CNC machined aluminum cover for the steering head nut of all BMW R nineT models. The original Lemkkopf nut of the R9T's is not exactly beautiful. To replace this is quite costly, because the handlebars must be disassembled for this. So we offer you here a very chic and practical cover. It is simply plugged over the steering head nut and covers this completely. The cover is put on it within seconds or pulled off again. The Milled design of the steering head cover is the same as our other Milled Producten (tank emblems, brake reservoir cover ...)

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

For all Fatbar Handlebars (R9T & Scrambler) For all Fatbar accessories handlebars as used on all R9T models (does not fit the original handlebar) The price is for one pair.

This chic and filigree Rizoma finish weight is the perfect finish for any power steering. It is beautifully narrow and falls thereby only discreetly (as it should be). The high-quality aluminum is silver or black anodised. It is especially good for the Rizoma Classic Retro & Revers Retro The end weight fits into every highln accessory handlebars from 22mm to 1 "since different adapters are included in the scope. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

High quality and noble handlebar weight of Rizoma. The weights are either black or sillber anodized. It is available with a plastic end cap or without (the black cap does not only add a color accent, but this is individually interchangeable, if you get scratches on a wall or so). The weights fit into any high-end accessory handlebar from 22mm to 1 "since different adapters are included in the scope. The handlebars are also suitable for attaching / clamping some Rizoma handlebar mirrors. For some motorcycles, there are also suitable adapters to mount the end weights to the original handlebars (see the accessories in this article).

These chic end weights of the brand LSL fulfill several functions. On the one hand, they serve as a chic handlebar end to the other, they serve as a handlebar widening to mount all handlebar end mirrors that have a clamping diameter of 29.8mm. Who wants to use the weight only as a handlebar end and not for mounting mirrors, we recommend the matching handlebar weight ring to order (see accessories in this description). The weights are equipped with universal expansion dowels, which allow them to mount in almost all common accessory handlebars. Fits all handlebars with an inner diameter of 12 - 22mm. The weights are fine glass bead blasted before anodizing, giving them a very classy, slightly matte finish. In addition, they are supplied with a small cap, which comes into the clamping screw in front of head, which hides the screw head. Dimensions: Handlebar weight Ø: 36.6 mm Width: 20.5 mm Holder for handlebar end mirrors with outer clamp: Diameter: 29.8 mm Width: 12 mm Weight: 72 g Scope of delivery: 1 pair, incl. mounting material 2 x clamping sleeves each with Ø 12 and 16 mm 2 x spacer sleeves each with Ø 14, 18 and 21 mm 2 x M6 central screws2 x M6 cone nuts __________________________________________________ Note for mounting on BMW R9T models with original handlebars: The R9T original handlebars have a M10 internal thread. This can be drilled to 12mm, then it is possible to use the weights in combination with the original handlebar.

Lenkerverlängerung für LSL Lenkerendenspiegel Für alle Fatbar Zubehör Lenker, wie sie an allen R9T Modellen verbaut sind (passt nicht für den originalen Lenker). Zur Montage von Zubehörspiegel, die um den Lenker geklemmt werden. Der Preis ist für ein Paar.  

Serve as a cover for the handlebars on the original fork bridge of the R9T. To cover when a mute bucket is installed.

Real leather bag for mounting on cross handlebars or a handlebar cross brace. Looks cool and is very practical. Who does not know it, you ride a short round with your bike and have your mobile phone, wallet, keys or similar in your pocket. All the time you grab your leg to make sure that nothing falls out of your pocket. With this small bag, the problem is solved. It also gives the handlebars of your bike a really nice look. Only works with bolted handlebar struts, not with cross handlebars with welded-in handlebar struts.

LSL handlebar weights chrome or black for 1", 22mm and FatBar (all R9T models) Alu handlebar pair. The internal thread of the original handlebar must be removed or drilled out.

Handlebar extension for mounting handlebar end mirrors on the original handlebars of BMW motorbikes These handlebar adapters can be screwed directly into the original handlebars of your BMW. The Motone and other handlebar end mirrors can then be clamped onto the adapters.The adapters are sold as a pair.

The SW-Motech hand protector kit protects your bike's handlebar fittings in the event of a fall and your hands from the effects of the weather, such as cold air and rain. The base is a sturdy aluminium bracket to which the sports handguards are attached. The impact-resistant plastic of the shells is flexible and offers the best protection against external factors. The slim shape and matt black look also provide a stylish design element on the handlebars.Just the thing for all BMW riders who want to give their motorbike a light off-road / motocross look. Handguards are very practical for riders who ride in wind and weather, they keep the hands drier and provide wind protection so that the hands do not get cold. The handguards are available in two versions: Sport: which have slightly smaller shells.Adventure: Larger shells like on a classic enduro bike. Sturdy closed aluminium frame Timeless design with handguards made from impact-resistant Moplen plastic Large handguards offer the best protection against the elements Easy mounting of the handguards on the aluminium brackets, replaceable if required Scope of delivery 2 x BBSTORM hand protector shells, left and right 1 x Barkbusters hand protector mounting kit, left and right Fitting instructions Mounting material

When fitting a new handlebar to all BMW R Nine T models, it is necessary to drill two holes in the new handlebar. The original fittings are then locked in place. Since it is not easy to drill a hole in round material (like a handlebar) and these have to be exactly opposite, we offer this drilling template. This is simply put around the handlebar and screwed. So it is very easy to drill the two holes exactly opposite each other.