Bag adapter universal
| item number: | SYS.00.004.10000L/B |
| Shop-number: | CB11700M |
Product information "Bag adapter universal"
Universal bag adapter that fits on various bags (e.g. the Oldschool luggage cases from our assortment) to attach them to the Legend Gear SLC holder.
With it you can turn any bag into a modern motorcycle luggage system, which can be mounted on and off in a few seconds. A further advantage of this system is that the SLC holders are not so noticeable visually, so that they can also remain mounted on the motorcycle.
Size of the adapter plate: 30 x 22 cm
The matching Legend Gear SLC Side Pocket Carrier must be ordered separately & model specific (see accessories in this description).
- Easy attachment of the adapter plate to the eyelets on the back of the bag with four screws.
- Only one handle: quick-release system of the adapter plate guarantees secure hold of the bag on the holder
- Model-specific SLC side rails are available separately
- Comfortable opening of the quick-release fastener via a drawstring
- Adapter plate is optionally available for the left or right side
- Before the first use the quick-release fastener is mounted to the adapter plate and this to the bag.
- Mounting material + mounting instructions are included in the scope of delivery
| Models BMW R nineT: |
|
|---|---|
| Models Triumph AC until 2015: |
|
| Triumph LC models from 2016: |
|
| BMW R nineT |
R nineT /5
R nineT Pure EU 4
R nineT Pure EU 5
R nineT Racer
R nineT Roadster EU 3
R nineT Roadster EU 4
R nineT Roadster EU 5
R nineT Scrambler EU 4
R nineT Scrambler EU 5
R nineT Urban GS EU 4
R nineT Urban GS EU 5
|
|---|---|
| BMW R12 |
R12
R12 G/S
R12 S
R12 nineT
|
| Triumph 400er |
Scrambler 400
Speed 400
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 16" / Bobber Black Euro 5 + / BJ 2026 -
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5
Scrambler 900 / Street Scrambler EU 5 + ( BJ 2025 )
Scrambler 900 / Street Scrambler EU 5 + ( BJ 2026 - )
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5
Speed Twin 900 / Street Twin EU5 +
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
600
600
600
600
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
R9T - Legend Gear SLC pannier holder
CB11044M
/ RS600
From
€100.00*
SLC side carrier left, all BMW R9T models (can only be used on the left side of the Scrambler if a bottom-mounted exhaust is fitted).
Not all SLC brackets are still availableThe SLC system from SW-Motech is being phased out! The brackets that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.
The precise, model-specific development of the SLC side carriers allows simple and secure mounting to the original mounting points on the vehicle. The Legend Gear LC1/LC2 side bags (see accessories below the description) can be attached and removed in a matter of seconds using a quick-release system, without the rider having to do without reliable bag fastening. Also very suitable for a large number of bags, which can then simply be screwed onto the three attachment points.
The SLC side carrier, customised for the BMW R nineT Classic, Urban, Pure, Racer & Scrambler, blends in perfectly with the appearance of the bike
Model-specific shape enables simple mounting on one or two sides.
Material: Tubular steel
Note
The SLC side carrier is also compatible with the universal side mount for attaching all kinds of items.
Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The holders that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.
Legend Gear side bag carrier AC
CB11517M
/ RS600
From
€95.00*
SLC side carrier for air-cooled Triumph models. Suitable for Bonneville, Bonneville SE, Thruxton & Scrambler.
Attention: Only possible on the right-hand side of the Scrambler if a bottom-mounted exhaust is fitted.
The precise, model-specific development of the SLC side carriers allows simple and secure installation at the original mounting points on the vehicle. The Legend Gear side bags can be attached and removed in a few simple steps using a quick-release system, without the rider having to do without reliable bag fastening.
Model-specific shape allows easy mounting on one or two sides, also suitable for bikes with overhead exhaust
The SLC side carrier made of sturdy tubular steel guarantees secure attachment and removal of the Legend Gear side bags in seconds (see accessories)
Material: Tubular steel
Please note
The SLC side carrier is also compatible with the universal side mount for attaching all kinds of items.
Tip: As an alternative to the SLC side carrier, e.g. for conversions and custom bikes, the universal Legend Gear SLS saddlebag holder is ideal.
Scope of delivery
1 SLC side carrier
Mounting material
Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The holders that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.
Legend Gear SLC side bag carrier LC
CB11516M
/ RS600
From
€85.00*
SLC side carrier for water-cooled Triumph Modern Classc models and the Speed / Scrambler 400.
Attention for Bonneville models: If you have NOT fitted the original retaining bracket, you must order the additional adapter "Bonneville LC SLC bracket adapter without retaining bracket". This can be found under accessories in this description.If a flat seat (such as the Cool Seat, Viper) is also fitted, the bracket for Street Twin must be ordered.
Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The brackets that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.
The precise, model-specific development of the SLC side carriers allows simple and secure mounting to the original mounting points on the vehicle. The Legend Gear side bags can be attached and removed in a few simple steps using a quick-release system, without the driver having to do without reliable bag fastening.
Model-specific shape allows easy mounting on one or two sides, also suitable for bikes with overhead exhaust
The SLC side carrier made of sturdy tubular steel guarantees secure attachment and removal of the Legend Gear side bags in a matter of seconds (see accessories)
Material: Tubular steel
Note
The SLC side carrier is also compatible with the universal side mount for attaching all kinds of items.
Tip: As an alternative to the SLC side carrier, for example for conversions and custom bikes, the universal Legend Gear SLS saddlebag holder is ideal.
Scope of delivery
1 SLC side carrier
Mounting material
Not all SLC holders are still availableThe SLC system from SW-Motech is being phased out! The holders that are no longer in stock will no longer be available. If you still want to use the "old" Legend Gear bags, you have to order the new V-LOC holder & the adapter to SLC - both items can be found under the accessories below this description.