€0.00*

Vintage handlebars - internal cable routing

Skip image gallery

€119.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

item number: 7198-LN42HDMK3LL
Shop-number: CB13002

Product information "Vintage handlebars - internal cable routing"

Vintage handlebars with internal cable routing for Triumph Bobber & Speedmaster 1200
920mm wide


The name Vintage says it all & the pictures say even more.
The Vintage Bar is the perfect handlebar if you want to give your Bobber a really cool old school look and also make it much more comfortable.
The Vintage handlebar is the middle ground between the Old School and the Wide Bar.


Internal cable routing

The Vintage handlebars are supplied with 3 elongated holes (two on the outside and one in the centre).
This allows you to route the cables from the bar ends and the cables from the fittings inside the handlebars. Visually, this is an absolute hit, as the handlebar area looks much tidier (see pictures).

However, the handlebars can of course also be used without routing the cables inside.


Cable & wire length

As the original cables, brake line & clutch cable are not long enough, the cable extension kit from our programme must be ordered in addition (see accessories article in this description).
The handlebars can then be easily replaced in about an hour's work. Instructions are included.


Handlebars & handlebar end caps

The original handlebar end caps and mirrors can no longer be used. We have fitted our under-bar mirrors to the motorbike in the photos (looks very cool, you can see well and they have an E number).

You can also find the mirrors and matching handlebar end weights in the accessories section of this description.


Grip heating

The original Triumph heated grips can no longer be used in this (or any other accessory handlebars on the market).
However, if you do not want to do without heated grips, we recommend the Koso heated grips from our range - see accessories below the product description.


ABE - road approval

The handlebars have an ABE for some models and do not need to be registered separately for these.
For all models not covered by the ABE, the handlebars must be registered by the TÜV (but this is not a problem).
You can download the ABE under Downloads and search for your model


Handlebar dimensions

a 920 width
b 60 Height at the end of the outer bend
c 150 Depth to the rear
d 25 Height at the end of the handle
e 220 Measured at the intersection of the outer edges of the tube


Fehling Lenker Ma




youtube-placeholder
Triumph LC models from 2016:
  • Bobber
  • Bobber Black
  • Speedmaster
Downloads "Vintage handlebars - internal cable routing"
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 16" / Bobber Black Euro 5 + / BJ 2026 -
Bobber 19"
1
1
1
1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

Heating handels
Heating handels CB00196M / RS600
High-quality heated grips for your Triumph Bonneville / Thruxton or Scrambler. The Koso heated grips are stylish and unobtrusive. No bulky external adjuster or similar will detract from the look of your motorbike.  The heated grips HG17 can be attached to all standard motorcycles and are designed with an integrated adjustable thumb switch. The integrated thumb switch allows the driver to adjust the temperature of the handles safely without having to take their hands off the handlebars. The different temperature levels of the handles always give the driver the optimum warmth. The LED display with 5 different coloured LEDs completes the modern appearance of the handles and allows the driver to quickly determine which temperature level is set. Another special feature of the HG17 heated grips is the ‘low-voltage battery’ protection. The system detects when the battery voltage is too low and then automatically switches off the heated grips. This ensures that the battery still has enough power to start and operate the engine. Features: • Protective device that automatically switches off the handles when the voltage of the motorcycle battery is too low. • Wide temperature range always provides optimum heat. • Coloured LED display that allows the driver to always see directly what temperature the handles are at. • With removable handlebar end caps: allows the additional installation of handlebar end weights or handlebar end indicators • Max. temperature up to 100 degrees • With ECE approval mark: E24*10R06/02*4752*00

From €147.95*
Details
Rizoma Cap Handlebar endweight
Rizoma Cap Handlebar endweight CB11312.1M / RS0
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

From €39.00*
Details
Rizoma Cap Handlebar endweight
Rizoma Cap Handlebar endweight CB12903 / RS5
This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

€34.95*
Details
Underbar Classic Round mirror
Underbar Classic Round mirror CB11513M / RS-1
Underbar mirrors with classic round mirrors for those who prefer the classic style. Suitable for Bobber & Bobber Black, Speedmaster. These mirrors ensure a really flat look above the handlebars, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Nevertheless, you have a very good view to the rear (better than in most normal mirrors that are mounted at the top), as you no longer have to look past your shoulders but only past your waist. Looks great on both the Bobber/Speedmaster and Bonneville models! The mirror has now been replaced with a high-quality Highsider Retro mirror, which is of a much higher quality in terms of workmanship and finish, see the last two pictures. A black-coated screw is included in the scope of delivery to attach the mirror. Due to the black head of the screw, it is virtually unnoticeable above the fittings. You have to be a little careful when fitting the mirrors, as they have to be adjusted precisely so that you have a view to the rear, but the mirror does not touch the tank when the handlebars are turned. The mirrors are E-marked!

From €69.95*
Details
Handlebar Weights Flat Cap for Steel Handlebar
Handlebar Weights Flat Cap for Steel Handlebar CB00187.2M / RS100
LSL handlebar weights chrome or black for 1 , 22mm steel handlebar pair. Internal thread at the original socket must be removed or bored.

From €24.95*
Details
Underbar Flat-Style Mirror
Underbar Flat-Style Mirror CB11512M / RS-1
Underbar mirror in a flat flat style with oval mirrors. Suitable for Bobber & Bobber Black, Speedmaster. These mirrors provide a really flat look above the handlebars, because with these mirrors there is nothing more. An extremely cool style, because the mirrors are hardly noticeable. Nevertheless you have a very good view to the back (better than in most normal mirrors mounted on top), because you don't have to look at the shoulders anymore but only at the talie vorbai. Looks great on both the Bobber/Speedmaster and Bonneville models!A black coated screw is included to fix the mirror. Due to the black head of the screw, it is virtually invisible above the fittings.When mounting the mirrors you have to be a little careful, because they have to be adjusted exactly so that you have a view to the rear, but the mirror does not reach the tank when the handlebar is turned.The mirrors are without E-number! If you absolutely want to have an E-number, but still want to use underbar mirrors, we recommend the round version of the underbar mirrors, because these are with E-number (see similar articles in this description).Translated with www.DeepL.com/Translator

From €39.95*
Details
Kabelkit Bobber & Speedmaster lang
Kabelkit Bobber & Speedmaster lang CB11545 / RS0
Das Kabelkit mit längeren Zügen, Leitungen & Kabeln wird benötigt, um den hohen Ape-Hanger oder einen anderen sehr breiten oder hohen Lenker an der Bobber & Speedmaster zu verbauen.

€154.00*
Underbar Mirror Kit Triumph Bobber / SpeedMaster
Underbar Mirror Kit Triumph Bobber / SpeedMaster CB11779.2M / RS-1
Motogadget Underbar mirror kit for Triumph Bobber, Bobber Black & Speedmaster Make your Triumph Bobber, Bobber Black or Speedmaster even more stylish! The Motogadget Underbar mirror kit gives you an extremely cool and flat design for your handlebars. This kit fits the original Triumph handlebars and many aftermarket handlebars and is of course road-legal and approved with an E-mark. Clean & Cool – mirrors for the minimalist look These Underbar mirrors give your handlebars a flat and clean line. The mirrors are barely noticeable due to their slim design and give your bike a really modern and minimalist look. The adjustable hinge allows the mirrors to be aligned perfectly and flat under the handlebars – nothing disturbs the clean look anymore! And yet you still have a great view to the rear – in most cases even better than with classic accessory mirrors that are mounted above the handlebars. The trick is to look past your waist instead of over your shoulders. While the original mirrors with their long arms offer an even wider view, these Underbar mirrors are the perfect choice for a stylish, flat look! Scope of delivery & assembly The kit includes a mirrorless Motogadget mirror with E-number, a black screw and a black cap nut for easy mounting in the original holder. Choose the version that's right for you, because you have three mirror options to choose from. Note: Precision is required when installing the mirrors so that visibility is optimal and the mirror does not touch the tank when the handlebars are turned. Assembly instructions are of course included! High-tech mirror without glass – the mirrorless Motogadget mirrors These mirrorless mirrors are real masterpieces! They manage without any glass at all, as the reflective surface is integrated directly into the metal. The patented technology turns the aluminium itself into a mirror surface – the result is an ultra-thin, rimless design without a frame. No broken glass, no loose parts – just a slim, lightweight mirror body that perfectly complements your bike's design. This design is unique and an absolute highlight for every motorcycle enthusiast!The price is for 1x mirror + 1x adapter

From €119.00*
Details