Thruxton 1200 King & Queen Slim Seat Vintage

€199.00*

€89.99*

€659.95*

Available, delivery time: 1-3 days

item number:	211257594.2
Shop-number:	CB12234M

Product information "Thruxton 1200 King & Queen Slim Seat Vintage"

Classicbike-Raisch King & Queen Slim Seat Vintage for your Thruxton 1200

Exclusive Classicbike-Raisch Slim Seat in the King & Queen Slim Seat version for two-up riding, upholstered in brown genuine leather. The Thruxton 1200 has a beautiful rear subframe with a rounded arch – but you can’t see a thing of it! It’s a real shame. So we’ve made it our mission to build a slim and short seat that fully exposes the Thruxton’s rear frame. The result is a sleeker silhouette and a rear end that’s second to none – especially when combined with the HeckWeck Kit (see accessories section in this description). Pictures speak louder than words here.

Genuine leather – limitededition

Upholstered in the finest brown genuine leather. The leather has a beautiful grain that looks slightly worn right from the start. Over time, the leather develops an incredibly beautiful patina!
If you find the leather isn’t dark enough (in real life it’s a touch darker than in the photos), you can simply rub some dark leather grease over it.
The seat is only available in a limited number of units with this leather (whilst stocks last).

Out and about as a pair

The Thruxton comes fitted with a single-seater bench as standard. If you fancy a ride with a passenger, you’ll need a second seat – the King & Queen version lets you ride with a passenger.

Handcrafted in Germany

The seats are produced in small batches and entirely by hand here in Germany.
The upholstery consists of various high-quality foams (sandwich construction) to offer the highest possible level of seating comfort.
The seat base is made from extremely high-quality, rigid plastic. This allows the base to be kept very thin – the bench is nice and flat, not unnecessarily heavy, yet completely stable.

Assembly

Due to the very narrow seat base plate, the original mounting eyelets in the centre of the frame must be cut off (see the last product photos). Even without these eyelets, the original seat can still be fitted as normal, without any wobbling or other issues. We recommend touching up the cut edge of the frame with black paint to prevent rust.

Classicbike-Raisch Comfort Tip

We’ve all been there – on long rides, we all end up with a sore bum at some point. That’s why we stock the SW-Motech Comfort Seat Cushion. The cushion consists of lots of individual air chambers and is simply secured to the seat with two straps. You can use a valve to adjust how firm or soft you want your seat to be.
This cushion virtually solves the problem (I speak from personal experience – I spend two weeks every year on my bike from morning till night).
It’s also suitable for everyday use, for anyone who wants maximum comfort on their bike.
You’ll find the cushion below this description amongst the accessories.

Triumph LC models from 2016:	Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS

Triumph LC ab 2016	Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS / FE

-1

Accessories

HeckWeck Kit - Thruxton 1200 CB10948M / RS-1

Classicbike-Raisch Heck-Weck Kit for Thruxton 1200 - R - RS - TFC.Made in Germany The rear of a CafeRacer should look this clean and tidy. Precisely manufactured in-house from aluminium and black powder-coated. Indicator holders: These must be ordered separately. You will find two different indicator holders below the description.Vario indicator holder: The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).This version is legal & StvO compliant. Indicator holder strut:The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far into the rear). The rear lower fairing (lower shell) provides good splash protection. LED licence plate lighting with E-number is also included in the scope of delivery. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included in the scope of delivery.The licence plate holder is small enough to accommodate any motorbike licence plate available in the world and is completely concealed. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal. Even inexperienced mechanics can easily convert them (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu. If you don't have the confidence to do the wiring for the lights yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators). If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators). We also recommend ordering our licence plate screw set so that you can mount the licence plate nicely (accessory item HeckWeck Kit / LC under the 3-1 indicators).

From €199.00*

Details

SW-Motech Comfort Seat Cushion CB11977M / RS5

The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours. Relief for back and buttocks Prevents numbness and painful pressure points Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs Especially high vibration damping Integrated valve allows variable air filling Two sturdy straps with ROK straps and anti-slip underside for precise positioning Theft protection by fixing under the seat Surface made of robust, bi-elastic artificial leather for special seating comfort Waterproof interior: Air cushion made of polyurethane dimensions: Small: 22,0 x 30,0 cm Medium: 30,5 x 30,0 cm Large: 33,5 x 38,0 cm

From €89.99*

Details

Thruxton 1200 King & Queen Slim Seat Vintage

Product information "Thruxton 1200 King & Queen Slim Seat Vintage"

Classicbike-Raisch King & Queen Slim Seat Vintage for your Thruxton 1200

Stellen Sie eine Frage