€0.00*

HeckWeck Kit - Speed Twin 1200

€199.00*

Prices incl. VAT plus shipping costs

product-image
Zubehörartikel
from €72.00*
from €82.00*
from €109.95*
from €69.95*
from €80.00*
from €59.95*
item number: 211257388.R
Shop-number: CB11745

Product information "HeckWeck Kit - Speed Twin 1200"

Short tail for Triumph Speed Twin 1200

With this rear end, the Speed Twin looks much sportier and lives up to its name. The rear is made a little shorter by removing the mudguard. This makes the rear end look really crisp!

Indicator brackets: These must be ordered separately. You will find two different indicator holders below the description.

Vario indicator holder:
The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).
This version is legal & StvO compliant.
Indicator holder strut:
The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear).

The kit consists of: An aluminium lower shell (serves as a splash guard in the rear & as a holder for electronic components under the seat), an aluminium number plate holder (both black powder-coated), an LED number plate light (with E-number, holes on the number plate holder are already present), all cables, plugs & screws required for installation (a plug that fits into the original wiring harness is included), as well as very detailed step-by-step installation instructions.

As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).
Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.
All indicators listed here have an E number and are road legal.

With the kit in combination with the 3-1 indicators, the rear is completely clear and the licence plate is perfectly flush with the seat (no central rear light is required).

If you don't feel like wiring, crimping and soldering the enclosed cables and plugs, you can also order this service (accessory item HeckWeck Kit / LC under the 3-1 indicators).
In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness. Even inexperienced screwdrivers can carry out the conversion without any problems (as the installation instructions are very detailed).
Resistors are not necessary as the flashing frequency can be set via the menu.

You will find suitable indicators for the front below this description.

If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LCunder the 3-1indicators).

We also recommend ordering our licence plate screw set for a nice installation (accessory article HeckWeck Kit / LC under the 3-1 indicators).

Triumph LC models from 2016:
  • Speed Twin - 1200
Triumph LC ab 2016
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
-2
-2
-2
-2

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Choose from the following articles in the article group: Blinker Halter - HeckWeck LC / Indicator brackets optional
0 / 99 chosen
Turn signal holder - Vario
Turn signal holder - Vario

Available, delivery time: 1-3 days

€17.95*

Turn signal holder shock inside
Turn signal holder shock inside
Design: 8er

Available, delivery time: 1-3 days

€16.90*

Choose from the following articles in the article group: Blinker/Rücklicht Kombinationen - Indicator/Rear Light Combinaions optional
0 / 1 chosen
Pico LED 3-1 tail light / indicator combination
Pico LED 3-1 tail light / indicator combination

Available, delivery time: 1-3 days

€143.96*

% €159.95* (10% saved)
Motogadget Mo.Blaze Tens 3 Indicator/Rearlight
2x Motogadget Mo.Blaze Tens 3 Indicator/Rearlight
Colour: Black

Available, delivery time: 1-3 days

€89.10*

% €99.00* (10% saved)
Rizoma IRIDE taillight / turn signal
2x Rizoma IRIDE taillight / turn signal
Colour: Black

Available, delivery time: 1-3 days

€94.50*

% €105.00* (10% saved)
Rizoma LEGGERA S rear light/indicator
Rizoma LEGGERA S rear light/indicator
Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)
Rizoma CLUB S rear light/indicator
Rizoma CLUB S rear light/indicator
Colour: Black

Available, delivery time: 1-3 days

€170.10*

% €189.00* (10% saved)
Kellermann Atto Indicators
2x Kellermann Atto Indicators

Available, delivery time: 1-3 days

€89.96*

% €99.95* (9.99% saved)
Kellermann Bullet tail light/indicator combination
2x Kellermann Bullet tail light/indicator combination
Colour: Black

Available, delivery time: 1-3 days

€98.96*

% €109.95* (10% saved)
Choose from the following articles in the article group: Zubehör Artikel HeckWeck Kit / LC optional
0 / 99 chosen
Reflector
Reflector

Available, delivery time: 1-3 days

€10.90*

License plate screw set
License plate screw set

Available, delivery time: 1-3 days

€8.90*

Wiring system HeckWeck & Eli Kit
Wiring system HeckWeck & Eli Kit

Available, delivery time: 1-3 days

€34.95*

Total bundle price for current configuration

€199.00 ... *

Prices incl. VAT plus shipping costs

Skip product gallery

Zubehörartikel

Rizoma IRIDE indicators
Rizoma IRIDE indicators CB11270M / RS0
Beautiful, classic indicators made of billet aluminium from Rizoma in the very highest top quality. The indicators shine very brightly thanks to modern LED technology. The indicators are E-marked. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. The indicators are sold individually (except for black without position light, which come as a pair) Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €72.00*
Details
Rizoma CLUB indicators
Rizoma CLUB indicators CB11272M / RS0
Rizoma "CLUB" mini indicators made of billet aluminium in the very highest top quality. That's what we Modern Classic fans want! Modern small indicators in a classic round design.The indicators shine very brightly thanks to modern LED technology and are therefore very easy to see despite their small size. The indicators have an E number and are therefore road legal. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with a white position light (only for the front!) or without. A resistor is included in the scope of delivery. Chrome indicators are sold individually Schwarez indicators are sold as Pairs Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturer with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you will find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €82.00*
Details
Kellermann Bullet Turn Signals
Kellermann Bullet Turn Signals CB10574M / RS2
Kellermann Bullet 1000 is milled from the solid. Aluminum in noble form and finish, uncompromising quality. The classic cartridge shape was reinterpreted and exactly in the right size, not too small, not too big. Glass diameter: 36.5mm, depth 50mm. Flowing forms and perfect transitions. The view remains on this blinker and glides along at the same time. The prices are per piece. Suitable flasher for connection to the original wiring harness.

From €109.95*
Details
Kellermann Micro
Kellermann Micro CB11162M / RS600
Kellermann micro LED indicators in black. As usual from Kellermann in the highest quality. The indicators are available as simple indicators and as an indicator/rear light combination. In the indicator/rear light combination, the rear light, indicator and brake light are integrated into the indicator. Both versions naturally have an E number. The price is for one indicator. Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €69.95*
Details
Rizoma LEGGERA indicators
Rizoma LEGGERA indicators CB11274.2M / RS0
Rizoma "LEGGERA" mini indicators made of billet aluminium in top quality. Minimalist indicators for anyone who wants them to be as inconspicuous as possible, but does not want to compromise on safety and an elegant finish. The indicators shine very brightly thanks to modern LED technology. The indicators have an E number. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with white position light (only for the front!) or without. Silver indicators: sold individuallyBlack indicators: sold as a pair Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessories in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €80.00*
Details
Kellermann Atto indicator
Kellermann Atto indicator CB11500M / RS2
Kellermann Atto indicator in Clear & Dark version Kellermann Atto, the smallest indicator available on the market! And with an E number (i.e. legal for front & rear)! Perfect for anyone who simply wants the indicators to be as inconspicuous as possible on the motorbike.Especially in combination with the Atto rear light, you can achieve an incredibly clean look at the rear. (You can find the rear light under accessories in this description). In the second picture we have installed the Atto indicator on the handlebar fitting. This works with all Triumph models that have a 1 inch fitting with a hole for mirror mounting. To do this, the motorbike must be converted to handlebar end mirrors (if not already fitted ex works, e.g. the Bobber), an indicator extension must be ordered and a black washer must be fitted on top (you can get this from us). An indicator has never been smaller. For comparison: the light surface of the Atto®/Atto® Dark fits four times on a 1 cent coin! This consistent reduction opens up completely new design options on the motorbike. With the Atto®/Atto® Dark, the "indicator" component on the motorbike can virtually disappear visually. This indicator is only noticeable when it really needs to be.When it does flash, it shines with an intensity that has made Kellermann products legendary and the company a trendsetter time and time again. The Atto®/Atto® Dark offers maximum luminosity with minimum size, in short: it is "sensationally small - spectacularly bright". We recommend not looking directly into the light of this small power station for too long!Optimised light control is achieved by a sophisticated system of lenses and reflectors. In addition to the well-known Kellermann HighPower LED technology**, the new Extranz - Extreme Optical Transparency Technology is used here for the first time, which makes this combination possible. As the Atto indicators only have an M5 thread and almost all holders and indicator mounts are designed for M8 threads, a suitable adapter is available for this (see accessories article in this description) The price is for one indicator Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessory items in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

From €59.95*
Details
Current selection:

Prices incl. VAT plus shipping costs

Total bundle price for current configuration

€199.00 ... *

Prices incl. VAT plus shipping costs