License plate screw set
€8.90*
Available, delivery time: 1-3 days
| item number: | 211257519 |
| Shop-number: | CB11444 |
Product information "License plate screw set"
These screws are powder coated in the matching colors (white / blue / black) for the license plate.
We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst.
Delivery:
1x screw M5x20 blue
2x screw M5x20 black
3x screw M5x20 white
4x self-locking nut M5
4x washer M5 DIN9021
The advantages of powder-coated screws:
- Mechanically resilient
- Corrosion resistant
- Weather resistant
- Environmentally friendly
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Roadster EU 3
R nineT Roadster EU 4
R nineT Roadster EU 5
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12
R12 G/S
R12 S
R12 nineT
|
| Triumph 400er |
Scrambler 400
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5
Scrambler 900 / Street Scrambler EU 5 + ( BJ 2025 )
Scrambler 900 / Street Scrambler EU 5 + ( BJ 2026 - )
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5
Speed Twin 900 / Street Twin EU5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
HeckWeck Kit AC
CB00468M
/ RS-1
From
€169.00*
Raisch Rear Fairing Kit for Triumph Bonneville, Thruxton & Scrambler
With our HeckWeck Kit, your Triumph will have a completely tidy and clean rear end. The large original rear mudguard and the entire standard plastic rear assembly are removed, making way for a significantly sleeker and higher-quality solution.
The HeckWeck Kit is one of the most minimalist and elegant rear conversions available for these motorbikes.
High-quality, Made in Germany
The aluminium base plate supplied ensures good splash protection. The number plate holder and base plate are precision-machined from aluminium in Germany and then powder-coated in black.
An LED number plate light with an E-mark is included as standard.
For installation, we supply a suitable connector for the original wiring harness. This means no modifications need to be made to the motorbike. All necessary cables, connectors, heat-shrink tubing and fitting materials are, of course, also included.
If you’d prefer to avoid the hassle of wiring and crimping, you can have this work carried out by us. The option for pre-wired components can be added to the set below.
3-in-1 indicators – ! ESSENTIAL !
As the HeckWeck kit does not include a central rear light, 3-in-1 indicators must be used. These combine indicators, a rear light and a brake light in a single housing.
Further down in this description, you can order suitable 3-in-1 indicators directly as part of the set and receive a 10% discount on the indicators. All indicators on offer have an E-mark and are approved for road use.
Two versions available
Version 1
The indicators are mounted on the inside of the shock absorber using a mounting plate. This makes them virtually invisible when switched off and ensures the cleanest possible look.
However, this variant does not comply with the StVZO, as the indicators are positioned too far towards the rear.
Version 2
The indicators are fitted directly to the number plate holder. The indicator brackets are already integrated.
This version is legal and complies with the StVZO.
Accessories to ensure you’re 100% legal on the road.
For a fully legal setup, a reflector must also be fitted to the number plate. You’ll find the matching reflector further down the page and can add it directly to your set.
You’ll find matching front indicators right at the bottom of the accessories section.
HeckWeck Kit - Thruxton 1200
CB10948M
/ RS-1
From
€199.00*
Classicbike-Raisch Heck-Weck Kit for Thruxton 1200 - R - RS - TFC.Made in Germany
The rear of a CafeRacer should look this clean and tidy. Precisely manufactured in-house from aluminium and black powder-coated.
Indicator holders: These must be ordered separately. You will find two different indicator holders below the description.Vario indicator holder: The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).This version is legal & StvO compliant. Indicator holder strut:The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far into the rear).
The rear lower fairing (lower shell) provides good splash protection. LED licence plate lighting with E-number is also included in the scope of delivery. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included in the scope of delivery.The licence plate holder is small enough to accommodate any motorbike licence plate available in the world and is completely concealed.
As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal.
Even inexperienced mechanics can easily convert them (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu.
If you don't have the confidence to do the wiring for the lights yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators).
If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators).
We also recommend ordering our licence plate screw set so that you can mount the licence plate nicely (accessory item HeckWeck Kit / LC under the 3-1 indicators).
Rear conversion AC Schnitzer
CB10600
/ RS21
€159.00*
AC Schnitzer rear rear fenders with new LED taillight (no backlight) with ABE
Lucas rear kit
CB11042M
/ RS2
From
€139.95*
Motone rear conversion kit (without mudguard) for Triumph Bonneville / Thruxton & Scrambler.
The optimum rear kit for all those who want a short rear without mudguards but with a central rear light.
A plug-and-play solution that requires no additional accessories.Everything you need is included. Underbody plate, licence plate holder, indicator holder, the rear light and a cable set that can be plugged into the original plug of the vehicle.
What is not included are new indicators (the original ones can no longer be used). All standard accessory indicators can be used here. We recommend either the Drops indicators (very classic and slightly larger) or the Pico indicators (classic shape but very small) to match the kit.
Rear light variants: The kit is available with 4 different rear lights:- Classic Lucas tail light- Gort tail light (Lucas shape but slightly more modern) - Eldorado tail light (simple round inconspicuous) - Stop Light
All rear lights have an E number and an integrated licence plate light.
Classicbike-Raisch tip for all those who want a very clean rear:We also offer our own HeckWeck kit, this is even more minimalist and for 3 in 1 indicators with integrated rear light.
Triumph Main Stand Kit
CB10766M
/ RS600
From
€275.00*
High-quality tailor-made main stand kit that facilitates the cleaning and maintenance of the rear wheel. With complete assembly accessories.
HeckWeck Kit - Bonneville models
CB11198.1M
/ RS-1
From
€199.00*
Rear conversion kit / short rear for Triumph Bonneville T100 / T120.Made in Germany
Our HeckWeck kit gives your bike a really sporty & tidy rear end. The large original mudguard disappears and the rear is significantly shorter (looks particularly cool with short, narrow seat benches such as the Cool Seat or the Tamarit SIlverstone Seat).The kit is probably the most minimalist and cleanest Plug&Play rear end you can buy.
Attention: If you have a StreetTwin or other flat seat on your Bonneville (e.g. our Cool Seat, the Tamarit Silverstone Seat or the flat Triumph accessory seat), you should choose the kit for the StreetTwin.
The kit consists of: A lower shell (serves as a splash guard in the rear & as a holder for electronic components under the seat), an aluminium number plate holder (both black powder coated), an LED number plate light (with E-number, holes on the number plate holder are already present), all cables, plugs & screws required for installation (a plug that fits into the original wiring harness is included), as well as very detailed step-by-step installation instructions.
As the HeckWeck kit does NOT include a central tail light, it is essential to have 3in1 indicators (these combine indicator, tail & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal.With the kit in combination with the 3-1 indicators, the rear is completely clear and the licence plate is perfectly flush with the seat (no central rear light is required). If you don't feel like wiring, crimping and soldering the enclosed cables and plugs, you can also order this service (accessory item HeckWeck Kit / LC under the 3-1 indicators).In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness. Even inexperienced screwdrivers can carry out the conversion without any problems (as the installation instructions are very detailed). Resistors are not necessary as the flashing frequency can be set via the menu.
Suitable indicators for the front can be found further down in the accessories section of this description.
Indicator holderThese must be ordered separately (below the description)Indicator holder Vario: The turn signals are mounted directly on the licence plate. Brackets are then attached to the licence plate holder. (Stvo compliant).
Indicator holder strut inside: The indicators are mounted on the inside of the suspension strut with a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant as the indicators are too far to the rear.
If you want to have it 100% correct for TÜV & police, you can order an additional reflector (accessory item HeckWeck Kit / LC under the 3-1 indicators).We also recommend ordering our licence plate screw set for a nice mounting (accessory article HeckWeck Kit / LC under the 3-1 indicators).
Rizoma Alu Rear Mudguard BL & SI
CB11264M
/ RS2
€235.00*
Aluminum mudguards for Bonneville and StreetTwin models.
Fitting to the front wheel fender, Rizoma also has a rear wheel fender in the same aluminum finish.
The mudguard is supplied with plug and play with mounting brackets and screws. Holes for the taillight must be set individually. We recommend the rear lights which can be found in the accessories of this description,
The license plate must be attached to the side of the wing or an additional license plate must be fitted.
Universal license plate holder
CB11294M
/ RS600
From
€29.95*
Universal identification holder for mudguards.
The license plate is universal for many mudguards. It is screwed from the inside to the fender (see photo)
Motone rear kit - LC
CB11402M
/ RS1
€279.95*
Rear light kit - Tail Tidy for Triumph Modern Classics
Suitable for the following models
Triumph Street Twin
Street Scrambler
Street Cup
Bonneville T100 & T120
Speed Twin 900
Scrambler 900
Plug & Play
The rear kit comes to you completely ready to fit:
Rear light included
Matching cable set
all mounting material
No tinkering, no guesswork. Fit, connect, done.
Road approval
The rear light has an E number and is authorised for road use as normal.Registration? Not necessary.
Indicators - the choice is yours
Indicators are not included in the scope of delivery.But they fit perfectly, because you can create exactly the look you want:
classic on the road → Drops indicators
as discreet as possible → Pico indicators
or simply continue to use the original Triumph indicators
Everything is compatible.
Classic tail without rear mudguard
The Motone Tail Tidy is the clean solution if you want to remove the original rear mudguard but still want to ride with a central tail light.
Timeless, tidy, just right for the classic lines of the Triumph Modern Classics.
Rear light variants
The kit is available with different rear lights.The classic par excellence:
Lucas rear light - tried and tested, timeless, simply always fits
Tail Tidy Eliminator Kit
CB00451
/ RS1
€99.00*
Classicbike-Raisch rear mudguard eliminator kit for Triumph AC models Bonneville, Thruxton & Scrambler.
Cool look without the big original rear wing and without the huge tail light.Consisting of a black coated aluminium plate that serves as a splash guard, an aluminium number plate holder, mounting material and installation instructions.We recommend ordering the Raisch cable set as well. This can be plugged into the original wiring harness and only needs to be connected to the turn signals / tail light. You will find the cable set under the accessories in the description.
The licence plate holder fits with the 2 holes in the seat screw connection and at the same time serves as a support for the tail light & indicators.
Matching tail lights can be found under the accessories below the description.
We recommend the licence plate screws and a reflector as optional accessories (for those who want to be 100% legal).
Tail Elimination Kit Thruxton / Speed Twin
CB11023M
/ RS1
From
€249.00*
Classicbike-Raisch rear fender eliminator kit.
A sleek rear end with a central LED tail light, further emphasizing the sporty lines of the Thruxton / Speed Twin.
Precisely manufactured in-house from stainless steel & aluminum (black coated).100% accurate fit and TÜV compliant, does not need to be registered.
Due to the rear under fairing (lower shell), which is included in the kit, there is a good splash protection for electrics and all other components in the rear area of the Thruxton / Speed Twin.
The LED tail light (with E-mark) fits perfectly to the sporty, classic look. Available in red, clear or dark. A license plate light is integrated in the tail light.The original Triumph turn signals can NOT be used. Therefore we recommend to order a pair of nice small LED turn signals (matching the LED tail light).For mounting the turn signals, a turn signal holder is included, which sits with the license plate. This is variable in width adjustable to have the perfect measure depending on the license plate width and turn signals (see picture 3 & 4).
Further down in this description you can order the turn signals right in the set and then get 10% discount on the turn signals.
The matching holes for the taillight, license plate and turn signals are of course already present. Thus, nothing more must be drilled & you have a plug & play solution, without extra adjustment work. It comes with a connector that fits into the original wiring harness. That is, only turn signals, tail light, etc. must be crimped and can then be connected without having to change anything in the wiring harness. The conversion succeeds even less experienced screwdrivers without problems, because a detailed installation guide is included. Resistors are not necessary, because the flashing frequency can be set via the vehicle menu.
Accessory recommendations:
Who does not trust himself to make the wiring for the lighting itself or simply does not feel like it, which can order the ready wiring to it (see accessories article rear Eliminator Kit / LC further down in the description).
Who wants to have it 100% correct for TÜV & police, which can still order a reflector in addition (accessory article rear Eliminator Kit / LC).
In addition, we recommend our license plate screw set to order, in order to mount the license plate can be beautiful (accessory article rear Eliminator Kit / LC).
Scope of delivery:
License plate holder
Turn signal holder vario (the width can be adjusted individually depending on the license plate and turn signal length)
LED tail light
Aluminum rear lower shell
Cable set
Mounting material
Mounting instructions
Heavy Duty Aluminium Rear Fender
CB11063M
/ RS600
From
€219.95*
A beautifully short aluminium mudguard that can be fitted plug & play. Fits all Bonneville, Scrambler and Thruxton models.
The mudguard is made of very high quality solid aluminium (optionally in polished or matt brushed finish). It is slightly wider than the B-PP-A Au mudguard, which we also offer. This makes it perfect for anyone who rides a slightly wider rear tyre (140, 150 or 160). It also hangs slightly lower than the original one to give a flatter line (less air between mudguard and tyre).
AC Schnitzer KZ holder in the center
CB10823
/ RS600
€228.99*
Center plate holder for AC Schnitzer fuet BMW R9T
Rizoma Licensholder Fox
CB11227.1M
/ RS0
From
€283.00*
The Rizoma label carrier "FOX" with or without taillight. is the absolute classic in the motorcycle industry for years and convinces without many words through its sophisticated adjustment system and perfectly developed construction. The rear of the BMW R nineT will be significantly shorter and sporty and tidier.
The scope of delivery includes: license plate plates, license plate light, bracket for Rizoma indicator, reflector, rear underfloor. The turn signal or turn signal / taillight combination can either be attached to the license plate with the included turn signal holders or two holes are drilled into the sub-trim. For the variant without taillight, a turn signal / taillight combination must be installed.
Heavy Duty Rear Fender LC
CB11293M
/ RS3
From
€224.95*
Aluminium rear fender for Bonneville and Street models.
The fender is made of thick, high-quality aluminium and can be bolted on to Bonneville T100+T120 and all Street models plug & play. It replaces the bulky and long original mudguard.
Indicator holder, licence plate holder, rear light & indicators must be ordered separately. Or you can order the Raisch aluminium fender kit.
Raisch Aluminium Rear Fender Kit
CB11296M
/ RS0
From
€224.95*
Aluminium Rear Fender Kit – Classic Version
The Classic Version of our tried-and-tested Aluminium Rear Fender Kit features classic, harmonious lines. Although the mudguard is significantly shorter and more beautifully proportioned than the original Triumph part, it is longer than our Short Version. The classic length and side seam preserve the traditional vintage look and complement the Modern Classic Triumph models perfectly.
Many riders want to get rid of the large original rear fender with its rear light and indicators, but still don’t want to do without a rear fender altogether. That’s exactly why we’ve developed this kit.
The mudguard is made from high-quality aluminium and impresses with its very clean finish and perfect fit. The kit comes complete with the necessary brackets and is straightforward to fit.
The mudguard is pre-drilled for our Eldorado & Reprobate rear light. There is also a cable grommet for the matching cable set.
Accessories – you’ll find them all below the product description
Indicator brackets – must be ordered separately
There are four different indicator bracket options to choose from.
The version with the indicators mounted on the inside of the shock absorber looks particularly sleek. However, this version is not road-legal.
The matching indicator brackets can be ordered at the same time – you’ll find them below the product description.
Number plate holder – must be ordered separately
Various number plate holder options are available for the rear kit.
Centre-mounted number plate holders:
Undertaker number plate holder including number plate lighting and angle adjustment. It is fitted beneath the mudguard.
Number plate holder for Eldorado rear light. The number plate is positioned above the mudguard, directly on the rear light.
Universal number plate holder. It is attached to the rear light bolts beneath the mudguard.
Side number plate holders:
For a particularly clean rear view, the kit can also be combined with a side number plate holder. Variants are available for the swingarm or the shock absorber.
Note: Neither of the side number plate holders is approved for road use.
You’ll find this information below the product description.
Rear light & indicators – must be ordered separately
The Eldorado and Reprobate rear lights have been specially designed for this rear kit and can be ordered at the same time.
You’ll also find matching indicator lights further down this page.
Other accessories – important optional extras
Wiring harness
The wiring harness is recommended if you do not wish to make any modifications to the original wiring harness. This allows the conversion to be fitted without leaving any traces.
Number plate screws
Colour-matched number plate screws are available to ensure a neat finish.
Reflector
If you want to fit your rear end in a 100% legal manner, you’ll also need a reflector. You can order this directly as well.
Suitable for:
Triumph Bonneville T100
Triumph Bonneville T120
Triumph Street Twin
Triumph Street Cup
Triumph Street Scrambler
Triumph Scrambler 900
Triumph Speed Twin 900
License plate holder Horst adjustable
CB11406
/ RS3
€74.95*
The license plate holder model Horst is an angle adjustable bracket for mounting on the fender. Includes license plate illumination and turn signal mount on the holder (suitable for all turn signals with M6 & M8 thread). Concentrator Holder Horst is the optimal license plate holder for anyone who wants to build a shorter fender on his motorcycle and does not want the license plate to hang down like a rat's tail on the fender. Because here the KZ is screwed directly onto the fender, through the adjustment the license plate remains recognizable even from behind.
In the photo with the arrow you can see how the adjustment works. This allows the holder to be used universally for each fender rounding and length.
In the photos you can see as an example, how we used the holder for the rear modification on a Bonneville.
Dimensions of the license plate: width 177mm / length 165mm
LED Stripe Tail Tidy BMW R9T
CB12076M
/ RS-10
From
€309.00*
Classicbike-Raisch LED Stripe rear suitable for all BMW R nineT models. Street legal!
The LED Stripe rear is the most noble & elegant rear for nineT models that we have in our range.The rear of your nineT is given a minimalist & modern look with this kit, through the filigree milling bracket and the modern LED strip & completely legal! The tail light with breaklight is with E-number and the tail complies with all StvO standards. Here nothing needs to be registered with the TÜV. Simply attach & enjoy.
The LED bracket milled from aluminum fits perfectly to all BMW original seats as well as the BMW hump. A perfect fit on all seat benches is guaranteed by the spacer kit, which is included. This kit contains different spacers to distance the height of the milling bracket perfectly to the respective installed seat. The kit of course also works with numerous seat benches from the accessories, such as the Cool Seat from our range.Also with the passenger pillion frame everything fits perfectly.
The bracket for the LED strip is milled from an aluminum block in Germany and then anodized deep black. The LED strip (with E-number) is then glued into the milling bracket. This makes the part look like it was cast from one piece.
Included in the kit is an aluminum underbody plate, which replaces the original plastic shell. For the R nineT Euro 4 & 5 models, the plastic box for the control unit is also replaced. This is unsightly on the one hand because it is made of plastic and on the other hand because it builds up very low and thus disturbs the line of the rear area. Through the new aluminum sheet you no longer look from the side on the edge of the box & the rear gets a perfect line.
The scope of delivery includes all materials, such as screws, cable ties, heat shrink tubing, connectors, etc., as well as a very detailed step by step instructions to ensure easy & problem-free installation.
To buy the kit reduced in the set, simply below the description, the accessory items such as turn signals, reduced order.
License plate holder: The kit is delivered WITHOUT a license plate holder.
Since the kit looks just awesome with both a central and a side license plate holder! Our recommendations:Variant 1: License plate holder HeckWeck R9T / This holder is mounted centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant does NOT need to be registered). This is the holder, which is also mounted on some product photos.Variant 2: License plate holder HeckWeck R9T - Short / This holder is mounted as in variant 1 centrally under the rear and was developed specifically for the LED Stripe rear (StvO compliant must NOT be registered). The difference to variant 1 is that the short version is much shorter and has an adjustment for the angle of the license plate. This allows us to mount the license plate significantly shorter (steeper than 30 °) but for TÜV or controls within a handle to be able to put down to 30°.
Variant 3 Side license plate holder:There are 4 different holders to choose from: 1. the Vario holder: an inexpensive (but still very high quality) holder reduced to the bare essentials (the most inconspicuous of all), which fits all license plate sizes and is variably adjustable in position - must be registered individually.2. the Rizoma holder: Probably the highest quality holder of all. This holder is supplied with a parts certificate and can simply be fitted (does not have to be registered with the TÜV).3. the adjustable bracket: A sophisticated bracket with an aluminum license plate, which also has variable adjustment. Must also be registered by individual approval. 4. The AC-Schnitzer holder: A license plate holder milled from solid material with parts certificate.
Turn signal:
In the milling bracket is on both sides a 8er bore, this allows it to mount any turn signal with an M8 thread. He is held turn signal by a grub screw, which is included.Who does not want to mount a turn signal on the bracket, which can order the turn signal plugs (further down in this description). These then serve as blind plugs for the turn signal hole.
Further down in this description you can order all, to the rear matching turn signals, from our range in the bundle. In the bundle you will automatically be granted a discount of 10% on all turn signals.
Accessories:
Classicbike-Raisch recommends for easier installation still turn signal plugs & tail light plugs.For all those who want to be 100% legal on the road, there is still a reflector as an accessory.To mount the license plate, we recommend the license plate screw set.
All parts you can order below in the description with it.
To buy the kit reduced in a set click on the button "buy this item in a set" above under shopping cart
Luggage:The LED bracket goes to the same mounting points as most luggage systems. Together with the LED stripe rear, the Unit Garage bags can be mounted.
Note on the BMW alarm system: Our base plate does not have any fixing points for the alarm system. If you would still like to have it installed, we recommend attaching the alarm system with double-sided adhesive tape.