Flat Track Handlebar Kit - Bonneville

€269.95*

Colour

item number:	CR-LC-1010-ST-SW
Shop-number:	CB13003

Product information "Flat Track Handlebar Kit - Bonneville"

Complete handlebar kit including brake line & clutch cable for Triumph Bonneville T100 & T120

Would you like to have a more comfortable / upright riding position on your Bonneville?
Give your Bonneville a slightly old school look at the same time?
Then the Flat Track handlebar kit is just the thing for you.
The classic handlebars, which are offset towards the rider, ensure a very comfortable position on the motorbike, but still guarantee a great deal of control over the front wheel.
In addition, the look on the Bonneville is simply awesome (see pictures and video below the description).

About the kit / assembly

The Flat Track handlebar kit includes:
- Flat Track steel handlebars (dimensions see last product picture)
- Specially made brake line especially for the Bonneville
- Specially manufactured clutch cable in the appropriate length

Fitting the kit is a good deal more complicated than a normal handlebar swap.
The reason for this is that the brake line has to be replaced and on the Bonneville this goes to the ABS block (this is in the region of the rear swing arm).
Good screwdriver skills should be available.

Parts certificate / approval

The handlebars are supplied with a TÜV parts certificate and must be registered with your trusted TÜV inspector.

Grip heater

The original Triumph accessory grip heater cannot be used with this (or any other accessory handlebars).
However, if you do not want to do without a heated grip, we recommend the very high-quality Koso heated grips from our range - see accessories article below this description.

Accessories / Handlebar end weights

- The original handlebar end weights of the Bonneville can NOT be used.
You will find two good alternatives in the accessories section

Raisch tips:

Mirrors:
For a nice overall look in the handlebar area, we recommend nice new mirrors.
Either handlebar end mirrors (then you don't need handlebar end weights but order suitable adapters for the mirrors.
Or nice under bar mirrors.

Seating comfort:
To get even more seating comfort and relief on long journeys, we recommend our additional forward-mounted Relax footrests.

Triumph LC ab 2016	Bonneville T100 EU 4 Bonneville T100 EU 5 Bonneville T100 EU 5 + Bonneville T120 EU 4 Bonneville T120 EU 5 Bonneville T120 EU 5 +

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Accessories

Heating handels CB00196M / RS600

High-quality heated grips for your Triumph Bonneville / Thruxton or Scrambler. The Koso heated grips are stylish and unobtrusive. No bulky external adjuster or similar will detract from the look of your motorbike. The heated grips HG17 can be attached to all standard motorcycles and are designed with an integrated adjustable thumb switch. The integrated thumb switch allows the driver to adjust the temperature of the handles safely without having to take their hands off the handlebars. The different temperature levels of the handles always give the driver the optimum warmth. The LED display with 5 different coloured LEDs completes the modern appearance of the handles and allows the driver to quickly determine which temperature level is set. Another special feature of the HG17 heated grips is the ‘low-voltage battery’ protection. The system detects when the battery voltage is too low and then automatically switches off the heated grips. This ensures that the battery still has enough power to start and operate the engine. Features: • Protective device that automatically switches off the handles when the voltage of the motorcycle battery is too low. • Wide temperature range always provides optimum heat. • Coloured LED display that allows the driver to always see directly what temperature the handles are at. • With removable handlebar end caps: allows the additional installation of handlebar end weights or handlebar end indicators • Max. temperature up to 100 degrees • With ECE approval mark: E24*10R06/02*4752*00

From €147.95*

Details

Rizoma Cap Handlebar endweight CB12903 / RS5

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

€34.95*

Details

Rizoma Cap Handlebar endweight CB11312.1M / RS0

From €39.00*

Details

Motogadget Mo.Club 130 CB11623 / RS0

Motogadget mo.view Club 130 handlebar end mirrors in a sporty classic oval design (road legal) for 22 mm & 1" handlebars. These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame, and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike! The mirror can be mounted both upwards and downwards on the handlebars (fits left & right). Mounting: You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little). Or you can order the Motogadget mirror extension, which allows the mirror to be mounted at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted). There is also an adapter that allows both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description) The mirror arms are manufactured to the same dimensions as the Motogadget handlebar end indicators and Motogadget handlebar grips, so that you have completely edge-free transitions when you mount everything Dimensions:Width of the mirror body: 114 mm Height of the mirror body: 80 mm Thickness of the mirror body without ball head: 4.5 mm Length of the mirror arm: 110 mm Diameter of the clamp: can be used for 22 mm and 1 inch handlebars Width of the clamp: 12 mm The size of the mirror surface of the m.view flight complies with the StVZO and it has ECE labelling. This makes it suitable for any motorbike without registration. Price per piece.

€99.00*

Motogadget Mo.View Classic 60 CB11837 / RS0

Motogadget Mo.View Classic 60 handlebar end mirror WITH E-number in classic, round design. Fits all 22 mm & 1" handlebars. These new and beautiful Motogadget mirrors have a completely new mirror technology! They work completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is incorporated directly into the metal of the body. The aluminium itself is the mirror surface! This enables a weightless design without a rim or frame and the mirror body itself is extremely thin and light. Glass breakage or glass falling out is simply not possible! A new mirror design that is unrivalled on the market, but will not be found anywhere else! These mirrors really are an absolute highlight on any motorbike! The mirror can be mounted both upwards and downwards on the handlebars (fits left & right). The mirror arm can also be swivelled, making it easy to mount the mirror in the perfect position. Mounting: You can clamp the mirror directly around the handlebars (simply push the fittings inwards a little). Or you can order the Motogadget mirror extension, which makes it possible to mount the mirror at the end of the handlebars (see accessory article in this description). This extension also provides a perfect handlebar end (our absolute recommendation if no handlebar end indicators are fitted). There is also an adapter that allows both the handlebar end mirrors and the Motogadget handlebar end indicators to be fitted without having to push the fittings further inwards. In other words, a handlebar extension that still has a mount for the M.Blace disc indicators on the outside. (See Motogadget Disc / Cone Adapter in the accessories section of this description) Dimensions: Diameter of the mirror body: 96 mm Thickness of the mirror body without ball head: 4.2 mm Length of the mirror arm: 60 mm Diameter of the clamp: suitable for 22 mm and 1 inch handlebars Width of the clamp: 10 mm Weight: 125 g Price per piece.

€99.00*

Underbar Mirror Kit Triumph Bonneville CB12289.1M / RS-1

Motogadget Underbar Mirror Kit for Triumph Bonneville T100 & T120 Give your Triumph T100 or T120 a modern, clean look! With the Motogadget Underbar Mirror Kit, you get a minimalist and stylish design for your handlebars. Fits the original Triumph handlebars as well as some aftermarket handlebars – and of course with E-marking and road legal. Flat & unobtrusive line for a cool look Thanks to these underbar mirrors, your handlebars stay nice and flat and tidy. The mirrors are barely noticeable and give your bike a modern, sleek line. With the adjustable knuckle joint, they can be aligned wonderfully flat under the handlebars – nothing disturbs the clean look anymore! And despite the minimalist design, you still have an excellent rear view – often even better than with most accessory mirrors that are mounted above the handlebar. You simply look past your waist instead of over your shoulders. The view is not quite as far-reaching as with the long, original mirror arms, but for a stylish look and city traffic, they are perfect. Scope of delivery & assembly instructions The kit includes a mirrorless Motogadget mirror with E-number, a black screw and a black cap nut for easy installation in the original mount. Choose the version that's right for you, because you can choose between three different mirrors. Installation tip: The mirrors must be precisely adjusted so that you have the best view to the rear and the mirror does not touch the tank when turning. Detailed installation instructions are of course included! High-tech mirror without glass – the mirrorless motogadget mirrors These mirrors set new standards! They manage without any glass at all, because the patented mirror surface is worked directly into the metal. This means that the aluminum itself acts as a mirror surface. The result is a rimless, slim design without a frame – super light and robust. Broken glass and falling parts are a thing of the past! This mirror design is truly unique and a real highlight for any motorcycle.The price is for 1x mirror + 1x adapter

From €119.00*

Details

Underbar Flat-Style Mirror CB11512M / RS-1

Underbar mirror in a flat flat style with oval mirrors. Suitable for Bobber & Bobber Black, Speedmaster. These mirrors provide a really flat look above the handlebars, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Nevertheless you have a very good view to the back (better than in most normal mirrors mounted on top), because you don't have to look at the shoulders anymore but only at the talie vorbai. Looks great on both the Bobber/Speedmaster and Bonneville models!A black coated screw is included to fix the mirror. Due to the black head of the screw, it is virtually invisible above the fittings.When mounting the mirrors you have to be a little careful, because they have to be adjusted exactly so that you have a view to the rear, but the mirror does not reach the tank when the handlebar is turned.The mirrors are without E-number! If you absolutely want to have an E-number, but still want to use underbar mirrors, we recommend the round version of the underbar mirrors, because these are with E-number (see similar articles in this description).Translated with www.DeepL.com/Translator

From €39.95*

Details

Underbar Classic Round mirror CB11513M / RS-1

Underbar mirrors with classic round mirrors for those who prefer the classic style. Suitable for Bobber & Bobber Black, Speedmaster. These mirrors ensure a really flat look above the handlebars, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Nevertheless, you have a very good view to the rear (better than in most normal mirrors that are mounted at the top), as you no longer have to look past your shoulders but only past your waist. Looks great on both the Bobber/Speedmaster and Bonneville models! The mirror has now been replaced with a high-quality Highsider Retro mirror, which is of a much higher quality in terms of workmanship and finish, see the last two pictures. A black-coated screw is included in the scope of delivery to attach the mirror. Due to the black head of the screw, it is virtually unnoticeable above the fittings. You have to be a little careful when fitting the mirrors, as they have to be adjusted precisely so that you have a view to the rear, but the mirror does not touch the tank when the handlebars are turned. The mirrors are E-marked!

From €69.95*

Details

Flat Track Handlebar Kit - Bonneville

Product information "Flat Track Handlebar Kit - Bonneville"

Complete handlebar kit including brake line & clutch cable for Triumph Bonneville T100 & T120

Ask a question

Previously asked questions