Skip to main content Skip to search Skip to main navigation

YSS shock absorbers High End BlackLine

Product information "YSS shock absorbers High End BlackLine"

YSS High End Black Line shock absorbers suitable for ALL air-cooled Triumph modern Classic models.

The shock absorbers are equipped with adjustable compression & rebound and adjustable length adjustment.
The special feature of these YSS high-end shock absorbers is that the compression can be adjusted separately in high and low speed. The shock absorbers can therefore be adjusted even more finely.

The shock absorber has a basic length of either 340 mm or 360 mm and can be adjusted by +/- 5 mm using the integrated length adjuster.

Length of standard shock absorbers:
Bonneville: 337mm / The YSS shock absorbers are therefore longer, raise the rear of the Bonneville, offer more ground clearance and longer suspension travel.
Thruxton & Scrambler: 360mm

The 360mm shock absorbers can be used for the Bonneville as a longer version to get the rear higher / steeper and to have more ground clearance.
The 340mm shock absorbers can be used for the Thruxton & Scrambler to make the bike a little flatter.

Customised for you

With individually adjustable rebound damping.
As YSS often installs these shock absorbers ex works with springs that are far too hard for the vehicle types mentioned, Classicbike-Raisch offers the right springs for different weight classes.
When ordering, please specify the approximate rider weight (including motorbike clothing) - there is a comment field for this at the end of the ordering process.
We guarantee an absolutely suitable shock absorber specially tailored to each rider / his weight & needs.



The shock absorbers are supplied with ABE, so they do not have to be registered.

Classicbike-Raisch is a YSS service partner. We can carry out all revisions, repairs and other customer requests in-house.



The shock absorber

With the YSS shock absorber you get one of, if not the best shock absorber in the middle class. A shock absorber with an absolutely top price/performance ratio that is far superior to the original series shock absorber.

Just right for those who don't want to dig too deep into their pockets and don't need a premium / Öhlins shock absorber.

YSS sticker

All YSS shocks are supplied from the factory with unsightly stickers on the housing.
If you would like to have these removed, you can order the accessory item (below the product description).

Models Triumph AC until 2015:
  • Bonneville SE Gussrad
  • Bonneville T100 EFI
  • Bonneville T100 Vergaser
  • Scrambler EFI
  • Scrambler Vergaser
  • Thruxton 900 EFI
  • Thruxton Vergaser
Triumph AC bis 2015
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Thruxton 900 EFI
Thruxton Vergaser
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

Remove YSS stickers CB13077 / RS
All YSS suspension struts are supplied from the factory with unsightly stickers on the housing. To remove the stickers, the spring must be pressed off the strut. Unfortunately, the stickers are very stubborn and have to be painstakingly removed. If you would like your shock absorber to look a little nicer and want the stickers removed, you can order this accessory here.

€25.00*
Shock caps CB12684M / RS10
Shock absorber caps including stainless steel screws for the shock absorbers of all Triumph models.The turned caps are either made of aluminium (black anodised or polished) or brass. According to the manufacturer, the shock absorber screws must be replaced after a change. The caps also give a much more harmonious finish to the shocks and the unsightly original screws disappear. On the Thruxton, Speed Twin & Scrambler, only the two upper screws are replaced.

From €19.95*
Shock caps CB12504.1M / RS600
Shock absorber caps including stainless steel screws for the shock absorbers of all Triumph models.The turned caps are either made of aluminium (black anodised or polished) or brass. According to the manufacturer, the shock absorber screws must be replaced after a change. The caps also give a much more harmonious finish to the shocks and the unsightly original screws disappear. On the Thruxton, Speed Twin & Scrambler, only the two upper screws are replaced.

From €19.95*