€0.00*

Solitude Seat

Skip image gallery

€950.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

item number: 010100-R-U
Shop-number: CB12078M

Product information "Solitude Seat"

Solitude Seat for Triumph SpeedTwin by Rennstall Moto.

This seat is not just a seat, it changes the look of the rear end immensely and gives your bike a completely different look!
The seat can be plug & play replaced with the original seat. A CNC-milled tank connection, spacers and an aluminium base plate ensure a stable holder and a very good fit.

The rear also fits with the original Speedtwin mudguard. For a cool look, however, we recommend installing our HeckWeck kit in addition. If you want to keep the original aluminium mudguard in any case, we recommend ordering our short number plate holder. You can find both items in the accessories section of this description.

The rear is optionally available in raw (unpainted) or the three original Speed Twin colours (Korosi Red, Silver Ice & Jet Black). It can also be ordered with a seat base plate only, to cover yourself or ready covered with a very high quality imitation leather.
The painted parts usually have a delivery time of approx. 3-6 weeks.

All parts are manufactured in Germany, are TÜF tested and are supplied with a parts certificate.
Assembly instructions and everything else required for assembly are included in the scope of delivery.

There are other body parts from the Royal series that perfectly match the rear end (see accessories in this description).

Triumph LC models from 2016:
  • Speed Twin - 1200
Triumph LC ab 2016
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
5
5
5
5

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

License plate holder Short Speed Twin
License plate holder Short Speed Twin CB11930 / RS0
Short number plate holder for Triumph Speed Twin 1200 made of stainless steel and black powder coated. The perfect and most minimalist number plate for the original aluminium mudguard of the Speed Twin. We have made the licence plate holder extra small for the new version, so that the licence plate holder can be used for any country in the world.Dimension (height x width): 100mm x 160mmWe now also offer additional Vario indicator holders that can be mounted on the licence plate holder (optional / you will find the holders under the accessories in this description). The holder replaces the ugly and much too long original plastic licence plate holder.Mounting material, licence plate holders and detailed step-by-step mounting instructions are included. If you want to make your tail even cleaner, you can replace the original tail light with 3-1 turn signals / tail light combination turn signals. To do this, you need the "Triumph tail light replacement for 3-1 turn signals" kit (see accessories article). The number plate light disappears nice and deep into the mudguard and is hardly visible. This way the number plate moves nice and close to the mudguard. No ABE, certificate or similar is required for our short licence plate holder. It complies with the StvO and does not need to be registered. Simply install it and you can continue to ride legally. In order to ride completely legally, a reflector must of course be installed. You can either use the original one (which we do not recommend, as it is very large) or you can order the small reflector from our range (see accessories in this description).To mount the annoying number plate as discreetly as possible, we offer an optional number plate screw set (see accessory article).We have taken great care in the design to ensure that the holder does not come into contact with the rear wheel even at maximum compression, which is not the case with all holders on the market.

€79.95*
HeckWeck Kit - Speed Twin 1200
HeckWeck Kit - Speed Twin 1200 CB11745 / RS-2
Model: Speed Twin 1200 - EU 4 / 2017-20 | Version: Version 1
Short tail for Triumph Speed Twin 1200 With this rear end, the Speed Twin looks much sportier and lives up to its name. The rear is made a little shorter by removing the mudguard. This makes the rear end look really crisp! Indicator brackets: These must be ordered separately. You will find two different indicator holders below the description.Vario indicator holder: The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).This version is legal & StvO compliant. Indicator holder strut:The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear). The kit consists of: An aluminium lower shell (serves as a splash guard in the rear & as a holder for electronic components under the seat), an aluminium number plate holder (both black powder-coated), an LED number plate light (with E-number, holes on the number plate holder are already present), all cables, plugs & screws required for installation (a plug that fits into the original wiring harness is included), as well as very detailed step-by-step installation instructions. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal.With the kit in combination with the 3-1 indicators, the rear is completely clear and the licence plate is perfectly flush with the seat (no central rear light is required). If you don't feel like wiring, crimping and soldering the enclosed cables and plugs, you can also order this service (accessory item HeckWeck Kit / LC under the 3-1 indicators).In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness. Even inexperienced screwdrivers can carry out the conversion without any problems (as the installation instructions are very detailed). Resistors are not necessary as the flashing frequency can be set via the menu. You will find suitable indicators for the front below this description. If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LCunder the 3-1indicators). We also recommend ordering our licence plate screw set for a nice installation (accessory article HeckWeck Kit / LC under the 3-1 indicators).

€199.00*