Sprocket Nuts Stainless Steel SW & SI
€32.95*
Available, delivery time: 1-3 days
Zubehörartikel
from €114.95*
from €134.95*
€99.95*
€119.95*
from €34.95*
from €34.95*
from €63.95*
| item number: | 211257538.SI.LC |
| Shop-number: | CB11580 |
Product information "Sprocket Nuts Stainless Steel SW & SI"
No more scruffy chain ball nuts. The black nuts are outside made of aluminium and have a stainless steel thread core, the silver nuts are completely made of stainless steel.
They can be simply pressed against the original steel nuts, which are not particularly beautiful from the surface.
Fits in black especially well to the chainrings we sell, because they are always black.
| Models Triumph AC until 2015: |
|
|---|---|
| Triumph LC models from 2016: |
|
| Triumph AC bis 2015 |
Bonneville SE Gussrad
Bonneville T100 EFI
Bonneville T100 Vergaser
Scrambler EFI
Scrambler Vergaser
Speedmaster / America
Thruxton 900 EFI
Thruxton Vergaser
|
|---|---|
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XC / X EU 5+
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Scrambler 1200 XE EU 5+
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speed Twin 1200 EU 5 +
Speed Twin 1200 RS
Speedmaster EU 4
Speedmaster EU 5
Speedmaster EU5 +
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Scrambler / Scrambler 900 EU5 +
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Street Twin / Speed Twin 900 EU5 +
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
|
600
600
600
600
There aren't any asked questions yet.
Skip product gallery
Zubehörartikel
Chain kit 1200cc engine - steel
CB11449M
/ RS-1
€114.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have installed a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 1200cc engine - steel copy
CB12876
/ RS-1
€134.95*
Complete chain set for all water-cooled Triumph models with 1200cc engines (525 chain) - steel colours.
See table below for standard motorbike ratios.Please note that not all gear ratios are possible or make sense. See special model descriptions below.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 525 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T120
37 teeth
17 teeth
Thruxton 1200
42 teeth
16 teeth
Thruxton 1200 R - RS / Speed Twin
42 teeth
16 teeth
Speed Twin
42 teeth
16 teeth
Bobber
37 teeth
17 teeth
Bobber Black 16"
37 teeth
17 teeth
Speedmaster 1200
37 teeth
17 teeth
Scrambler 1200 XC / XE
44 teeth
16 teeth
Bobber / Bobber Black / Speedmaster: Tip: The standard gear ratio of the Bobber / Speedmaster is clearly too long, so we recommend using a larger 40 or 42 chainring to shorten the gear ratio of the bike. This gives the bike a much more powerful bottom end, but still does not lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention: If you have fitted a side licence plate holder (e.g. the Wunderkind from our range), you will need a longer chain. If you choose a 42 mm chainring, you also need a longer chain.An even longer chain is required when using a side licence plate holder in conjunction with a 42 tooth chainring(therefore please select the appropriate model).
Bonneville T120:Tip: The standard gear ratio of the Bonneville T120 is clearly too long, so we recommend using a larger 40 or 42 tooth chainring to shorten the gear ratio of the bike. This makes the bike push harder at the bottom, but still doesn't lose any top speed and the constant jerking at low speeds becomes a little smoother.A larger chainring than 42 teeth is not provided in this kit for the Bobber. If you would still like to have this, please contact us and we will put together a customised kit for you.Attention:Triumph has changed the swingarm length of the Bonneville T120 over the years (the newer models have a slightly longer swingarm). So that we can pack you the right chain for the chain kit, you must select the correct model in the selection above. You can see how to check/determine which swingarm your Bonneville has in the product photos.
Thruxton 1200 / Speed Twin:Tip: In our opinion, the Thruxton & Speed Twin models have a pretty suitable gear ratio ex works. However, if you want to go even shorter, we recommend the 44 tooth chainring. For a slightly longer ratio, we would go for a 40 tooth chainring and / or a 17 tooth sprocket.
Scrambler 1200:Tip: In our opinion, the Scrambler 1200 models have a suitable gear ratio ex works. But if you want it even shorter, for even more punch off-road, we recommend the 46 tooth chainring. For a slightly longer ratio, we would go for a 42 tooth chainring and / or a 17 tooth sprocket.
About the Enuma chain: Enuma chain 525 MVXZ2, the absolute highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 900cc engine - steel
CB11452M
/ RS-1
€99.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - steel chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Chain kit 900cc engine - Gold
CB12877
/ RS-1
€119.95*
Complete chain set for all water-cooled Triumph Modern Classic models with 900cc engines (520 chain) - Golden chain
See table below for standard motorbike gear ratios.
ATTENTION: For Euro 5 vehicles, the control unit must be reprogrammed if the gear ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under accessories in this description).Please check beforehand in the Tune ECU programme whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Enuma 520 chain set
The kit includes a very high-quality Enuma chain, a chainring (either a black steel chainring or a stealth chainring in gold / black) and a chain sprocket.A little further down in the description, you have to add your desired sprockets to the set.A rivet lock is also included in the scope of delivery.
Tip:- To be on the safe side, we recommend ordering a new sprocket locking plate with the chain set (see accessories article in this description).- You will also find beautiful black chainring nuts in the accessories for those who want a completely black finish.- For easier assembly, we recommend ordering the Enuma screw lock as well
Standard gear ratio
Model
Chainring
Sprocket
Bonneville T100
41 teeth
17 teeth
StreetTwin
41 teeth
17 teeth
StreetScrambler
41 teeth
17 teeth
StreetCup
41 teeth
17 teeth
As the standard gear ratio is too long, we recommend using the larger 44 chainring and reducing the bike's gear ratio slightly. This gives the bike a much more powerful bottom end, but still doesn't sacrifice top speed.
About the Enuma chain: Enuma chain 525 MVXZ2, absolutely the highest quality chain on the market! There is cheaper, but nothing better. Thanks to the Quadra-X rings, this chain offers a significantly improved service life compared to the O-ring chains used by the motorbike manufacturer and the X-ring chains from other accessory manufacturers. They prevent the ingress of dirt and moisture in the best possible way and provide additional grease chambers.Caution! A screw lock must be ordered separately (see accessories). A rivet lock is included in the scope of delivery.
Sprocket 1200ccm
CB11187M
/ RS1
€34.95*
Chainring for 1200ccm engines with 525 chains 44, 42, 40 or 37 teeth.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
The original motorcycles have shorter gear ratios: Bonneville T120 37 teeth / Bobber 37 teeth (much too long gear ratio) / Thruxton 1200 & Speed Twin 42 teeth Motorcycle runs much better with the shorter gear ratio over the complete rev range (maximum speed is also not lost). And just below the bike it pushes again differently.In addition, the chainring is black and looks even better.An absolute recommendation from us!Attention at Bonneville T120: Triumph has changed the swingarm length of some models (Thruxton & Speed Twin NOT affected) over the years (new models have longer swingarms).Who has a longer swingarm can only use the 42 chainring in combination with a longer chain (this can be ordered from us on request). As an alternative to the 42er chainring you can also use a 16er sprocket 40er chainring, which results in almost the same transmission ratio as the 42er chainring.You can simply measure if you have installed the long or short swingarm on your motorcycle (see the product photos).Attention at Bobber & Speedmaster: If a side plate holder is installed on the motorcycle (e.g. from our program), then the original chain is only sufficient for the 40er chainring. If you still want the 42 chainring, you have to buy a longer chain from us. Is available on request.
Sprocket 900ccm
CB11451M
/ RS1
€34.95*
Chainring for Bonneville T100 StreetTwin, StreetCup & Street Scrambler 41 & 44 Teeth . For 900cc engines with 520er chain.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).Please check beforehand in the Tune ECU program whether it is possible to set your desired gear ratio (not every gear ratio is possible on all models)
Original have the bikes: a 41er chainring outside, which is clearly too long. With the conversion to a 44er chainring, the motorcycles have noticeably more pressure from below. The bike runs much better with the shorter gear ratio over the entire engine speed range (maximum speed is not lost).
In addition, the chainring is black and looks even better.
An absolute recommendation from us!
Sprocket Dual 1200cc engines
CB11567M
/ RS1
€63.95*
Dual sprocket with 42 teeth for all water-cooled Triumphs with 1200 cc engine.
ATTENTION: For Euro 5 vehicles, the ECU must be reprogrammed if the transmission ratio is changed. This requires the OBD Bluetotth adapter + the Tune ECU programme (the Bluetotth adapters can be found under the accessories in this description).
Standard gear ratio
Modell
Kettenblatt
Ritzel
Bonneville T120
37 Zähne
17 Zähne
Thruxton 1200
42 Zähne
16 Zähne
Thruxton 1200 R - RS / Speed Twin
42 Zähne
16 Zähne
Speed Twin
42 Zähne
16 Zähne
Bobber
37 Zähne
17 Zähne
Bobber Black 16"
37 Zähne
17 Zähne
Speedmaster 1200
37 Zähne
17 Zähne
Scrambler 1200 XC / XE
44 Zähne
16Zähne
Translation tips:
Models with 37 teeth: This gear ratio is clearly too short! With a shorter one, the acceleration, traction and top speed are increased. In addition, the motorcycle rides at 50-60 (city speed) much more relaxed, because the constant Fahrruckeln is significantly less.
Models with 42 teeth: This gear ratio is well chosen ex works. Who would like to have it still somewhat sportier, which can make itself the 44er on it.
Models with 44 teeth: Is an already quite sporty chosen, short transmission. Who wants to have it a little more suitable for long distances, we recommend the 42er chainring to install.
The dual sprockets are the highest quality and technically advanced sprockets in the world. The secret is based on the combination of the durability of steel and the lightness of aluminum. The outer rim of the sprocket is made of steel (to ensure long life), the inner one of aluminum (to save weight).The central parts are manufactured with high precision on CNC mills and are coated with a thick anodized film that prevents oxidation. Based on experience, Stealth sprockets last about three times longer than pure aluminum sprockets.
The steel sprockets for our Twins are at least 20% heavier than the Stealth chainrings (especially with rotating masses, every gram falls into the weight!).
In addition, there is the unique optics.