HeckWeck Kit - Bonneville models

Classicbike-Raisch

€199.00*

Prices incl. VAT plus shipping costs

Model

Zubehörartikel

Cool Seat LC ribbed.

from €415.00*

Rizoma LEGGERA indicators

from €80.00*

Kellermann Atto indicator

from €59.95*

Kellermann Bullet Turn Signals

from €109.95*

Kellermann Micro

from €69.95*

Rizoma IRIDE indicators

from €72.00*

Rizoma CLUB indicators

from €82.00*

Motogadget Mo.Blaze Tens 1 & 4 Indicator

from €59.00*

item number:	211257474
Shop-number:	CB11198

Product information "HeckWeck Kit - Bonneville models"

Rear conversion kit / short rear for Triumph Bonneville T100 / T120.
Made in Germany

Our HeckWeck kit gives your bike a really sporty & tidy rear end. The large original mudguard disappears and the rear is significantly shorter (looks particularly cool with short, narrow seat benches such as the Cool Seat or the Tamarit SIlverstone Seat).
The kit is probably the most minimalist and cleanest Plug&Play rear end you can buy.

Attention: If you have a StreetTwin or other flat seat on your Bonneville (e.g. our Cool Seat, the Tamarit Silverstone Seat or the flat Triumph accessory seat), you should choose the kit for the StreetTwin.

The kit consists of: A lower shell (serves as a splash guard in the rear & as a holder for electronic components under the seat), an aluminium number plate holder (both black powder coated), an LED number plate light (with E-number, holes on the number plate holder are already present), all cables, plugs & screws required for installation (a plug that fits into the original wiring harness is included), as well as very detailed step-by-step installation instructions.

As the HeckWeck kit does NOT include a central tail light, it is essential to have 3in1 indicators (these combine indicator, tail & brake light in one indicator).
Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.
All indicators listed here have an E number and are road legal.

With the kit in combination with the 3-1 indicators, the rear is completely clear and the licence plate is perfectly flush with the seat (no central rear light is required).

If you don't feel like wiring, crimping and soldering the enclosed cables and plugs, you can also order this service (accessory item HeckWeck Kit / LC under the 3-1 indicators).
In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness. Even inexperienced screwdrivers can carry out the conversion without any problems (as the installation instructions are very detailed).
Resistors are not necessary as the flashing frequency can be set via the menu.

Suitable indicators for the front can be found further down in the accessories section of this description.

Indicator holder
These must be ordered separately (below the description)

Indicator holder Vario: The turn signals are mounted directly on the licence plate. Brackets are then attached to the licence plate holder. (Stvo compliant).

Indicator holder strut inside: The indicators are mounted on the inside of the suspension strut with a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant as the indicators are too far to the rear.

If you want to have it 100% correct for TÜV & police, you can order an additional reflector (accessory item HeckWeck Kit / LC under the 3-1 indicators).

We also recommend ordering our licence plate screw set for a nice mounting (accessory article HeckWeck Kit / LC under the 3-1 indicators).

Triumph LC models from 2016:	Bonneville T100 Bonneville T120 Street Cup Street Scrambler Street Twin

Downloads "HeckWeck Kit - Bonneville models"

Download DE-EN-Montageanleitung-Heck-Weck-Kit-V-1-2-mit-Motone-Kabelsatz

Triumph LC ab 2016	Bonneville T100 EU 4 Bonneville T100 EU 5 Bonneville T100 EU 5 + Bonneville T120 EU 4 Bonneville T120 EU 5 Bonneville T120 EU 5 +

-1

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Choose from the following articles in the article group: Blinker Halter - HeckWeck LC / Indicator brackets optional

0 / 99 chosen

Turn signal holder - Vario

Available, delivery time: 1-3 days

€17.95*

Turn signal holder shock inside

Design: 8er

Available, delivery time: 1-3 days

€16.90*

Choose from the following articles in the article group: Blinker/Rücklicht Kombinationen - Indicator/Rear Light Combinaions optional

0 / 1 chosen

Pico LED 3-1 tail light / indicator combination

Available, delivery time: 1-3 days

€143.96*

% €159.95* (10% saved)

2x Motogadget Mo.Blaze Tens 3 Indicator/Rearlight

Colour: Black

Available, delivery time: 1-3 days

€89.10*

% €99.00* (10% saved)

2x Rizoma IRIDE taillight / turn signal

Colour: Black

Available, delivery time: 1-3 days

€94.50*

% €105.00* (10% saved)

Rizoma LEGGERA S rear light/indicator

Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)

Rizoma CLUB S rear light/indicator

Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)

2x Kellermann Atto Indicators

Available, delivery time: 1-3 days

€89.96*

% €99.95* (9.99% saved)

2x Kellermann Bullet tail light/indicator combination

Colour: Black

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)

Choose from the following articles in the article group: Zubehör Artikel HeckWeck Kit / LC optional

0 / 99 chosen

Reflector

Available, delivery time: 1-3 days

€10.90*

License plate screw set

Available, delivery time: 1-3 days

€8.90*

Wiring system HeckWeck & Eli Kit

Available, delivery time: 1-3 days

€34.95*

Design

Total bundle price for current configuration

€199.00 ... *

Prices incl. VAT plus shipping costs

Zubehörartikel

Cool Seat LC ribbed. CB11209M / RS-1

Finally, there is the Coolseat of the AC models also for the new water cooled. Really nice and short. Gives the motorcycle a completely different line, as it has a much slimmer effect and the frame ridges become visible. The seat looks not only wonderful, but is also comfortable! Real leather seat in rustic look with quilted rib pattern. The seat benches are very very well processed (handmade) and above all the genuine leather in vintage look is what makes it! A real eyecatcher. The black is a black with light antracite stitch which is simply because it is genuine leather (if you want to have it really black, you have to grease it with black leather cream). Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tank pad you will find under the accessories articles in this description.

From €415.00*

Details

Rizoma LEGGERA indicators CB11274.2M / RS0

Rizoma "LEGGERA" mini indicators made of billet aluminium in top quality. Minimalist indicators for anyone who wants them to be as inconspicuous as possible, but does not want to compromise on safety and an elegant finish. The indicators shine very brightly thanks to modern LED technology. The indicators have an E number. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with white position light (only for the front!) or without. Silver indicators: sold individuallyBlack indicators: sold as a pair Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessories in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €80.00*

Details

Kellermann Atto indicator CB11500M / RS2

Kellermann Atto indicator in Clear & Dark version Kellermann Atto, the smallest indicator available on the market! And with an E number (i.e. legal for front & rear)! Perfect for anyone who simply wants the indicators to be as inconspicuous as possible on the motorbike.Especially in combination with the Atto rear light, you can achieve an incredibly clean look at the rear. (You can find the rear light under accessories in this description). In the second picture we have installed the Atto indicator on the handlebar fitting. This works with all Triumph models that have a 1 inch fitting with a hole for mirror mounting. To do this, the motorbike must be converted to handlebar end mirrors (if not already fitted ex works, e.g. the Bobber), an indicator extension must be ordered and a black washer must be fitted on top (you can get this from us). An indicator has never been smaller. For comparison: the light surface of the Atto®/Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorbike. With the Atto®/Atto® Dark, the "indicator" component on the motorbike can virtually disappear visually. This indicator is only noticeable when it really needs to be.When it does flash, it shines with an intensity that has made Kellermann products legendary and the company a trendsetter time and time again. The Atto®/Atto® Dark offers maximum luminosity with minimum size, in short: it is "sensationally small - spectacularly bright". We recommend not looking directly into the light of this small power station for too long!Optimised light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology**, the new Extranz - Extreme Optical Transparency Technology is used here for the first time, which makes this combination possible. As the Atto indicators only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, a suitable adapter is available for this (see accessories article in this description) The price is for one indicator Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €59.95*

Details

Kellermann Bullet Turn Signals CB10574M / RS2

Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece. Suitable flasher for connection to the original wiring harness.

From €109.95*

Details

Kellermann Micro CB11162M / RS600

Kellermann micro LED indicators in black. As usual from Kellermann in the highest quality. The indicators are available as simple indicators and as an indicator/rear light combination. In the indicator/rear light combination, the rear light, indicator and brake light are integrated into the indicator. Both versions naturally have an E number. The price is for one indicator. Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €69.95*

Details

Rizoma IRIDE indicators CB11270M / RS0

Beautiful, classic indicators made of billet aluminium from Rizoma in the very highest top quality. The indicators shine very brightly thanks to modern LED technology. The indicators are E-marked. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. The indicators are sold individually (except for black without position light, which come as a pair) Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €72.00*

Details

Rizoma CLUB indicators CB11272M / RS0

Rizoma "CLUB" mini indicators made of billet aluminium in the very highest top quality. That's what we Modern Classic fans want! Modern small indicators in a classic round design.The indicators shine very brightly thanks to modern LED technology and are therefore very easy to see despite their small size. The indicators have an E number and are therefore road legal. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. A resistor is included in the scope of delivery. Chrome indicators are sold individually Schwarez indicators are sold as Pairs Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturer with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €82.00*

Details

Motogadget Mo.Blaze Tens 1 & 4 Indicator CB12070.2M / RS0

The new Motogadget mo.blaze tens1 & 4 are currently the smallest road legal turn signals in the world. Due to the cleverly chosen design, the turn signals look chic and like a real turn signal despite their tiny size. Thus, they look really good on almost every motorcycle or, depending on their position, they stand out as good as not at all.Particularly advantageous with these turn signals is that they have an M8 thread despite their small size, which makes it possible to mount the turn signal on just about any bracket, adapter & tail from our range. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED® Technology and definitely no longer to be overlooked. At the same time, the additional lateral beam angle ensures the best visibility and safety. The mounted turn signal has ECE approval as a front and rear direction blinker. The aluminum housing is CNC milled and available in black anodized or mirror polished finish. In addition, the turn signal is optionally available as a normal turn signal and as a version with position light. The turn signals with position light are ONLY suitable for the front. These shine permanently white and ensure that you are better seen when driving behind. The price is for ONE turn signal and these are sold individually. So please order 2 if a pair is needed. Specifications: Total length with thread 29 mm Leangth without thread 11 mm Largest diameter 11 mm Wire leangth ca. 110 cm Weigth with wire ca. 20 g Mounting M8 Gewindebolzen Power consumption ca. 1 Watt

From €59.00*

Details