (due to heat, wetness, etc). This gives you a really cool used look over time.

€104.90*

Zard racing DB-Killer

Zard racing DB-Killer CB11523 / RS1

Raisch racing DB Killer for Zard short exhaust systems. More sound + more performance through more throughput. Approx. 40% larger hole. With our DB Killer there are now 3 sound variants available for the Zard systems. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.To be honest, with the original DB-killers you only get a very small sound compared to the standard version. Since most of them do not want to drive without DB-killers, we have made this more open variant. It looks like you have a legal DB-killer in it, but it sounds really good! With these db-killers the Zard systems get the sound they need.

€64.90*

Hot Rod Exhaust System - AC

Hot Rod Exhaust System - AC CB12648M / RS5

2-2 stainless steel complete system in side pipe - hot rod design, suitable for all air-cooled Triumph Modern Classic models. This exhaust system gives your Triumph a completely new look with E-number & road approval.The Hot Rod system is a complete system & has optional catalytic converters installed in both pipes. The manifold pipes are significantly thicker than the original ones and look much more massive. The exhaust system also has an indifferent pipe (connecting pipe between the two pipes, which is very important for performance and torque). The original catalytic converter is replaced. The elimination of the rear silencer saves a lot of weight. The sound of the hot rod exhaust system is top class and something special. It is really crisp / throaty and gives the twin engine a unique sound thanks to its slim muffler shape. The exhaust system is supplied with removable DB killers. So if the exhaust is not loud enough for you, you can simply remove them. The system has a nice rich, muffled sound. The hot rod system is of very high quality and is handmade in Italy. Available with or without KAT: You can order the exhaust system with or without catalytic converters. No catalytic converter is required for the carburetor models (but can still be ordered if you prefer the bike to be a little quieter).A catalytic converter must be officially installed on the injection models. However, if you are looking for more sound and more power, we recommend ordering the version without catalytic converter. Note on the product images:The images with a white background are sample images and may vary depending on the model. The air-cooled Triumph Modern Classic models, for example, do not have an indifferent pipe.

€1,250.00*

Shark Exhaust System 2-1

Shark Exhaust System 2-1 CB00048M / RS5

Complete stainless steel system suitable for Bonnie, Thruxton and Scrambler. With EG/ABE. From Shark, the exhaust is delivered with a lasered Shark logo (see photo), who does not want this, it can be polished out by us. For this please order the article "laser engraving polish out" under the accessory articles of this description in addition. Matching manifold gaskets to replace the exhaust, you will find under the accessories in this description. The sound is really great! Already with DB Killer really great. Even without DB Killer wonderful still to drive without causing a stir in the city at low gas. So should sound a legal plant. We are thrilled. Real extra power without and with shortened DB Killer. Great finish in polished stainless steel. We also offer an additional racing DB killer for the exhaust. This is virtually just an open pipe that is pushed into the end and screwed. The takes no sound away but there is something in the exhaust (see accessories). You can drive the EFI models of course without cat, but this would not be allowed! For optimal exhaust gas routing and power output, the manifolds are modified by us inside. In order to install the exhaust nicely on a Scrambler, we recommend the exhaust holder hole cover for Scrambler to order (see accessories) We can deliver the complete exhaust system also in black ceramic coated. For this, please order the additional option ceramic coating (see accessory article in this description).

€739.00*

Zard 2-1 Low Dual exhaust system

Zard 2-1 Low Dual exhaust system CB12888 / RS100

Zard dual exhaust system bottom mounted for Triumph Bonnie, Thruxton & Scrambler2-1 complete system with brushed stainless steel manifolds at the bottom.With EG-ABE. The stylish dual exhaust system from Zard gives your Triumph a new look. The 2-1 exhaust manifold guide frees up the entire left side of the machine and gives you a nice view of the swingarm and engine. Sound: The Zard Dual gives your Triumph a louder, richer 2-1 sound. 2-1 systems always sound a little more aggressive and sportier than the 2-2.The exhaust system has removable DB killers for those who want even more sound. Weight: The complete system brings a significant weight saving. Depending on the model, this is between 3 - 5 kg. Versions:The exhaust is optionally available for carburettors or EFI (injection engines), each with road approval.Or as a racing version without approval (perfect for those looking for performance and the loudest possible sound). For assembly: We recommend ordering an additional set of manifold gaskets (see accessories article in this description).

€1,195.00*

Zard Trombocino Exhaust System

Zard Trombocino Exhaust System CB00020M / RS100

Zard Tromboncino exhaust system for Triumph Bonnie, Thruxton & Scrambler.2-1 complete system with brushed stainless steel manifolds. With EG-ABE. An absolute POWER SYSTEM that really delivers. Super fit and finish. Fastenings without clamps via professional spring system. Tested JUDGEMENT: Very good! No other exhaust system gives the Twins as much noticeable more power as well as a more spontaneous response as the 2-1 Trombocini exhaust system! Optionally, the exhaust is also available with a completely black coating for an additional charge (if you are interested, please contact us). Zard uses a very small DB-killer for their exhaust systems, which lets relatively little through. If you are looking for a little more sound, we recommend our specially developed for the Zard systems Racing DB-killer. DIese are shorter and have a thicker passage. This provides more power and more sound.The Racing DB-Killer can be found under the accessories in this description.

€1,082.00*

Exhaust Paint Matt Black

Exhaust Paint Matt Black CB12181 / RS600

A can of high quality and heat resistant exhaust paint in matte black. Suitable for painting exhaust systems. Very interesting for all those who a high-quality ceramic coating too expensive. Of course, you can not compare such a paint with a ceramic coating, but you get a nice result for little money, if you have some painting skill. In addition, the varnish is suitable for spraying black heat protection bands, if they are to remain black longer.

€23.55*

Brass Exhaust Clamp Nuts

Brass Exhaust Clamp Nuts CB12018 / RS600

Magnum Force Forged Brass Exhaust Clamp Stud Nuts Set Of 4 - Hot Forged Individually out of solid Brass

€22.95*

Shark Racing DB-Killer

Shark Racing DB-Killer CB11526 / RS600

Raisch racing DB Killer SINGLE all Shark exhaust systems. More sound + more power through more throughput. With our DB Killer there are now 3 sound variants available for the exhaust systems. With original DB Killer, with Raisch DB Killer or completely without. Our DB Killers are without ABE. The DB Killers are delivered separately.With the original DB Killers you only get a very small sound compared to the standard killer. Since most of them don't want to drive without a DB-Killer, we have made this more open version. It looks like you have a legal DB-Killer in it, but it sounds really good! The killers almost have the sound of driving without but there's something in the exhaust.The DB killers are sold separately. 2 pieces are needed for a 2-2 exhaust system.

€15.00*

Zard Short 2-2

Zard Short 2-2 CB11399.1 / RS600

Model: Vergaser | Design: Without ABE

Zard Short complete system. Perfect for a conversion in which the rear is shortened and the rear should be as clean as possible. This gives you a really nice free view of the rims. The exhaust system is a complete system with manifolds. We supply manifold gaskets free of charge. The silencer have removable DB killer, which can be shortened if necessary, even if you want it a bit louder. Normally, the exhaust system is delivered in stainless steel (untreated) optics (looks very fancy). Optionally, the system can also be ordered in brushed, polished or black (for the items in the accessories of this description with order). For the black coating we use an external company (do not order it directly from Zard, because we are absolutely not convinced of their coating). Note on the Scrambler: To mount the exhaust system on a Scrambler, the original bracket of the side stand must be cut off.Note on the photos: The cropped photo and the one on the Bonneville T120 are for illustration purposes only (since the exhaust system on the T120 looks almost exactly the same).

€1,189.00*

Remus Racing DB-Killer

Remus Racing DB-Killer CB11019M / RS600

Raisch DB-Killer for Remus exhaust systems. More sound + more power through more throughput. Approx. 40% bigger hole. With our DB-Killer there are now three sound variants available for the Remus system. With original DB-Killer, with Raisch DB-Killer or completely without. Our DB-Killers are without ABE. They are delivered as a pairPlease choose in the selection whether you have a water or an air-cooled Triumph, as these have different DB killers. Since the original sea rings can break over the years, we also offer them as spare parts (see accessories in this description).

€74.90*

Remus Racing DB-Killer Bobber

Remus Racing DB-Killer Bobber CB11507M / RS600

Raisch DB Killer for Remus. More sound + more performance through more throughput. Approx. 40% larger hole and shorter tube. With our DB Killer there are now 3 sound variants available for the Remus system. With original DB Killer, with Raisch DB Killer or without. Our DB killers are without ABE. They are supplied in pairs.With the Racing DB Killers the exhaust makes a really good sound! With the original DB-killers the difference to the original exhaust is not really big, but you don't want to drive without it either. Therefore our perfect solution of the Racing DB-killers.The killers are available in silver & black (as you look at them very much, we recommend to use the black ones if a black exhaust is used).

€75.90*

Crusher protection

Crusher protection CB11007 / RS600

The SW-MOTECH motorcycle arch protection is designed as a supplement to the engine protection and secures the front manifold pipes against rockfall. At the same time, the robust stainless steel cover serves as heat protection. The universally applicable protector is available in two versions for tube diameters of 32-50 as well as 50-70 mm. By dividing into flexible segments, the covers can be easily adapted to the manifold shape. Depending on the number of pipes and the pipe diameter, the user can assemble the appropriate sheathing for almost every motorcycle model. particularities Protection against rockfall for the elbow pipes Heat protection for drivers and passers-by Universal fit for tube diameters of 32-50 mm Flexible segments allow simple adaptation to different pipe variants Ventilation openings for reliable ventilation Length: 30 cm Material: Stainless steel with brushed finish delivery Motorcycle anti-bend protection for pipe diameters of 32-50 mm Mounting material Installation instructions Note: The mounting kit is also available in a version for tube diameters of 50-70 mm Price is for one page.

€35.00*

Manifold rings

Manifold rings CB10946M / RS600

Finally, there are some! Stars rings for the elbow in retro style. In order to lend the Moppet the right classic old school look, there are now finally manifold rings as before. Sold as a pair. The rings are easy to separate in the middle and can then be attached (ie the elbows do not have to be dismantled for assembly). Do not fit for scrambler.

€88.95*

Original manifold black ceramic coating

Original manifold black ceramic coating CB10702 / RS600

Black MATT coating of your original manifold. You send us your original manifold and we send it back to you with a black ceramic coating. This takes approx. 3 - 6 weeks. ATTENTION !!! The price may vary, both upwards and downwards. Some manifolds now consist of significantly more than 2 parts and often also include accessory plates, so the total price will be higher. If you would like an exact price, you can send us pictures of the parts to be coated in advance and we will make you an offer.

€320.00*

Ceramic coating exhaust black

Ceramic coating exhaust black CB11964 / RS600

We can coat your original rear silencer in black. Many people would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original exhaust and we will coat it in matt black with a heat-resistant ceramic coating. The price is for two rear silencers. Without heat protection plates, brackets, mounting material etc. (these parts can also be coated, but will then be charged separately). Takes approx. 4 - 6 weeks.

€400.00*

Zard Spiezial 2-1 for Scrambler

Zard Spiezial 2-1 for Scrambler CB10670M / RS600

ZARD Special 2-1 top for Scrambler. Complete system with manifold. With EG-ABE. Over 7 KG weight saving to the series exhaust. Other colors that Zard also offers, you can also order from us on request. Optionally, there is the exhaust for an additional charge in completely black coated (but please contact us). Zard uses a very small DB-killer for their exhaust systems, which lets relatively little through. If you are looking for a little more sound, we recommend our specially developed for the Zard systems Racing DB-killer. DIese are shorter and have a thicker passage. This provides more power and more sound.The Racing DB-Killer can be found under the accessories in this description.

€1,659.00*

HBS 205 Bottle Exhaust

HBS 205 Bottle Exhaust CB00003M / RS600

Classic Silencer from England by Norman Hyde for Triumph Thruxton 900. The Norman Hyde systems have a very nice sound. Really nice muffled & bassy. For those who find the sound with the completely open exhaust system too loud, we also offer extra DB-killers, which we have developed for the Norman Hyde exhaust systems. The exhaust insert can be found under the accessories below this product description. The exhausts are nice and tight to the bike and are a good deal shorter than the original. Classic bottle design as it must be on an English motorcycle. The exhausts are made of steel chrome plated, which rounds off the classic look skillfully. With matching mapping or other carburetor jets, the exhaust provides more power. We recommend here our power kits or a reprogramming of the ECU (depending on whether you have a carburetor or injector model).

€789.00*

DB Killer for Norman Hyde Bottle

DB Killer for Norman Hyde Bottle CB00005 / RS600

D.B. for Norman Hyde Bottle exhaust systems (HBS.105 - 205 - 605 - 705). These DB Killer put the sound pressure in contrast to the originals strongly down, so that no neighbor is disturbed in the morning. A much deeper, nicer sound than the series system remains in any case. Is in a few seconds in and removed again. At the NH exhausts is a 4 hole in the factory (this must be drilled for our DB killer to 5mm to ensure a secure hold of the killer). Our special, for the Norman Hyde systems developed DB-killers have a screw welded at the end, who is the sound with the killers too leiste, which can still make this screw out for more sound.

€109.95*

Shark Slip on Bonneville T100

Shark Slip on Bonneville T100 CB00008M / RS600

Shark Slip on exhaust for Bonneville with spoke rims, for the original manifold system. Stainless steel with removable DB absorbers. We also offer a racing DB-Killer for the exhaust system (see accessories in this description). With EG/BE. Already with the legal DB absorbers an ingenious legal exhaust sound, as it could not be more beautiful. The exhaust is available with & without KAT. With the carburetor models no KAT is necessary, with the EFI models the exhaust with KAT must be taken if one wants to drive legally. Shark delivers the mufflers with a lasered Shark logo, if you don't like it, you can have it sanded out by us. To do this, please order the article "Shark Logo polishing" (accessories in this description).

€539.00*

Shark Flat Look Exhaust Thruxton

Shark Flat Look Exhaust Thruxton CB00010M / RS600

Shark Slip on Special Classicbike spare shock THRUXTON for original manifold system. By other intermediate piece Flat Look. not so steeply standing. We think it looks much nicer this way. The exhaust nestles better in the line of the Thrxton. Stainless steel with removable db absorbers. Much lighter, more delicate and of higher quality than the Triumph sports silencers, which are made of simple, slightly rusty sheet steel. Also available either loud or quiet. With EG/BE. Even with the legal db absorbers, an ingenious legal exhaust sound that could not be more beautiful. More power through modifications.We also offer a racing DB-Killer for the exhaust system (see accessories in this description).The exhaust is available with & without KAT. With the carburetor models no KAT is necessary, with the EFI models the exhaust with KAT must be taken if one wants to drive legally. Shark delivers the mufflers with a lasered Shark logo, if you don't like it, you can have it sanded out by us. To do this, please order the article "Shark Logo polishing" (accessories in this description).

€599.00*

Shark Slip On Thruxton

Shark Slip On Thruxton CB00011M / RS600

Shark Slip on exhaust system steep, for Thrxton 900 with original manifold system. Stainless steel with removable DB absorbers. We also offer a racing DB-killer for the exhaust system (see accessory article in this description). With EG/BE. Already with the legal DB absorbers a brilliant legal exhaust sound, as it can not be more beautiful. Shark delivers the mufflers with a lasered Shark logo, who does not like this, which can be grinded out by us. For this, the article Shark Logo auspolieren with order (accessory article in this description).

€539.00*

Auspuffschellen Edelstahl

Auspuffschellen Edelstahl CB00013 / RS600

Exhaust clamps stainless steel. BONNIE + THRUXTON. 2 pieces. A must if you drive stainless steel bags

€29.95*

%

Retro Racer Krümmer

Retro Racer Krümmer CB00014 / RS600

Cranker Retro Racer BONNIE. Swept Backpipes. Stainless steel Made in the UK A must if you want to perfect the retrolook. Fits the original bags and accessories

€199.00* €519.00* (61.66% saved)

Zard Roadster 2-1 oben

Zard Roadster 2-1 oben CB00015M / RS600

Zard exhaust system Roadster for Scrambler. 2-1 complete system made of brushed stainless steel. With EG-ABE. In the classic Trombocini shape. Great sound, perfect fit and a weight saving of 7,2kg compared to the original exhaust system. Optionally, the exhaust is also available in completely black coated for an additional charge (if you are interested, please contact us). Zard uses a very small DB-killer for their exhaust systems, which lets relatively little through. If you are looking for a little more sound, we recommend our specially developed for the Zard systems Racing DB-killer. DIese are shorter and have a thicker passage. This provides more power and more sound.The Racing DB-Killer can be found under the accessories in this description. Attention Bonneville & Thruxton: This exhaust is plug & play for the Scrambler. To mount it on a Bonneville or Thruxton, slight modifications must be made to the bike. If you are interested in this, please feel free to contact us.

€1,263.00*

Zard Racing Cross 2-1

Zard Racing Cross 2-1 CB00017 / RS600

Zard Exhaust System Racing Cross for Scrambler, BONNIE, THRUXTON. 2-1 Complete system brushed stainless steel. Without EC-ABE.

€1,055.00*

Krümmerdichtung AC

Krümmerdichtung AC CB00021 / RS600

Exhaust gasket for sealing between elbow and cylinder head outlet. Whoever had the bend from the bend needs this seal which is squashed when it is put on and therefore can only be used once. Couple wise.

€10.90*

%

HBS 265 Peashooter

HBS 265 Peashooter CB00025M / RS600

Rear silencer Peashooter for Thruxton -Handmade in GB High quality chrome plated. No ABE. Loud pipes save life. Wonderful deep sound that just sounds good. No riot bags

€529.00* €719.95* (26.52% saved)

Remus Edlstahl Auspuff Speedmaster / America

Remus Edlstahl Auspuff Speedmaster / America CB00030 / RS600

Remus stainless steel exhaust for Triumph Speedmaster & America. With catalytic converter and EC type approval - street legal. Quality:The Remus stainless steel exhaust system is probably the highest quality system you can buy for your Speedmaster / America. It is also one of the last systems that can still be bought with approval.The exhausts are made of stainless steel and then classically chrome-plated. This ensures the classic look and a very high surface durability. Great fit. Awesome sound. Our absolute recommendation for these two models.Sound: When it comes to sound, the Remus system is in a class of its own. It has a nice muffled and throaty sound. The bassy sound is exactly what every Twin driver longs for. The exhaust system is supplied with removable DB-killer. If the sound/volume of the standard system is not enough for you, you can order our optional Racing DB-killer (see accessories in this description) to go with it, or you can ride without a killer at all.

€1,550.00*

Hauptständer Anschlag

Hauptständer Anschlag CB00034 / RS600

Hauptständer Anschlag für Zubehör Auspuffanlagen.

€19.95*

%

HBS 405

HBS 405 CB00035 / RS600

Norman Hyde Classic Silencer. SuperSound for Scrambler: But quiet enough for the city. Much lighter than the original and shorter and therefore more beautiful. Without TUV. More power with re-atomizing or use of the Power Commander with the EFI models. Fits carburettor and injectors.

€499.00* €614.49* (18.79% saved)

Shot Gun

Shot Gun CB00036 / RS600

Scrambler Shotgun rear silencer PAAR: Absolutely powerful sound and cool look for a small price. Is not as loud as it looks, because the inner workings of the two mini mufflers were extensively modified and damped by us. So with little gas still absolutely drivable in the city. When pulling on the gas, then the heartwarming Blubber sound of the 270 degree parallel twin really comes into its own. Are hardly louder than the original accessory mufflers from Triumph but without the imprint: "Not for Road use". Brings a huge weight savings and is changed in 2 minutes. Harmonizes with the carburetors and the EFI models. The Shot Guns are made of stainless steel. Who would like to have the Shot Guns geren in black, we recommend the exhaust paint from our program to order. So you can make the exhausts quite easy black.

€149.95*

HBS 565

HBS 565 CB00038 / RS600

Here is the Peashooter type for BONNIE SE. Same good features as the Classic Silencer. Without TUV. Loud pipes save life.

€789.00*

Shark Exhaust Bonneville SE

Shark Exhaust Bonneville SE CB00041 / RS600

Colour: Polished

Shark Slip on exhaust for Bonnveille SE (with cast wheels) for the original manifold system. Stainless steel with removable DB absorbers. We also offer a racing DB-Killer for the exhaust system (see accessories in this description). With EG/BE. Already with the legal DB absorbers an ingenious legal exhaust sound, as it could not be more beautiful. The exhaust is available with & without KAT. With the carburetor models no KAT is necessary, with the EFI models the exhaust with KAT must be taken if one wants to drive legally. Shark delivers the mufflers with a lasered Shark logo, if you don't like it, you can have it sanded out by us. To do this, please order the article "Shark Logo polishing" (accessories in this description).

€769.00*

%

Zard Flat

Zard Flat CB00050M / RS600

New exhaust for scramblers from ZARD in flat look. Extremely light like everything from Zard. The supply situation will be tight and scarce. Pre-orders will be gladly accepted. Crisp sound, as it should be. All systems with EG/ABE. Carburettor models work. Two new manifold gaskets are included in the scope of delivery. Optionally, the exhaust is also available in completely black coating for an additional charge (but please contact us for this). Other colours offered by Zard can also be ordered from us on request. Zard uses a very small DB-killer for their exhaust systems, which lets relatively little through. If you are looking for a little more sound, we recommend our specially developed for the Zard systems Racing DB-killer. DIese are shorter and have a thicker passage. This provides more power and more sound.The Racing DB-Killer can be found under the accessories in this description.

€1,150.00* €1,499.00* (23.28% saved)

Exhaust carrier cover Scrambler

Exhaust carrier cover Scrambler CB00052M / RS600

Muffler hole cover Scrambler. Who builds an accessory exhaust such as Zard or Shark 2-1 down to its scrambler remains an ugly hole at the original exhaust holder. For this we have milled a beautiful milled part made of aluminum. Comes complete with stainless steel screw, nut and washer. FIT OPTIC ALSO VERY GOOD TO THE ORIGINAL SCRAMBLER EXHAUST

€9.90*

HBS 105 Bottle Exhaust

HBS 105 Bottle Exhaust CB00002 / RS600

Colour: Chrome

Classic Silencer from England by Norman Hyde for Triumph Bonneville T100. The Norman Hyde systems have a very nice sound. Really nice muffled & bassy. For those who find the sound with the completely open exhaust system too loud, we also offer extra DB-killers, which we have developed for the Norman Hyde exhaust systems. The exhaust insert can be found under the accessories below this product description. The exhausts are nice and close to the bike and are a good deal shorter than the original. Classic bottle design as it must be on an English motorcycle. The exhausts are made of steel chrome plated, which rounds off the classic look skillfully. With matching mapping or other carburetor jets, the exhaust provides more power. We recommend here our power kits or a reprogramming of the ECU (depending on whether you have a carburetor or injector model). If you want to have the exhaust system in black, you can order it from us on request & for an additional charge.

€789.00*

HBS 165

HBS 165 CB00024.1M / RS600

Rear silencer Peashooter for BONNIE - Handmade in GB High quality chrome plated. No ABE. Loud pipes save life. Wonderful deep sound that just sounds good. No riot bags

€499.00*

Shark Exhaust with Classic Caps

Shark Exhaust with Classic Caps CB00029M / RS600

Shark exhaust with CLASSIC end cap. Finally a set conform exhaust in OLDSTYLE look. Fits for Bonnie and for Thruxton and looks great on both bikes. We modify the exhaust bags with high quality turned stainless steel caps in this form. Very accurately fitting, absorbent and guaranteed rattle-free. The well known beautiful deep bass sound of the Shark stainless steel exhaust system is naturally preserved. The E-number for the ABE remains visible and therefore everything is legal. Please indicate the motorcycle type when ordering.The exhaust is available with & without KAT. With the carburetor models no KAT is necessary, with the EFI models the exhaust with KAT must be taken if one wants to drive legally.Shark delivers the mufflers with a lasered Shark logo, if you don't like it, you can have it sanded out by us. To do this, please order the article "Shark Logo polishing" (accessories in this description).

€699.00*

Stainless steel cleaner

Stainless steel cleaner CB12740 / RS601

Probably the best and most effective cleaner for stainless steel surfaces (e.g. exhaust manifolds & rear silencers). This cleaner really works wonders! We tested it ourselves in our workshop and could hardly believe how well and quickly the cleaner works (ideal for making manifolds and exhausts look like new again).After a few years, every beautiful stainless steel manifold that was once matt silver or polished no longer looks silver, but yellow.Simply spray such a manifold with the cleaner, wait 2-3 minutes and rinse with water. As if by magic, the manifold will look almost like new again, without grinding / rubbing or similar. Tip:For safety reasons, we recommend covering other parts of the motorcycle or removing the part to be cleaned.

€17.95*

Exhaust systems and accessories for your air-cooled Triumph Modern Classic motorbike up to model year 2015 for optimum performance

Whether you want to upgrade your air-cooled Triumph Modern Classic machine with a new exhaust system or plan individual customisations with special exhaust accessories - at Classicbike Raisch you will find the perfect solution for your bike. High-quality materials, a perfect fit and an impressive sound make the exhaust solutions for our Bonneville, Thruxton and Scrambler models as carburettor or injection (EFI) the first choice. This not only improves the performance of your motorbike, but also gives it a unique look and sound that can be heard and seen! Here you will find various exhaust systems that are not only optimised for our models, but also comply with strict emission standards. They offer a perfect combination of performance, sound and style, making your motorbike even more attractive.