Drilling template handlebar 22mm / 1 inch
| item number: | 10401515 |
| Shop-number: | CB11954 |
Product information "Drilling template handlebar 22mm / 1 inch"
Handlebar drilling template for the armature lock
When fitting a new handlebar or stub on all Triumph models with standard 22mm or FatBar (inside thick outside 22mm) handlebars, it is necessary to drill two holes in the new handlebar. The original fittings are then locked over these.
On the water-cooled Triumph models from 2016 onwards, there is also a hole in the handlebars on the throttle grip side on models with 1-inch handlebars.
As it is not exactly easy to drill a hole in round material (such as a handlebar) and they also have to be exactly opposite each other, we offer this drilling template. This is simply placed around the handlebars and screwed in place. This makes it very easy to drill the two holes exactly opposite each other.
| Models Triumph AC until 2015: |
|
|---|---|
| Triumph LC models from 2016: |
|
| Triumph 400er |
Scrambler 400 X
Speed 400
|
|---|---|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Scrambler EFI
Scrambler Vergaser
Thruxton Vergaser
|
| Triumph LC ab 2016 |
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200 R
Thruxton 1200 RS / FE
|
600
600
600
600
There aren't any asked questions yet.
Skip product gallery
Accessories
Alu Handlebar Fat Bar
CB00258M
/ RS16
€89.95*
Fat bar handlebars, what does that mean? This means that the handlebar has a diameter of 28.6mm at the clamp and is then conical to the outside and only 22mm at the fittings. This makes the handlebar & the clamping area look less micrich. The fat handlebar makes the bike look much more mature and massive.The handlebar also offers a comfortable and particularly active riding position. Measurements: 760x70x155Since the original 22mm clamps are too small, new risers are needed (see accessories in this description).
Superbike FatBar SW, SI & Gold
CB11050M
/ RS20
€89.95*
LSL Superbike handlebars Fatbar Flat for crown 127T071. Measurements: 740x150x60
Sporttourer Black & Chrome steel
CB00175M
/ RS1
€69.95*
LSL handlebars Sporttourer-Clubmann steel handlebars in 1" or 22 mm diameter. The handlebar is 70 mm wide and 50 mm high.The right handlebar for all those who don't like to grab especially wide but want a more ergonomic & sporty grip position (nice front wheel oriented and active).The handlebars are delivered with TÜV parts certificate.The original handlebar end weights can no longer be used, because the ori. handlebar has a thread welded in and every accessory handlebar is hollow from the inside. Therefore, new ones are needed to have a clean handlebar end (see accessories in this description).
Streetbar handlebar LSL
CB00176M
/ RS-1
€59.95*
StreetBar handlebars in 1" or 22mm diameter.
This handlebar is quite straight and quite flat, which on the one hand ensures a front wheel orientated seating position and on the other hand, which is much more important, a really flat and cool look. The pictures say enough here I would say.
For model specific descriptions see below in the description.
Accessory handlebar end weights are required as the original ones no longer fit.
Dimensions: - 1": 85 cm wide x 6 cm high - 22mm: 82cm wide x 5.5cm high
Fat Bar Alu Handlebar LC
CB11852M
/ RS1
€89.95*
Fat bar handlebars, what does that mean? This means that the handlebars have a diameter of 28.6 mm at the clamp and then taper towards the outside and only measure 22 mm at the fittings. As a result, the handlebars and the clamping area no longer appear so small. The larger handlebars make the bike look much more grown-up and solid.
The handlebar is a very high quality LSL aluminum handlebar and has a beautiful matt blasted surface.
Street Twin / Speed Twin 900:This handlebar looks really good on the Street / Speed 900 and also ensures a very comfortable and attractive riding position. It is slightly higher and slightly wider than the original handlebars. This is exactly how handlebars should be on a motorcycle!As the original 22mm clamps are naturally too small, new risers are also required (see accessories in this description).In addition, the original brake line of the Street models is no longer long enough (we have an extension for this in our range, see accessories in this description). All other cables and wires are long enough.
Street Scrambler / Scrambler 900:Here too, the handlebars make a very good visual impression. The handlebars are slightly flatter and slightly narrower than the original. However, the handlebars are much nicer / more inconspicuously cranked and blend in better with the overall appearance of the Scrambler. The new handlebar clamp is not mandatory for this model. However, it can be fitted as an option for visual reasons.
Handlebar dimensions: 760x70x155mm
Rizoma Drag Bar Handelbar
CB11903M
/ RS0
€125.00*
The 755mm wide Drag Bar Alu handlebar from Rizoma is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The handlebars are really nice flat and straight handlebars, which primarily provides a very sporty and front wheel oriented seating position. Especially the hardly existing crank makes sure that you sit relatively far forward leaned.
In addition, the very straight handlebars give every bike a really nice flat line.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
Flat Track Handlebar
CB00223M
/ RS7
€69.95*
Flat Track handlebars in chrome or black. The absolutely classic shape. In our opinion, exactly the right size, as the original handlebars are simply too narrow for perfect handling. Other accessory handlebars in this style are either even wider or flatter again. Wonderful offset towards the rider, which ensures a very comfortable & cozy seating position.
Aluminum version: In the aluminium version, the handlebars are glass bead blasted and then anodized black. This gives the handlebars a very elegant surface and feel. They are slightly rough/matt and very deep black in the black version (and remain so even after many years). Only while stocks last.
Approx. dimensions: width 835 mm, height 110 mm. Throttle cable and cable are long enough. The brake cable is NOT long enough. A longer brake cable is required and must be ordered separately (see accessories in this description).
The original handlebar end weights can no longer be used, as the original handlebar has a welded-in thread and each accessory handlebar is hollow inside. New ones are therefore required to obtain a clean handlebar end (see accessories in this description).
With TÜV parts certificate
Sporttourer Handlebar Alu
CB00244M
/ RS4
€69.95*
LSL handlebars Sporttourer-Clubmann aluminium handlebars in 1" or 22 mm diameter. The handlebar is 70 mm wide and 50 mm high.The right handlebar for all those who don't like to grab especially wide but want a more ergonomic & sporty grip position (nice front wheel oriented and active).The handlebars are delivered with TÜV parts certificate.The original handlebar end weights can no longer be used, because the ori. handlebar has a thread welded in and every accessory handlebar is hollow from the inside. Therefore, new ones are needed to have a clean handlebar end (see accessories in this description).
Adventure handlebar - 805mm
CB12456M
/ RS1
€89.95*
The Adventure handlebar is just right for anyone who wants to have visually a really cool handlebar, but still wants to sit comfortably and fahraktiv. Visually, the handlebar comes very close to the Cross Bar or the Magura handlebars. The small but subtle difference lies in the cranking. Because the Adventure handlebar is not as straight as the other two handlebars, but a little more cranked to the driver (which gives you a more comfortable seating position). In addition, the handlebar is a bit higher. So the perfect compromise of appearance and functionality.
The handlebars provide a more front-wheel oriented seating position, which gives the rider more power over the front wheel and motorcycle.
ATTENTION: This handlebar is a FatBar handlebar. This means it is 28mm in the middle and 22mm on the outside. On all BMW R nineT motorcycles, the handlebar can be installed just like that (no lines or cables need to be changed).On most Triumph motorcycles, the handlebar clamp must be changed to 28mm. On Triumph models with 1" handlebars, the fittings will also need to be modified. If you have any questions about this, please feel free to contact us.
The handlebar is made of aluminum and comes with ABE. All cables and pulls are sufficient (speak the handlebars can be easily replaced. No longer fit the original handlebar end caps (here we would recommend to take the Rizoma handlebar end weights or convert to handlebar end turn signals. See accessories article in this description).
In both black and silver, the handlebar has a beautiful, matt bead-blasted surface.
Dimensions: Width: 805mm / Height: 77mm / Depth: 114mm / clamping range: 146mm / handlebar length: 220mm
Superbike Kit Thruxton 1200
CB11049.2M
/ RS1
€479.00*
Superbike triple tree kit for Triumph Thruxton 1200, R & RS. CNC milling technology at its best. The Super Bike Kit allows you to ride a classic tubular handlebar on your Thruxton 1200. This makes the Thruxton more active/agile to ride and also gives you a more upright/comfortable riding position.The Superbike triple clamp allows the use of a Fatbar handlebar with 28 mm (for Thruxton R). For the normal Thruxton with 1" clamping.The seating position changes as follows: The handlebars are approx. 9 cm higher / 6 cm wider than the original stubs of the Thruxton 1200.The scope of delivery includes a longer clutch line and a set of adapters so that the original handlebar end mirrors can still be used. Detailed fitting instructions are also included.The triple clamp is supplied with a TÜV parts certificate.
Many people think that a superbike handlebar spoils the look of the Thruxton, which is absolutely untrue (see photos). In the same way, you might think that you can just buy the Speed Twin, but it doesn't have the beautiful tank of the Thruxton (which makes a big difference visually).
Possible handlebars are: Thruxton R / RS : Streetbike Fat Bar handlebars - 0439Thruxton 1200: Superbike 1" handlebars Both handlebars can be found in the accessories section under this product description. Grip heater:The original Triumph grip heating cannot be used. If you still want to have heated grips, we recommend our Koso grips (see accessories in this description).
Sporttourer Black & Chrome
CB11134M
/ RS2
€59.95*
LSL handlebar Sporttourer Clubman 1", or 22 mm 70 cm wide, sporty cranked.
A very nice and sporty handlebar to ride. Perfect for those who like to sit front wheel oriented and do not want to grip so wide.
Tip for mounting on the Boneville T100 / T120: It is also a handlebar widening needed (see accessory items in the description). In addition, we recommend for all who want to sit on their Boneville something sporty yet our footrest system (see accessory article in this description).
Magura Mx Fat Bar
CB11578.1
/ RS0
€109.95*
Colour:
Black
The Magura Mx handlebar (suitable for all 22mm bikes) is the handlebar that gives the rider the most control and power over the bike and front wheel. A nice wide and almost straight handlebar that provides a very sporty but also comfortable sitting position.You have to like it in any case to grab wide when driving, otherwise this handlebar is not the right one for you!In addition, the handlebars give the bike a very cool look with its straight and little cranked line. It almost looks like a motocross or a supermoto.We can only warmly recommend this handlebar! We also drive on our own Scrambler conversion. Simply exactly the right one for everyone who likes to drive sporty and likes the look!Since this is a FatBar handlebar (i.e. at the clamp it has 28mm diameter and then runs conically to 22mm towards the fittings), a new clamp is needed (see accessories in this description).Our recommendation here is the 35mm clamp, so you have the perfect sitting position on the bike.All wires & cables are long enough and do not need to be replaced.
Dimensions handlebar (see photo): a: 808mm b: 135mm c: 189mm f1: 120mm h: 63mm
Superbike Lenker Alu
CB00195M
/ RS14
€59.95*
Superbike counters 22 mm made of aluminum 760 mm wide. Colors: Silver, Black. Extremely high strength, flexible and light alloy. Titanium, gold and other questions on request handlebars weight recommendation
M - Handlebar
CB00206M
/ RS10
€89.00*
M handlebars available in 1" or 22 mm diameter in black & chrome. More classic than an M handlebar is no longer possible. Fits without further ado (speak all lines and cables are long enough and nothing must be replaced.
The original handlebar end weights can not be used further, because the ori. handlebar has a thread welded in and each accessory handlebar is hollow inside. Therefore new ones are needed to have a clean handlebar end (see accessory products in this description).
With no objection certificate for the TÜV.
Dimensions:1 inch: a 694mm / b 105mm / c 162mm / d 134mm / e 300mm
22mm: a 575mm / b 104mm / c 150mm / d 67mm / e230mm
Rizoma Taperet Handelbar
CB11905M
/ RS0
€123.00*
The Rizoma Taperet aluminum handlebar is a "Fat Bar" handlebar, meaning it is in the 29mm and goes down to 22mm on the outside. The Taperet handlebar is a classic Super Bike All Rounder handlebar. The handlebar is available in 3 different versions (different dimensions and offset). See the technical drawings in the fots.
If you don't have a fat bar clamp (but only a narrow 22mm clamp) on your bike ex works, you can order a suitable clamp from our program.You can also order the Rizoma Riser AZ402B or AZ 403B for the Triumph Speed Twin to get the handlebar A a little bit higher B to get a more beautiful and clean look.
The Taperet handlebars are just the right handlebars for everyone who is looking for a really good everyday handlebar for sporty riding, long tours and cruising.
As you are used to with all Rizoma products, the handlebars are also extremely high quality.The handlebars are blasted with glass beads and then anodized. This gives them a very high-quality, matt surface.
All Rizoma handlebars are delivered with ABE and can easily be registered with the TÜV.
Original handlebar end weights that are screwed into the original handlebars can not be used further. All accessory handlebars are hollow from the inside. Here handlebar end weights are needed, which spread out in the handlebar. We recommend the Rizoma Cap end weights (see accessories in this description) or handlebar end mirrors to the handlebars.
ATTENTION with the MA011 handlebar: This handlebar has a rather narrow clamping area and does not fit all motorcycles (such as on a Speed Twin). Please measure the required area beforehand and compare with the dimensions on the drawing.
BMW R12 nineT:The MA006 and MA011 Plug & Play versions are suitable for this model.
CrossBar Handlebar
CB00243M
/ RS3
€84.90*
An absolute must for every scrambler rebuild that should look like terrain! There's a center brace an absolute must!Cross handlebar 22mm: 790mm width. With parts certificate. All trains fit. Available in black & in chrome !Cross handlebar in 1": 900mm wide & 130mm high. All cables fit (except for the brake line, see accessories in this description for longer). Only available in black.The handlebars are delivered with TÜV parts certificate.The original handlebar end weights can no longer be used, because the ori. handlebar has a thread welded in and every accessory handlebar is hollow from the inside. Therefore, new ones are needed to have a clean handlebar end (see accessories in this description).Translated with www.DeepL.com/Translator