Skip to main content Skip to search Skip to main navigation

Bottel Exhaust - Bonneville T120 / T100

Product information "Bottel Exhaust - Bonneville T120 / T100"

Classic stainless steel exhaust system ina ‘bottle’ design

For Triumph Bonneville T100 & T120 – with E-mark / road approval



At last, there’s a classic bottle-style exhaust system for the water-cooled Triumph Bonneville – and it’s fully approved!
How many years have we (and many customers) been waiting for exactly this?



Sound

The bottle exhaust delivers a beautifully deep, bassy sound – exactly as you’d expect from a classic Triumph.
The DB killers are fitted in the video.
If you prefer a slightly more robust sound, you can of course remove the DB killers or modify them slightly. 

If that’s still not enough sound for you, we recommend removing the original catalytic converter box. This requires an X or XL pipe, which you’ll find listed under ‘Accessories’ below the product description.



Look & Design

A real highlight on the bike:
The classic ‘bottle’ shape in a sleek, elegant design complements the Modern Classic models perfectly.

On the Bonneville, the exhaust runs at a slightly steeper angle than the original, giving the rear end a much more harmonious line.


 



In a nutshell

  • Classic bottle design in stainless steel

  • With E-mark →road-legal

  • Removable DB killers
  • Rich, bass-heavy sound with or without DB killers

  • Suitable for Triumph Bonneville T100 & T120

  • Visually perfectly matched to the bike’s lines 

Triumph LC ab 2016
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
2
2
2
2

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

X-Pipe / KAT & Front silencer replacement CB11302 / RS0
These X-Pipes replace the original Cat-Box / front silencer, which provides a much more pithy sound. In combination with an additional open exhaust system you get a really pithy, dull but also loud sound. That's exactly how a 2 cylinder must sound!In addition, there is a weight saving of 1.7 kg compared to the standard catbox. If the X-Pipe is not only about the more beautiful and louder sound, but also about noticeably more power, we advise you to use one of our power kits, in which the X-Pipe is included. Then the whole thing brings also a strongly noticeable performance gain. Click here for our performance kits. The original veneer can be used again, so that the X-Pipe is not optically noticeable.  Do NOT fit to Thruxton TFC!

€209.95*
XL-Pipe De-Cat replac CB11934 / RS1
Model: Bonneville T100 / T120
These X-Pipes replace the original Kat-Box / front silencer, which provides a much more pithy sound. In combination with an additional open exhaust system, this results in a really throaty, dull but also loud sound.Also in combination with the original exhaust system you get a much more pithy sound.This is exactly how a 2 cylinder must sound!In addition, the original manifold connecting pipes that go from the cat box to the rear silencers are replaced.Additionally, the X-Pipe and the new manifold pipes result in a significant weight reduction.If you are not only interested in a more beautiful and louder sound, but also in noticeably more power, we advise you to install a large air filter cover and a sports air filter. In addition to that, you have to install a Power Commander and tune the bike on a test bench.The original paneling can be reinstalled, so that the X-Pipe doesn't attract attention.The installation of the X-Pipe / removal of the cat is not legal.

Variants from €499.00*
€759.00*