Dakar Kit - Scrambler 1200

Retro design heat shield for Triumph Scrambler 1200! Immerse yourself in the nostalgia of days gone by and give your Scrambler 1200 a touch of classic flair with our exclusive retro design heat guard. Made from aluminium, this heat protection plate pays homage to the timeless elegance of the old Scrambler motorbikes.While the original, round and therefore very bulky looking heat protection plate is actually only used for heat protection and looks like a foreign body, the retro plate also serves as a real design element on your Scrambler. Fancy a race number? Every real Scrambler needs a race number! Preferably your own.No problem. Among the accessories in this description, you can also order a customised decal with your desired start number. Why you will love our retro design heat protection plate: Aesthetics and functionality combined: the heat shield has been designed with attention to detail to represent the authentic retro design of classic scrambler motorbikes. At the same time, it offers effective protection against heat and burns High-quality materials: The heat shield is manufactured in Germany. After laser cutting and manual edging, the sheet metal is powder-coated in black. Perfect fit for your Triumph Scrambler 1200: Plug & Play replacement with the original in about a minute. Unique retro design: The vintage-inspired design gives the exhaust side of your Scrambler 1200 a striking look and is reminiscent of a classic old Scrambler. Finish: Black powder-coated Brushed aluminium & clear anodised (this creates a very similar look to the original aluminium mudguard parts of the Scrambler) Fits with the original and all accessory exhaust systems where the original exhaust cover is still used.

Classicbike-Raisch rear Weck Kit for Triumph Scrambler 1200 models.Made in Germany! Road Traffic Regulations compliant - Legal! Probably the cleanest & most minimalistic rear kit that is available for the Scrambler 1200! It took us a long time to finish the rear kit for the Scrambler 1200, but the many days of work and countless prototypes were worth it! The kit provides a completely free rear end, which makes any Scrambler look much more brutal. The nice short frame makes the Scrambler look much more compact and beefy.The HeckWeck kit is supplied as a complete kit. It includes:  Aluminum rear under fairing (which provides for a very good splash protection, as well as a very clean look. The cheap original plastic also disappear) License plate holder + Vario bracket (license plate is adjustable in the angle) / The license plate plate is 170 x 100mm large, so that each license plate size of each country is covered LED license plate light All screws, nuts, cable ties etc. needed for mounting Detailed step by step assembly instructions, which allows even hobbyists to easily assemble the kit The absolutely coolest thing about the rear end is that we have trimmed something to be able to realize the kit legally. Due to the short rear end of the Scrambler, it is not possible to construct a license plate holder that adheres to the specified 30 ° angle and at the same time ensures that the license plate does not make contact with the rear wheel when the motorcycle times really strong compression. So we came up with an ingenious adjustment for the license plate that makes it possible to adjust the angle of the license plate.This allows the license plate to be set a little steeper in continuous operation, which of course also looks visually more awesome. For the TÜV visit or a traffic control is a seconds quick grip with some force on the license plate and everything is legal. See picture 4 & 5The supplied stop nuts ensure that the license plate can not inadvertently adjust while driving. The kit does NOT include a central tail light, this must be ordered separately.Here you have several options to choose from: Option 1: You order a set of 3 - 1 turn signals + turn signal holder in addition and mount these on the right and left side of the license plate (100% legal solution). Below the description you can order the turn signals (in the bundle we give you 10% discount on the turn signals) and the turn signal holder directly in the set with it. Option 2: You order the Shorty taillight + weld-in housing, insert a mini LED taillight in the original rear frame and install normal turn signals. Visually, this is a very elegant solution, but of course much more expensive. The Shorty taillight and the housing can be found below the description and can be ordered as a set. Additional accessories that you can order below the description in the set: Cable set: We recommend you to order this in any case! If you don't have it, the original Triumph central connector has to be cut off and you have to wire everything separately. On the cable set you get, if you order it in the set with 30% discount!  Turn signal holder: Here are 2 different to choose from.- The Vario turn signal holders are screwed together with the license plate on the license plate holder and can be adjusted in width, so they can be adjusted to fit any country, any turn signal (with 8mm thread - most turn signals have) and any license plate size. - The turn signal adapters - Scrambler 1200 are attached to the frame of the Scrambler, making the turn signals very inconspicuous (but are still in a legal position). This variant is only legal in kombiantion with a central taillight (because the taillight may not slide so far into the rear and 3-1 turn signals would not be legal at this point). License plate screw set: Who wants to fix his license plate with matching colored screws, which can order a set with it. Reflector: Who wants to have a 100% legal rear, which must mount a reflector with under the license plate.

The Alcatraz grille is a precise lamp grille made in Germany that looks very solid & high quality and also protects your headlight from rough stone chips. In reference to the famous American prison Alcatraz, the lamp grid reminds of massive bars. The completely made of aluminum grid is lasered in many individual parts & then welded by hand. Through the protruding individual struts, the grid gets a 3D look and does not just sit flat in front of the lamp, as is the case with most other grids. The lamp grid is available in either black powder coated or silver glass bead blasted (this is a really classy, matte aluminum surface).The scope of delivery includes all screws & sleeves that are needed for mounting. 

Alcatraz clip-on lamp grille - attached to and removed from the headlight with a single click/handle.The practical thing about the clip-on lamp grille is that it can be fitted within a second. The grille is simply clipped over the original headlight ring and then holds firmly in place. If you want to remove it, simply pull it off with a little force. This is also particularly practical when cleaning the motorbike, because you can simply remove the grille to clean the headlight lens. The struts of the Alcatraz grille have the same lines as the LED unit of the Triumph headlight and the Triumph bulb in the centre (see pictures). However, the grille also fits and looks good on the halogen headlights of the first Bobber series. Visually, the grille enhances the original headlight of your Bobber and skilfully creates a highlight on the motorbike. The clip-on Alcatraz lamp grilles.They are manufactured from high-quality, carbon fibre-reinforced plastic using a state-of-the-art 3D printing process. The surface is then smoothed and the grilles are painted in a black satin finish.This results in a very attractive and high-quality surface.