€0.00*

Licensplate Holder site ways CNC

Skip image gallery

€349.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
€34.90*
€7.90*
from €698.00*
€289.95*
item number: 104836-A97-F15
Shop-number: CB11182M

Product information "Licensplate Holder site ways CNC"

This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender.

The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900

The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description).

Details at a glance
+ Laterally mountable license plate holder
+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30
+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium
+ Design: WUNDERKIND-Custom

The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.
For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).
ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust.

The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.

Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Speedmaster
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5 - Street Scrambler / Scrambler 900
Scrambler 900 / Street Scrambler EU5 +
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5 - Street Twin / Speed Twin 900
Speed Twin 900 / Street Twin EU5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
2
2
2
2

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel
Mounting Kit stock tail light CB11183 / RS600
All material you need to in install the original rear light without the licens plate holder.

€34.90*
Reflector
Reflector CB11448 / RS600
Reflector with holder. Ugly but mandatory. Only for the TUEV demonstration.

€7.90*
Short Rear Fender Kit Bobber
Short Rear Fender Kit Bobber CB11411M / RS0
A short fender for the Bobber, which replaces the original, quite long, as well as the huge traffic lights can be omitted. The fender is unpainted, can be painted as desired or simply installed as is, the metal look fits very well to the Bobber (but must then be painted with clear lacquer and powder coated mandatory, otherwise the steel will rust). A matching front fender in the same design is also available (see accessories in this description). The kit was developed as customer-friendly as possible, i.e. all original brackets were taken over, so that the kit can be mounted plug&play without much tinkering. Included are the two milled support braces with integrated tail light / turn signal combination (with E-number). The cables of the turn signals run inside the struts, so that they can be routed as invisible as possible. We recommend to the kit the side license plate holder from our range (see accessories in this description). For easier installation / wiring, we recommend the matching Raisch cable set to order. You can find it under the accessories in this description.Attention on models from model year 2023: According to the installation instructions from Wunderkind, a blocking diode must be installed in the rear lights on these models (included in the scope of delivery). If you order our cable set in addition, you can save yourself this work, as a diode is already installed in the cable set. The fender is available in 3 variants. Variant 1: Raw untreated steel Variant 2: Black satin powder coated (similar surface as most motorcycle frames) Variant 3: Black high gloss powder coated. This coating comes, by the extremely high-quality powder is used, a black glossy paint really very close (see photos)! However, you should not expect a 110% perfect surface as from a painter who primed and sanded the fender beforehand. Since the fender is handmade stainless steel, it has texture and slight imperfections (which you can easily see even after powdercoating). If you want it perfect or in a different color, you will need to have the fender primed and then painted. However, we would then still recommend to have the fender powder-coated in advance, as this serves as a perfect rust protection (but then variant 2 black matt is sufficient). 

From €698.00*
Details
Razor Bobber Hinterrad Kotflügel - Short
Razor Bobber Hinterrad Kotflügel - Short CB12421 / RS3
The Razor short steel fender is the shortest rear fender available for the Triumph Bobber models. The fender comes ready painted in gloss black. The fender is suitable for all Bobber models. The perfect fender for anyone who would prefer to ride without a fender at all, but because of the splash protection does not want to do without it. The Razor is just long enough to protect the airbox / electronics box of the motorcycle, but visually protrudes only minimally above the swingarm. Classicbike-Raisch recommends when converting to the short fender, 3-1 taillight / turn signal to install as well as a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description. The fender is supplied plug & play with all mounts (also for the chain guard) for the original mounts.

€289.95*