€0.00*

Monza Seat Thruxton 1200

Skip image gallery
HeckWeck Kit - Thruxton 1200
HeckWeck Kit - Thruxton 1200

€199.00*
SW-Motech Comfort Seat Cushion
SW-Motech Comfort Seat Cushion

€89.99*

€289.00*

% €389.00* 25.71%

Prices incl. VAT plus shipping costs

No longer available

Privacy
item number: TMRT553
Shop-number: CB12163.1

Product information "Monza Seat Thruxton 1200"

Tamarit Monza Seat – a narrow seat for your Thruxton 1200

The Tamarit Monza Seat is a really lovely, narrow and short seat that gives the rear of your Triumph a really sleek look.
The shape of the seat further emphasises the beautiful rear frame and its curved arch, as the seat runs directly over the frame, leaving it visible.
What’s more, the seat has a particularly clean and attractive transition to the fuel tank. The padding, which rises at the front of the tank, also gives you a bit more seating comfort: when braking hard, you no longer slide against the hard tank, but into the padding.


Materials & Workmanship

The seat is handcrafted in Spain. High-quality fibreglass is used for the base plate, and all Tamarit seats feature very high-quality upholstery foam to ensure the greatest possible seating comfort.
The cover is made from one of the finest synthetic leathers available (used in shipbuilding). It looks and feels almost like real leather, but has the advantage of being extremely easy to care for, and you won’t have any problems with a wet seat when it rains.
Dimensions: 73 x 25 x 12 cm

Assembly

Fitting is very simple: remove the original seat and fit the new one. The Monza Seat is secured and locked in exactly the same way as the original, using the key lock.

PLEASE NOTE: To fit the seat, it is essential to cut off the two retaining tabs on the left and right of the frame (see pictures).
Otherwise, it is not possible to fit such a beautifully slim seat. Even without the brackets, the original seat can be refitted very easily and securely – nothing wobbles or slips. We’ve already ridden thousands of kilometres like this on our own Thruxton. The security provided by the lock and the front of the fuel tank is more than sufficient.

Classicbike-Raisch tip

The seat looks particularly cool when combined with our HeckWeck Kits – this gives you a really short and clean rear end. You’ll find the kit below this description amongst the accessories.

Classicbike-Raisch Comfort Tip

We’ve all been there – on long rides, we all end up with a sore bum at some point. That’s why we stock the SW-Motech comfort seat cushion. The cushion consists of lots of individual air chambers and is simply secured to the seat with two straps. You can use a valve to adjust how firm or soft you want your seat to be.
This cushion virtually solves the problem (I speak from personal experience – I spend two weeks every year on my bike from morning till night).
It’s also suitable for everyday use, for anyone who wants maximum comfort on their bike.
You’ll find the cushion below this description amongst the accessories.

Triumph LC models from 2016:
  • Thruxton 1200
  • Thruxton 1200 R
  • Thruxton 1200 RS
Triumph LC ab 2016
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS / FE
0
0
0
0

Stellen Sie eine Frage

* gekennzeichnete Felder sind Pflichtfelder.

Accessories

HeckWeck Kit - Thruxton 1200
HeckWeck Kit - Thruxton 1200 CB10948M / RS-1
Classicbike-Raisch Heck-Weck Kit for Thruxton 1200 - R - RS - TFC.Made in Germany The rear of a CafeRacer should look this clean and tidy. Precisely manufactured in-house from aluminium and black powder-coated. Indicator holders: These must be ordered separately. You will find two different indicator holders below the description.Vario indicator holder: The indicators are attached directly to the licence plate with the Vario indicator holders (the width of the indicator holders can be adjusted so that every indicator sits in the perfect position for every licence plate width).This version is legal & StvO compliant. Indicator holder strut:The turn signals are mounted on the inside of the strut using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the motorbike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far into the rear). The rear lower fairing (lower shell) provides good splash protection. LED licence plate lighting with E-number is also included in the scope of delivery. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included in the scope of delivery.The licence plate holder is small enough to accommodate any motorbike licence plate available in the world and is completely concealed. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one indicator).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal. Even inexperienced mechanics can easily convert them (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu. If you don't have the confidence to do the wiring for the lights yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators). If you want to have it 100% correct for TÃœV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators). We also recommend ordering our licence plate screw set so that you can mount the licence plate nicely (accessory item HeckWeck Kit / LC under the 3-1 indicators).

From €199.00*
Details
SW-Motech Comfort Seat Cushion
SW-Motech Comfort Seat Cushion CB11977M / RS5
The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours.     Relief for back and buttocks     Prevents numbness and painful pressure points     Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs     Especially high vibration damping     Integrated valve allows variable air filling     Two sturdy straps with ROK straps and anti-slip underside for precise positioning     Theft protection by fixing under the seat     Surface made of robust, bi-elastic artificial leather for special seating comfort     Waterproof interior: Air cushion made of polyurethane dimensions:     Small: 22,0 x 30,0 cm     Medium: 30,5 x 30,0 cm     Large: 33,5 x 38,0 cm

From €89.99*
Details