€0.00*

Lamp grille Alcatraz - Clip on

Skip image gallery

€119.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €159.95*
item number: CBR-LC-3D-125
Shop-number: CB12651

Product information "Lamp grille Alcatraz - Clip on"

Alcatraz clip-on lamp grille - attached to and removed from the headlight with a single click/handle.

The practical thing about the clip-on lamp grille is that it can be fitted within a second. The grille is simply clipped over the original headlight ring and then holds firmly in place. If you want to remove it, simply pull it off with a little force. This is also particularly practical when cleaning the motorbike, because you can simply remove the grille to clean the headlight lens.
The struts of the Alcatraz grille have the same lines as the LED unit of the Triumph headlight and the Triumph bulb in the centre (see pictures).
However, the grille also fits and looks good on the halogen headlights of the first Bobber series.

Visually, the grille enhances the original headlight of your Bobber and skilfully creates a highlight on the motorbike.

The clip-on Alcatraz lamp grilles.
They are manufactured from high-quality, carbon fibre-reinforced plastic using a state-of-the-art 3D printing process. The surface is then smoothed and the grilles are painted in a black satin finish.
This results in a very attractive and high-quality surface.

Triumph LC models from 2016:
  • Bonneville T100
  • Bonneville T120
  • Scrambler 1200 XC
  • Scrambler 1200 XE
  • Speed Twin - 1200
  • Street Cup
  • Street Scrambler
  • Street Twin
  • Thruxton 1200
  • Thruxton 1200 R
Downloads "Lamp grille Alcatraz - Clip on"
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 16" / Bobber Black Euro 5 + / BJ 2026 -
Bobber 19"
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
-1
-1
-1
-1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Lowering speedo & headlights Bonneville
Lowering speedo & headlights Bonneville CB12220M / RS-5
This lamp holder kit offsets the original headlight and the speedometer of your Bonneville T120 & T100. Whenever you look at a Bonneville or see photos, you think yup a really chic classic, but something just does not fit 100%. Something is not right in the front part! The headlight and the speedometer sit just too high, which does not fit perfectly in the line of the bike.So we have developed a kit, with which the headlight and the speedometer is set about 3cm lower. Also, the headlight comes 2cm closer to the motorcycle.Due to the deeper seated speedometer, this nestles much better to the triple clamp even in the top view. So it looks like he would fit perfectly to the triple clamp and no longer as if he was just somehow screwed to it (see pictures).Also, a nice side effect is that the regulator has to be moved from in front of the triple clamp behind the water cooler. If you are worried that it might get too hot there, you are wrong. Triumph installs the same regulator on other models from the factory also behind the radiator. The lamp holders have an 8 hole, for mounting turn signals. Pretty much all accessory turn signals on the market have an M8 thread and thus fit into the hole (who wants to continue to use the original turn signals, you have to drill yourself a second hole). We recommend to the kit the Motogadget Tens or Pin turn signals, which simply fit best to the holders (see accessory article in this description).If you do not want to mount turn signals on the brackets, we recommend ordering a pair of turn signal plugs (see accessory items in this description). The kit consists of: Stainless Steel Heeadlight Holders Speedo lowering Regulator relocation Rarely have we had a part in our range that brings such a positive change to the bike with so little effort. Since pictures say more than a thousand words, just look at the pictures! IMPORTANT! click on the pictures and look at them in large, because then they are moving pictures that show the change from original to lowering. The kit is available in either Black (lamp holders are black powder coated) or Raw (the stainless steel lamp holders are hand brushed). All cables are long enough for mounting the regulator routing. All cables are long enough for mounting the controller routing. However, under certain circumstances, a piece of the wiring harness must be stripped in the steering head area, so that you have more cable length available. To insulate this again neatly, we offer a high quality fabric tape with, which you can find under the accessories in this description.An assembly instruction is of course also supplied. Our Alcatraz lamp grid fits especially well to the kit (is also installed on some of the product photos). The grid can also be found under the accessories in this description.

€159.95*
Details