Dakar Kit - Scrambler 1200

€679.00*

% €808.85* (16.05% saved)

item number:	CBR-LC-KIT-0165
Shop-number:	CB12837

Product information "Dakar Kit - Scrambler 1200"

Classicbike-Raisch Dakar Aluminum Kit for all Triumph Scrambler 1200 models

Your scrambler conversion to perfection – robust, stylish & unique

Do you want to give your Triumph Scrambler 1200 an uncompromising off-road design? Then the Dakar Aluminum Kit is perfect for you!

This complete conversion kit contains some of our most popular Classicbike-Raisch add-on parts – perfectly matched to your scrambler. And the best thing? When you buy the set, you save a whopping 15%

What you get in the Dakar Kit:

High-quality aluminum parts in a striking Ripped Dakar design:

- Radiator protection – protection for your radiator with a stylish off-road look
- Chain guard kit - consisting of two robust aluminum parts
- Fork protectors - more protection for your forks on rough roads
- Upper mudguard - for the real scrambler style
- Underride protection - keeps stones and dirt away from your engine

All parts are made in Germany and are powder-coated in black, so they not only look cool, but also last a long time.

Want more Dakar style? No problem!

You can also find other accessories from our Dakar line in this product description – in case you want to customize your scrambler even more. Some parts are a matter of taste, but all of them perfectly complement the kit and ensure a coherent look.

Your scrambler – your style!

With the Dakar Aluminum Kit, you can transform your Scrambler 1200 into a real off-road bike. The look? Aggressive, rugged, ready for any terrain – just the way it should be!

Triumph LC ab 2016	Scrambler 1200 XC / X EU 4 Scrambler 1200 XC / X EU 5 Scrambler 1200 XC / X EU 5+ Scrambler 1200 XE EU 4 Scrambler 1200 XE EU 5 Scrambler 1200 XE EU 5+

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Retro exhaust trim - Scrambler 1200 CB12632M / RS0

Retro-style heat shield for the Triumph Scrambler 1200! Immerse yourself in the nostalgia of days gone by and give your Scrambler 1200 a touch of classic flair with our exclusive retro-design heat shield. Made from aluminium, this heat shield pays homage to the timeless elegance of vintage Scrambler motorbikes.Whilst the original, round and therefore rather clunky heat shield is really only intended for heat protection and looks a bit out of place, the retro shield also serves as a genuine design feature on your Scrambler. Fancy a race number? Every proper Scrambler needs a race number! Preferably your own. No problem. Among the accessories listed in this description, you can also order a customised design featuring your chosen race number. Why you’ll love our retro-design heat shield: A blend of aesthetics and functionality: The heat shield has been designed with attention to detail to capture the authentic retro design of classic scrambler motorbikes. At the same time, it offers effective protection against heat and burns High-quality materials: The heat shield is manufactured in Germany. After laser cutting and hand-edging, the sheet metal is powder-coated in black. Perfect fit for your Triumph Scrambler 1200:Plug-and-play replacement for the original in around one minute. Unique retro design: The vintage-inspired design gives the exhaust side of your Scrambler 1200 a striking look, reminiscent of a classic old-school scrambler. Finish: Black powder-coated Raw aluminium – ideal for brushing the panel (to achieve a finish similar to that of the original parts) or painting the part in your chosen colour. Compatible with the original and all aftermarket exhaust systems where the original exhaust trim is retained.

From €69.95*

Details

HeckWeck Kit – Scrambler 1200 CB12394 / RS-10

Classicbike-Raisch rear end conversion / short rear end – Triumph Scrambler 1200 Made in GermanyComplies with the German Road Traffic Regulations (StVO) – legal for use on public roads Probably the cleanest rear end for the Triumph Scrambler 1200 Our Classicbike-Raisch rear conversion transforms the standard rear end of the Triumph Scrambler 1200 into an extremely clean, minimalist rear end. We have been working on this solution for a long time – countless prototypes and many hours of development work were required until everything fitted perfectly. The result: a completely uncluttered rear end that gives any Scrambler a significantly more rugged look. Thanks to the significantly shorter frame end, the motorbike appears more compact, more muscular and simply more harmonious. Complete plug-and-play kit The rear kit is supplied as a complete conversion kit and contains everything required for installation. Contents: Aluminium rear under-panellingprovides excellent splash protection and a very clean look. The original plastic part is completely hidden. Number plate holder with Vario mountAdjustable number plate bracket. Number plate (170 × 100 mm)Suitable for number plates of all countries and sizes. LED number plate light Complete fitting kitAll necessary screws, nuts, cable ties, etc. Detailed step-by-step installation instructionsso that even DIY enthusiasts can carry out the conversion themselves without any problems. The clever number plate solution The truly ingenious thing about our rear end is a small technical refinement. Due to the very short rear end of the Scrambler 1200, it is structurally almost impossible to maintain the prescribed 30° number plate angle and ensure that the number plate does not collide with the rear wheel during heavy suspension compression Our solution: a clever adjustable number plate mount. This allows you to angle the number plate slightly more steeply for everyday use – which looks much better.For an MOT or a roadside check, a quick adjustment to the number plate is all it takes to bring the angle into the legally correct position in seconds (see pictures). The built-in stop nuts ensure that the angle cannot be accidentally adjusted whilst driving. Required accessories Indicator bracket (2 variants available) Vario indicator holder Mounts directly onto the number plate holder Adjustable width Suitable for any indicator with an 8 mm thread Compatible with all number plate sizes and countries Indicator adapter – Scrambler 1200 Mounts directly onto the frame Indicators sit extremely discreetly Important:This version is only legal in combination with acentral rear light, as the rear light must not extend more than 30 cm towards the rear.3-in-1 indicators would not be permitted in this position. 3-in-1 indicators with an integrated rear light are required The rear kit replaces the Scrambler’s original rear light. You will therefore needindicators with integrated rear and brake lights (3-in-1).This solution is fully legal. You canorder matching 3-in-1 indicators directly below the descriptionas part of a set witha 10% discount. Additional accessories (optional) You can order the following parts as part of a set directly below the description: Wiring harness (highly recommended)We strongly recommend this. Without the cable set, the original Triumph central plug would have to be cut off and everything wired individually.When you buy the set, you’ll receivea 30% discounton the cable set. Number plate screw setFor a neat finish, you can attach your number plate using colour-matched screws. ReflectorTo ensure yourrear endis100% road-legal, a reflector must be fitted beneath the number plate.

€209.00*

Headlight Grill Alcatraz CB12183M.3 / RS-1

Model: Scrambler 1200 XC / XE

The Alcatraz grille is a precise lamp grille made in Germany that looks very solid & high quality and also protects your headlight from rough stone chips. In reference to the famous American prison Alcatraz, the lamp grid reminds of massive bars. The completely made of aluminum grid is lasered in many individual parts & then welded by hand. Through the protruding individual struts, the grid gets a 3D look and does not just sit flat in front of the lamp, as is the case with most other grids. The lamp grid is available in either black powder coated or silver glass bead blasted (this is a really classy, matte aluminum surface).The scope of delivery includes all screws & sleeves that are needed for mounting.

€119.00*

Lamp grille Alcatraz - Clip on CB12651 / RS-1

Model: Scrambler 1200

Alcatraz clip-on lamp grille - attached to and removed from the headlight with a single click/handle.The practical thing about the clip-on lamp grille is that it can be fitted within a second. The grille is simply clipped over the original headlight ring and then holds firmly in place. If you want to remove it, simply pull it off with a little force. This is also particularly practical when cleaning the motorbike, because you can simply remove the grille to clean the headlight lens. The struts of the Alcatraz grille have the same lines as the LED unit of the Triumph headlight and the Triumph bulb in the centre (see pictures). However, the grille also fits and looks good on the halogen headlights of the first Bobber series. Visually, the grille enhances the original headlight of your Bobber and skilfully creates a highlight on the motorbike. The clip-on Alcatraz lamp grilles.They are manufactured from high-quality, carbon fibre-reinforced plastic using a state-of-the-art 3D printing process. The surface is then smoothed and the grilles are painted in a black satin finish.This results in a very attractive and high-quality surface.

€119.95*