Motoscope Chronoclassic 2 Plug & Play speedometer kit for BMW R nineT Euro 4 & 5 models (year of construction 2016 - 2023) The CAN bus interface of the motoscope Chronoclassic enables the complete mapping of all original functions (except heated grip setting). The original connector to the wiring harness makes the instrument a real plug & ride solution. The conversion is very simple and only takes about 10 minutes. The scope of delivery includes a black aluminum mounting plate for plug & play installation of the speedometer on the original triple clamp. At last there is a really nice speedometer plug & play solution for the BMW R nineT. The elegant Chronoclassic 2 speedometer is probably the highest quality motorcycle speedometer available on the market. The speedometer has a complete metal housing and is manufactured entirely by Motogadget in Germany.The classic round design (80mm diameter) paired with the flat housing (22mm depth) give the speedometer the perfect overall appearance.     When switched off, a closed, black dial ensures the perfect look: modern, minimalist and timelessly classic at the same time. The digital display, a motogadget in-house development, consists of a matrix of 512 tiny, super-bright red LEDs and shines through the dial. Perfectly readable in direct sunlight, the display has two lines. The top line shows the gear and speed and the bottom line shows display values that can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlighting and automatic brightness adjustment of the matrix LEDs ensure optimum readability even in dark surroundings. 11 indicator lights are invisible when switched off and shine through the dial.   The following functions are possible on BMW R9T 2017-2023 with the motoscope pro and the motoscope Chronoclassic 2: Operation with the original handlebar buttons Setting and displaying the heated grip levelsSetting and displaying the riding modesSpeed (kmh/mph)Odometer (km/mi)Trip A (km/mi)Trip B (km/mi)Speed display as bar and numberGear shift flash (adjustable)Acceleration (g)Time measurement 0-100 kmh or 0-60mph (s)On-board voltage (V)Travel time (hh:mm:ss)Operating hours counter (h)Average speed (kmh/mph)Maximum values RPM, acceleration, speedGear indicator Reserve (indicator light)ABS (indicator light)Oil pressure switch (indicator light)Neutral (indicator light)Left/right blinker (indicator light)High beam (indicator light)What is not displayed: Activate & deactivate alarm systemFlashing light of the alarm systemImmobilizerOperating the cruise controlTime of dayOil pressure / oil temperature

Motoscope pro Plug & Play speedometer kit for BMW R nineT Euro 3 - 4 & 5 models. The CAN bus interface of the motoscope pro enables the complete mapping of all original functions (except heated grip setting). The original connector to the wiring harness makes the instrument a real plug & ride solution. The conversion is very simple and only takes about 10 minutes. The speedometer version for the Euro 4 R nineT models comes with a retaining plate. The Euro 3 version does not include a mounting plate, which must be ordered separately. We also offer a short mounting plate as an option, which is particularly useful for models with a stubby handlebar (both plates can be found under accessories in this description). It really makes the motorcycle look much more delicate.   The Motogadget Pro speedometer offers the following range of functions on the R9T models: Operation with the original handlebar buttons Setting and displaying the heated grip levelsSetting and displaying the riding modesSpeed (kmh/mph)Odometer (km/mi)Trip A (km/mi)Trip B (km/mi)Speed display as bar and numberShift flash (adjustable)Acceleration (g)Time measurement 0-100 kmh or 0-60mph (s)On-board voltage (V)Travel time (hh:mm:ss)Operating hours counter (h)Average speed (kmh/mph)Maximum values RPM, acceleration, speedReserveABSOil pressureGear indicatorNeutralLeft/right blinkerHigh beamWhat is not displayed: Activating & deactivating the alarm systemOperating the cruise control

This Koso LCD speedometer gives the cockpit of your BMW R nineT a new somewhat modern look. Especially nice it looks when the motorcycle is off, because then the speedometer only looks like a black disc, which is very Edel wirk. The speedometer instrument is a plug & play solution, which is simply connected to the original vehicle plug. There are no further electronics work / resistors set or similar necessary. Who has installed on his machine a double instrument or the oval original instrument of the Euro 3 R nineT, which needs an additional speedometer holder set (see accessories article in this description).   The following functions are offered by the KOSO instrument: Speedometer:Display unit: 0 - 360 km/h (0-225 MPH) switchable.Display unit: 1 km/h (MPH) Total odometer:Display indication: 0 - 99.999 km (mile)display unit: 1 km (mile) Trip odometer:Display unit: 0 - 9,999.9 km (mile)Display unit: 0.1 km (mile) Tripmeter O, range until oil change:Display indication: 0 - 9,999.9 km (mile)Display unit: 0.1 km (mile) Tripmeter A, range until service:Display indication: 0 - 9,999.9 km (mile)Display unit: 0.1 km (mile) Oil change interval:Setting range: 3,000 - 16,000 km (300 - 10,000 mile).Setting unit: 100 km (mile) Gear indicator:Display indication: N, 1 - 6 Maximum speed warning:Setting range: 30 - 360 km/h (18 - 225 MPH).Setting unit: 1 km/h (MPH) Tachometer:Display indication: 0 - 10,000 RPM / 0 -15,000 RPM Tach warning light:Setting range: 5,000 - 15,900 RPMSetting unit: 100 RPM Temperature:Display reading: 32 - 482°F (0 - 250°C). Temperature Warning:Setting range: 60 - 250°C (140 - 482°F).Setting unit: 1°C (1°F) Voltmeter:Display indication: 8.0 - 18.0 V Low voltage warning:Setting range: 8.0 V - 12.5 VSetting unit: 0.1 V Operating hours counter:Display unit: 0.0 - 9999.9 hoursDisplay unit: 0.1 hours (6 minutes) Hour counter 1 - 2:Display indication: 0.0 - 9999.9 hoursDisplay unit: 0.1 hours (6 minutes) Low oil level indicator A:Display indication: 0.0 - 9999.9 hoursDisplay unit: 0.1 hours (6 minutes) Recording of maximum values:Highest speedDisplay unit: 0 - 360 km/h (0 - 225 MPH) Highest speedDisplay unit: 0 - 15,000 RPM Highest TemperatureDisplay indication: 0 - 250°C (32 - 482°F) Highest VoltageDisplay indication: 8.0 - 18 V Highest gear Display indication: N / 1 - 6 Clock:Setting range: 12/24 hour system Background brightness:Setting range: 1-5 (darkest) - 5-5 (brightest) Voltage:DC 12 V Temperature range:-10 - +60°C Specifications:JIS D 0203(S2) Size:Diameter 96 mm Weight:Circa 194.5 g Warning lights:Turn signal (green)Engine control light (yellow)High beam (blue)Neutral (green)Warning light (red)ABS (yellow)Speed flash (red)

KRT Framework speedometer bracket made of aluminum was specially developed to position your speedometer a little lower and closer to the vehicle. Suitable for all BMW R nineT models from Euro 4 / year of construction 2017 This particularly contributes to the aesthetic side view of the RnineT, especially if you use a smaller or flatter headlight such as our LED headlight kit. This adjustment makes the speedometer less obtrusive, while it remains easy to read from the rider's perspective. Although it is only a small detail, we see it as a subtle nuance that rounds off the overall look. The bracket is made of aluminum, folded, then slide-ground and finished with a satin black powder coating. The speedometer down kit is also ideal for anyone who wants to convert their R nineT from a dual to a single speedometer. The original rubbers are still used to mount the speedometer on rubber bearings as in the original. This not only provides a stable mount, but also protects the electronics in the speedometer from vibrations. Fitting the bracket is uncomplicated and time-saving. No additional cable routing or shortening is required, as we have made sure that everything can be fitted plug & play.

Aluminium speedo cover for the TFT speedo of the BMW R12 & R12 nineT from AC Schnitzer.   This high-quality CNC-milled aluminium cover skilfully upgrades the original TFT speedometer of your BMW R12. The original speedometer display and the size itself are already very nice from the factory.  The plastic cover on the back, on the other hand, is very simple and looks cheap.  With the cover from AC Schnitzer, this is a thing of the past. The cover replaces the original plastic cap and sets skilful accents with its milled areas.    Installation is very simple and quick.

Mounting plate MSC-A Black or silver. 2 cylinders

Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

Vintage Cup: Beautiful copper outer cup for mounting between the handlebars. The eyecatcher par excellence. Fits for Motoscope mst. Vintage. Available with mounting bracket for 22mm handlebars or 1 handlebars.

Motosign mini black control lamps

Motogadget MSM Bracket bracket c Black

Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)

Stainless steel button to set the speedometer menu.This button can be used e.g. simply integrate it into the retaining plate of the speedometer and can then jump around in the menu of the speedometer and adjust everything.

The perfect speedometer holder for all who want to use the Motogadget Motoscope speedometer in combination with the JVB lamp mask. See photo

The matching speedo bracket for Motogadget speedometer to the speedometer really nice to get close to the motorcycle to have a beautiful line. Optimal use with stub, but also with handlebar quite possible. Then you can see the speedometer not 100%, but you have to bend a little bit before. But how to say so beautiful: who wants to be beautiful must suffer, if only a bit in the case.

Holder BMW R9T Motogadget Tacho. The instrument holder is suitable for the motoscope pro BMW R9T. It is milled from aluminum and then black anodized.

The msc Streamline-Cup for 1 inch handlebars is suitable for the assembly of all Classic instruments. Elaborately turned from the solid / milled and highly polished Streamline Cup. Stable attachment with handlebar clamp to 1 inch / inch handlebars. A real eye-catcher for every custom bike.

The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.