€0.00*

Forward-mounted footrests - Bobber

Skip image gallery

€389.00*

Prices incl. VAT plus shipping costs

product-image
Zubehörartikel
€339.00*
€969.00*
from €79.95*
from €75.95*
from €79.95*
item number: A9770115
Shop-number: CB12919

Product information "Forward-mounted footrests - Bobber"

Forward offset footrests for Triumph Bobber models from Triumph Genuine Accessories

Only fits models from VIN/chassis number ending with: 854156

Attention: The footrest mounting kit is also required to mount the footrests (can be found under accessories in this product description).


Seating position

Many people do not like the seating position or knee angle of the Bobber in its original condition. In terms of looks, the Bobber has a strong tendency to look like a typical chopper, but the riding position does not, as the pegs sit more like on a touring bike.
If you want not only a chopper look but also the typical, cosy chopper seating position, you should definitely move your pegs forwards!


Classicbike-Raisch tip

  • A for visual reasons, we recommend installing the forward-mounted peg system from Wunderkind (the Triumph peg system is extremely bulky due to the fat carrier in front of the engine).

  • B from a technical point of view (the Wunderkind footrest system is adjustable).
    You can also find the Wunderkind footrest system in the accessories section of this description.

  • For even more of a chopper look and feel, we recommend fitting a wider handlebar to your Bobber. You can also find some of these in the accessories section.

Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
600
600
600
600

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

New
Mounting kit for forward-mounted footrests - Bobber
Mounting kit for forward-mounted footrests - Bobber CB12920 / RS
Assembly set for fitting the forward offset footrests for Triumph Bobber from the Triumph original accessories range. This set is essential if you want to fit the original Triumph forward controls to your Bobber. Full fitting instructions for the set can be viewed online. Only fits Bobber models with chassis number FIN 854156 or higher

€339.00*
Forward-mounted footrest system - Bobber
Forward-mounted footrest system - Bobber CB11414 / RS0
Forward-mounted, adjustable footrest system for Triumph Bonneville Bobber A bobber is not a sporty naked bike - it wants to cruise! That's exactly what this forward-mounted footrest system has been developed for. CNC-milled from high-quality aluminium and anodised in deep black, it not only looks great, but also finally gives you the riding position that suits this motorbike. More comfort & real cruiser style The original footrest system on the Bonneville Bobber sits quite far back - almost like a sports bike.For anyone who sees the Bobber as a classic chopper on which you can sit comfortably, the forward-mounted peg system is a must.The forward-mounted system gives you a much more relaxed knee angle and a comfortable, cruiser-style riding position. Just as a bobber should be. Individually adjustable The system can be adjusted in three stages and moves your feet forwards by approx. 140 mm, 155 mm or 170 mm as required. In addition, the angle of the brake and gear lever can be individually adjusted - so you are guaranteed to find your perfect position. High-quality workmanship CNC-milled aluminium, deep black anodised Elegant look and extremely robust Three adjustment positions for maximum flexibility Customisable brake and shift lever angle With parts certificate - registrable and legal Once fitted, your bobber finally feels the way it should look: relaxed, casual and ready for the long tour. Classicbike-Raisch style & comfort tip If you want to round off the style and seating comfort of your Bobber in a chopper style, we definitely recommend fitting a different handlebar.A significantly wider handlebar that is cranked more towards the rider looks absolutely perfect and also ensures a much more comfortable riding position.We have included three handlebar recommendations in the accessory products below the product description.

€969.00*
Old School Bar for Bobber & Speedmaster
Old School Bar for Bobber & Speedmaster CB11619.1M / RS1
The comfortable width! Our recommendation."1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 1005mm width (exact dimensions see photo). The Old School Bar is really nice wide and has a 115mm high offset. The handlebar is also cranked to the driver. You can't sit more comfortably on a Bobber or a Speedmaster.In our opinion this is the best handlebar, both from an optical and ergonoimic point of view.As the name Old School Bar suggests, the handlebars give the bobbers a really cool Old School look, as it was with the bobber conversions in the 50s.Since the original cables, brake line & clutch cable are not long enough, the cable extension kit must be ordered from our program (see accessories article in this description).This way the handlebars can easily be replaced in about 1 hour of work. A manual is included.The original handlebar end caps as well as the mirrors cannot be used any longer. On the bike on the photos we have installed our Under Bar mirrors (looks very cool, you look good and they are with E-number).You can find the mirrors as well as suitable handlebar end weights also under the accessories in this description. The handlebar is delivered with a TÜV certificate.

€79.95*
Details
Wide Bar for Bobber & Speedmaster
Wide Bar for Bobber & Speedmaster CB11618M / RS1
The Flat & Width!"1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 1020mm width (exact dimensions see photo). The Wide Bar has a very flat line, is really wide and relatively straight.The photos say more than words about the look the handlebars give the bike. Due to the slight cranking a comfortable ride is guaranteed.Since the original cables, brake line & clutch cable are not long enough, the cable extension kit must be ordered from our program (see accessories article in this description).This way the handlebars can easily be replaced in about 1 hour of work. A manual is included.The original handlebar end caps as well as the mirrors cannot be used any longer. On the bike on the photos we have installed our Under Bar mirrors (looks very cool, you look good and they are with E-number).You can find the mirrors as well as suitable handlebar end weights also under the accessories in this description.The handlebar is delivered with a TÜV certificate.

€75.95*
Details
Beach Bar for Bobber & Speedmaster
Beach Bar for Bobber & Speedmaster CB11617.1M / RS1
The Cruiser!1" steel handlebar in chrome or black, suitable for Bobber, Bobber Black & Speedmaster in 950mm width (exact dimensions see photo). The beach bar has a chic flat line and gives the bike a really cool chopper look by the bend at the end of the handlebar.As the name Beach Bar already says, this handlebar is just the right thing for all those who like to cruise on the beach with their bike or just cruise relaxed over the country road.The kink at the handlebar end gives you a very special and relaxed riding feeling.Since the original cables, brake line & clutch cable are not long enough, the cable extension kit must be ordered from our program (see accessories article in this description).This way the handlebars can easily be replaced in about 1 hour of work. A manual is included.The original handlebar end caps as well as the mirrors cannot be used any longer. On the bike on the photos we have installed our Under Bar mirrors (looks very cool, you look good and they are with E-number).You can find the mirrors as well as suitable handlebar end weights also under the accessories in this description. The handlebar is delivered with a TÜV certificate.

€79.95*
Details