Mirror Mounting + Widening Valves without thread LC
€22.95*
Pick your accessory
from €79.95*
from €99.00*
from €129.00*
from €129.00*
from €99.00*
from €36.95*
from €89.95*
| Product number: | CB11759 |
| item number: | 305-130.LC |
Product information "Mirror Mounting + Widening Valves without thread LC"
Mirror adapter for mounting accessory mirrors to Bonneville T100 & T120, Bobber & Speedmaster. These models do not have a conventional mirror thread in the fittings, but only a hole, therefore an additional adapter is required for mounting accessory mirrors.
This adapter is attached to the mirror hole in the fitting with the screw + nut supplied. In the adapter is then a conventional M10 thread, with which almost all accessory mirrors can be mounted.
In addition, the adapter is also a widening for the mirror holder by 40mm. This is also necessary for the fittings of the Bonneville, Bobber & Speedmaster, because the bore is very far inside and the original mirror has a very long arm.
If you install an accessory mirror simply in the place of the original mirror (without widening) you see virtually nothing to the rear.
| Triumph LC models from 2016: |
|
|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Speedmaster EU 4
Speedmaster EU 5
|
|---|
0
0
0
0
There aren't any asked questions yet.
Zubehörartikel
Gonia Mirrir silver & black
CB00565M
/ RS600
€79.95*
Mirror Gonia in silver or black. Beautiful mirrors and still big enough for the German road traffic regulations. Milled from the solid. Absolute top quality. After the legendary mirrors "Strada" from Road Racing Italy no longer exists, finally an equal replacement. And even cheaper. Right and left is different, so please specify the page.
Some model-specific adapters are required for assembly (see accessories in this description).
Motogadget M.View Club Mirror
CB11631M
/ RS0
From
€99.00*
Motogadget M.View Club mirror (street legal!) in a classic oval design. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsWidth of mirror body: 114 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm
The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Race Mirror
CB11678M
/ RS0
From
€129.00*
Motogadget M.View Race mirror (street legal with ECE!) in an angular design for all who like it sporty towards racers, as the name already says. Suitable for any normal mirror mount with thread. In the scope of supply different threads are contained (1x screw M10x1,5, 1x screw M10x1,25 right thread, 1x screw M10x1,25 left thread), in order to be able to mount the mirror also at each Bike, which has a mirror thread.These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design that is unparalleled on the market, but will not be found!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without a mirror thread (like e.g. a Triumph Bonneville T100), you will find suitable adapters for your motorcycle in the category "Mirrors: Accessories, holders & adapters". If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This makes it possible to mount the mirrors on the handlebars both upwards and downwards.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).
DimensionsWidth of mirror body: 129 mmHeight of mirror body: 80 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: 150 mmWeight: 175 gThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE mark. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Sport Mirror
CB11630M
/ RS0
From
€129.00*
Motogadget M.View Sport mirror (street legal!) in a sporty angular design, as the name already says. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles, the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the play arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsWidth of mirror body: 122 mmHeight of mirror body: 83 mmThickness of mirror body without ball head: 4,5 mmMirror arm length: standard: 150 mm / XL: 180mm
The size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Motogadget M.View Classic Mirror
CB11632M
/ RS0
From
€99.00*
Motogadget M.View Classic Mirror (street legal!) i classic round design paired with latest and most modern technology. Suitable for any normal mirror mount with thread. Included in delivery are different threads (1 x screw M10 x 1.5, 1 x screw M10 x 1.25 right-hand thread, 1 x screw M10 x 1.25 left-hand thread) to mount the mirror on any bike that has a mirror thread.
The mirrors are available in 2 different variants. There is the standard and the XL variant. These differ only in the length of the mirror arm. Visually, of course, the shorter arm looks better, but on some motorcycles the mirror mount sits so far inside on the fittings that you have with the standard version no good view to the rear.Dimensions of the game arms you see below in the details and on a photo.
These new and beautiful Motogadget mirrors have a completely new mirror technology! They do completely without mirror glass. The special feature of this mirror is the patented mirror surface, which is worked directly on the metal of the body. The aluminium itself is the mirror surface! Thus a weightless design without edge and frame is possible and the mirror body itself becomes extremely thin and light. Glass breakage or fallen out glasses are simply not possible! A new mirror design on the market of its equal seeks but will not find!These mirrors are really an absolute highlight on every motorcycle!For all motorcycles without mirror thread (such as a Triumph Bonneville T100), you will find in the category "Mirrors: Accessories, holders & adapters" suitable adapters for your motorcycle. If you don't have any mirror mounts at all (because there are none or you just want a clean handlebar), we recommend to order the Motogadget M.View Bar Clamp (see accessories in this description). This allows you to mount the mirrors up and down on the handlebars.
Mounting Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200, Air-cooled Triumph models with 1 inch handlebars:These models do not have a mirror thread from the factory, but simply a hole in the armature. Thus it is not possible to install an accessory mirror, as these always need a thread.We therefore offer a screw kit that allows the Motogadget mirrors to be mounted directly on the armature (the kit can be found under the accessories items in this description).In addition, we recommend that you choose the XL mirror variant for these models, since the mirror hole in the dashboard is located quite far inside and you do not have a perfect view to the rear with the short mirror.
DimensionsDiameter of mirror body: 96 mmThickness of mirror body without ball head: 4,2 mmMirror arm length: 150 mmThe size of the mirror surface of the m.view sport corresponds to the StVZO and it has an ECE marking. Therefore it is suitable for all vehicles without registration.Price per piece.
Oval mirror black & chrome
CB10686M
/ RS600
From
€36.95*
Oval mirror in chrome or in black. Completely made of metal. Optically the right size. Without E number. The respect is good and practical. With adjustable handle for accurate alignment. For twins with 1 handlebars, our mirror adapter is needed.
Assembly Note Bonneville LC, Bobber, Speedmaster, Scrambler 1200:These models do not have a mirror thread ex works, but simply a hole in the fitting. Furthermore, this hole is very far inside, which means that when mounting accessory mirrors without a widening, you can hardly see anything to the rear. Therefore the article "Mirror mounting + widening fittings without thread LC" (see accessories in this description) must be ordered in addition for the assembly & for the better view.
Classic mirror silver & black
CB00566M
/ RS600
€89.95*
Our friends from LSL have built a beautiful classic mirror that fits perfectly to our bikes. CNC milled with a wonderful surface. Right and left is different, so please specify the page. Available in black or silver. WITH TÜV.
Some model-specific adapters are required for assembly (see accessories in this description).