Rear Fender – Alps Edition – Scrambler 1200

€500.00*

Colour

item number:	C-4006
Shop-number:	CB12910

Product information "Rear Fender – Alps Edition – Scrambler 1200"

CROOKED rear mudguard including LED rear light and indicators for Triumph Scrambler 1200 models

The German company CROOKED reinterprets the look of the Scrambler 1200 with a retro design.
Their ‘Alps Edition’ product range gives the Scrambler a very classic off-road scrambler look.
Below the product description, you’ll find further parts from the Alps series listed under the accessories section to complete the look.

PLEASE NOTE: NOT COMPATIBLE WITH THE SCRAMBLER 1200 X

Short rear mudguard for the Scrambler 1200 with integrated lighting

The short Crooked fender for the Scrambler 1200 significantly changes the look of the rear end!
The original mudguard with its chunky rear light isn’t exactly a thing of beauty.
But for anyone who still wants a small mudguard on their bike, this is the perfect solution!
Housings for the LED indicators and an LED rear light are integrated directly into the fender.

Number plate holder (not included)

A number plate holderisnotincluded with the mudguard.
Below the description, you’ll find suitable accessory mounts – either a classic central mount or a side mount.

Plug & Play installation

The mudguard can be fitted to your Scrambler using the Plug & Play method –no modifications required.
All necessary fitting hardware is included in the delivery.

The cables for the rear light and indicators are already fitted with the correct connectors – simply plug them into the original wiring loom, and you’re done.

Triumph LC ab 2016	Scrambler 1200 XC / X EU 4 Scrambler 1200 XC / X EU 5 Scrambler 1200 XE EU 4 Scrambler 1200 XE EU 5 Scrambler 1200 XE EU 5+

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Accessories

Licence plate holder - Alps Edition rear - Scrambler 1200 CB12911 / RS

Central licence plate holder - suitable for rear fender "Alps Edition" Triumph Scrambler 1200 This aluminium licence plate holder has been specially designed for the Alps Edition rear and can be plug & play mounted directlyon the fender. The LED licence plate illumination is already integrated - including a suitable plug for direct connection to the original wiring harness of your Scrambler.

€105.00*

Side license plate holder - Vario CB12559 / RS-1

The side Classicbike-Raisch Vario license plate holder for the Triumph Scrambler 1200 models has a sophisticated mounting system, which makes it possible that the license plate holder on the one hand looks good and does not protrude too far to the outside and is legal and registrable. Through various mounting holes, it is possible to set the license plate far to the outside. This then allows a registration with your TÜV inspector of confidence.Side license plate holders do not necessarily need an ABE, to register them they must only comply with the StvO guidelines, which is given with our Vario holder, if the license plate is mounted at the outermost position. After registration, the license plate can then be placed further inwards for a nicer look. The product pictures illustrate the adjustment range of the license plate. Please clarify in advance with your TÜV inspector whether he will register the license plate holder (if necessary, we can provide a sample registration). The license plate carrier has a dimension of: Height = 100mm / Width = 155mm - The dimension is small enough to accommodate all motorcycle license plates in the world. Included in delivery: - Side license plate holder - Mounting material + cable for the license plate light - LED license plate light- Detailed step by step mounting instructions Classicbike-Raisch Tip: If you want to mount your license plate as unobtrusively and coherently as possible, we recommend ordering a set of license plate screws (you can find them under the accessories in this description).

€119.95*

Front Fender - Alps Edition - Scrambler 1200 CB12906 / RS10

Crooked "Alpes Edition" front mudguard for Triumph Scrambler 1200 models The German company CROOKED reinterprets the look of the Scrambler 1200.Their "Alps Edition" product line gives the Scrambler a very classic Scrambler off-road look.Below the product description, you will find further parts from the Alps series under accessories to round off the look. Scrambler 1200 Offroad front mudguard The high-quality front mudguard is made from very sturdy plastic. It also comes with a black mudguard mount milled from aluminium.In combination, this ensures that the mudguard is beautifully light and yet very stable. TechnologyThe integrated air duct in the mudguard supplies the 1200cc engine & radiator of the Scrambler with more air.This ensures that the engine stays a little cooler. Thanks to the design of the mudguard, it provides even better protection against water and mud when used off-road or in wet conditions. Plug & PlayThe mudguard is supplied with all the necessary installation materials and can be fitted in just a few simple steps. The mudguard is supplied in either white or black plastic (not painted) Classicbike-Raisch design recommendationFor the right off-road scrambler look, we recommend that you remove the lower mudguard from your scrambler. New fork protectors are required to do this.You can find suitable aluminium mudguards in the accessories section under the description.

From €210.00*

Details

Lamp mask - Alps Edition - Scrambler 1200 CB12907 / RS2

Crookes lamp fairing "Alpes Edition" for Triumph Scrambler 1200 The German company CROOKED reinterprets the look of the Scrambler 1200.Their "Alps Edition" product line gives the Scrambler a very classic Scrambler off-road look.Below the product description, you will find further parts from the Alps series under accessories to round off the look. Scrambler 1200 lamp mask including LED indicators The Crooked front fairing for your Scrambler gives the bike a really nice vintage look.Striking design reminiscent of off-road enduro machines from the 70s/80s.The front area is perfectly rounded off with the matching Alps Edition front mudguard. The original speedometer (which is not particularly attractive from the rear) is skilfully concealed by the fairing. The small LED indicators integrated into the mask round off the whole design. They are beautifully inconspicuous and look like a design element on the mask. Wind protectionOf course, the fairing also offers you technical added value.At higher speeds, the light mask noticeably relieves pressure from the chest. Plug & Play The lamp mask is quickly fitted over the original headlight and attached to the original indicator mounts. The new LED indicators can simply be plugged into the wiring harness. The lamp mask is available in either RAW (unpainted), black or white.

From €390.00*