Please choose your bike

Headlight Grill Alcatraz - R9T CB12595 / RS-1

The BMW R nineT Alcatraz lamp grille is a precision lamp grille manufactured in Germany that looks very solid and high-quality and also protects your headlights from rough stone chips. Based on the well-known American prison Alcatraz, the lamp grille is reminiscent of massive bars. Made entirely from aluminum, the grille is laser-cut in many individual parts and then welded by hand. The protruding individual struts give the grille a 3D look and it doesn't just sit flat in front of the lamp, as is the case with most other grilles. Visually, the grille enhances the original headlight of your R9T and skillfully creates a highlight on the motorcycle. Fitting the grille is very easy and can be completed within 1-2 minutes. Note on the Urban GS Racer: The grille only fits on the Urban if the original lamp mask has been removed.

€109.95*

Headlight Grill Alcatraz - BMW - LED CB12596 / RS-1

Alcatraz headlight grille for BMW R nineT & R12 motorcycles. The BMW R nineT Alcatraz LED headlight grille is a precisely manufactured headlight grille that looks very solid and high-quality on the one hand and also protects your headlight from stone chips on the other.The LED version of the Alcatraz grille is suitable for all BMW R nineT Euro 5 models that have the original LED headlights installed, as well as for BMW R12 models. The bars of the Alcatraz grille have the same lines as the LED insert of the R9T headlight insert. This would make the beautiful LED headlights even more impressive. Inspired by the famous American prison Alcatraz, the lamp grille is reminiscent of solid bars. The grille, made entirely of aluminum, is laser-cut into many individual parts and then welded by hand. The protruding individual struts give the grille a 3D look and it doesn't just sit flat in front of the lamp, as is the case with most other grilles. The grille visually enhances the original headlight of your BMW R nineT and skillfully sets a highlight on the motorcycle. Installing the grille is very easy and done within 1-2 minutes. Note on the Urban GS: The grille only fits on the Urban if the original lamp mask is removed.

€129.95*

Details

Radiator grille - R9T / R12 CB12388 / RS0

Classicbike-Raisch aluminum protective grille for the oil cooler of all BMW R nineT & R12 models.Made in Germany! The protective grille serves two purposes.First and foremost, it protects the radiator from rough stone chips, which is especially important if you are also a bit off road.In addition, the grille also looks visually nicer, and hints at the BMW logo.Due to the many slots, sufficient cooling is guaranteed. The grid is made of aluminum and is laser cut and edged by hand in our region. Subsequently, the Gitte is coated black powder.

€79.95*

Details

BMW R9T Skid Plate underride guard CB11643M / RS0

A motor protection belongs to every RnineT model. The cooling fins or the oil filter can be damaged by stone chips or when driving up and down the curb.The JvB-moto engine guard is pure minimalism - only as long and as wide as absolutely necessary!The course of the engine guard harmoniously follows the manifold line without hiding the manifold or the engine. Equipped with vibration dampers and an additional absorption mat made of rubber, the 4mm thick aluminium engine guard is ready to protect oil filters and cooling fins in the best possible way and in a material-friendly way. Avialable in silver or black.

€189.00*

Details

Sturzbügel Heavy Duty - BMW CB12395M / RS1

Unit Garage Motorschutz Bügel für alle BMW R9T Modelle ab BJ 2017 (Euro 4) sowie R12 Modelle (bitte in der Auswahl wählen). Die Heavy Duty Bügel sind etwas massiver als die meisten anderen Bügel. Durch eine zweite Strebe wird der Zylinderkopf noch mehr abgedeckt. Das bietet noch besseren Schutz und wirkt optisch noch etwas martialischer.Die Bügel werden aus 25mm Rohren hergestellt und schwarz Pulver beschichtet. Sie sehen also aus wie der Rahmen der R nineT. Besonders praktisch bei den Heavy Duty Bügel ist, dass sie für die meisten Servicearbeiten nicht demontiert werden müssen. Außerdem müssen zur Montage der Bügel nicht die Schrauben, die den Motor halten gelöst werden (was bei vielen anderen Herstellern so gelöst wurde, dass diese Schrauben gelöst werden müssen). Alle Montagematerialien sowie eine Montageanleitung sind im Lieferumfang enthalten.

€379.95*

Details

Rizoma Headlight grid CB11376 / RS3

Aluminum lamp grid for R9T Classic, Pure & Scrambler. In black anodized suitable for the original headlight.

€185.00*

Rizoma Headlight grid R9T Urban GS CB11377 / RS3

Aluminum lamp grid for R9T Urban GS. Sort for a nice rustic look. Why it belongs to an urban GS to terrain style. In black anodized suitable for the original headlight.

€254.00*

Cooler grid CB12273 / RS10

Aluminum lasered protective grille for the oil cooler of all BMW R nineT models from the brand Unit Garage from Italy. The protective grille serves two purposes.First and foremost, it protects the radiator from rough stone chips, which is especially important if you are also a bit off road.In addition, the grid also looks visually nicer than honeycomb structure of the original oil cooler. The grid is made of aluminum and anodized black.

€100.00*

Rizoma headlight protector CB11239 / RS50

Aluminum lamp grid for R9T Classic, Pure & Scrambler. In black anodized suitable for the original headlight. Not only protects the headlight, it provides an eye-catcher in the headlight area. Besodners suitable for a more rustic conversions!

€185.00*

Fork protector - R12 CB12726 / RS600

CNC-milled aluminum crash pads from Rizoma. Unfortunately, crashing your motorcycle is always an unpleasant topic. In the event of a crash, the fork and swingarm of the motorcycle are always the first to come into contact with the asphalt. To protect the fork in the event of a fall, we recommend fitting crash pads to the fork legs. As crash pads often do not look attractive, Rizoma offers the solution here. The Rizoma crash pad is so elegantly finished that it even enhances the appearance of the R12.

€179.00*

Engine guard - BMW R12 CB12720M / RS600

Unit Garage aluminum underride guard suitable for BMW R12 models. The underride guard is made of 3 mm thick aluminum and protects the motorcycle from stone chipping and contact when riding off-road. The stone guard is also an advantage when riding on the road. The use of 3 mm aluminum ensures good protection with low weight. The protection also gives the R12 a more solid appearance. The Unit Garage guard is designed to also cover the manifold and the catalytic converter. Everything needed for installation is included in the scope of delivery.

€249.95*

Details

Motor protection bracket R12 CB12703 / RS600

SW-MOTECH Engine Guard BMW R12 Cruiser / nineT The robust stainless steel bracket protects the engine and components from fall damage and scratches. A resilient frame connection ensures high stability, while the high-quality crash bar blends seamlessly into the design of the motorcycle. The use of blasted and electropolished stainless steel offers the advantage over coated steel that damage to the crash bar cannot lead to a loss of corrosion resistance. Reliable protection of critical componentsLoadable frame connectionBlack powder coatedMatching the appearance of the motorcycleScope of delivery: 2 safety guardsmounting materialmounting instructions

€270.00*

Injection bar protection CB12519M / RS600

A pair of aluminium covers for the injection nozzles for BMW R nineT models. The cover can protect the injection nozzle of your BMW R nineT from damage and is screwed onto the existing fastening points on the vehicle. Specially adapted to the shape of the boxer engine, the cover can also be installed in conjunction with the cylinder guard MSS.07.653.10000/S. Installation without the SW-MOTECH cylinder protector as well as with the milled original BMW valve covers is also possible.

€55.00*

Details

Handprotektoren-Kit BMW CB12186M / RS600

Die SW-Motech Handprotektoren-Kit schützt die Lenkerarmaturen deines Bikes bei Stürzen und deine Hände vor Witterungseinflüssen wie kalter Luft und Regen. Die Basis bildet ein stabiler Aluminiumbügel, an dem die Sport Handschalen befestigt sind. Der schlagfeste Kunststoff der Schalen ist flexibel und bietet besten Schutz vor äußeren Faktoren. Die schlanke Form und die mattschwarze Optik sorgen außerdem für ein stillvolles Designelement am Lenker.Genau das richtige für alle BMW Fahrer, die ihrem Motorrad einen leichten Off Road / Motocross Look verleihen wollen. Sehr praktisch sind Handguards für Fahrer, die bei Wind & Wetter fahren, sie haltne die Hände trockener und sorgen für Windschutz, damit die Hände nicht kalt werden. Es gibt die Handguards in zwei Ausführungen: Sport: Die etwas kleinere Schalen haben.Adventure: Größere Schalen wie bei einer klassichen Enduro. Stabiler geschlossener Aluminiumrahmen Zeitloses Design mit Handschalen aus schlagfestem Moplen-Kunststoff Großdimensionierte Handschalen bieten besten Schutz vor Witterungseinflüssen Einfache Montage der Handschalen an den Aluminiumbügeln, bei Bedarf austauschbar Lieferumfang 2 x BBSTORM Handprotektoren-Schalen, links und rechts 1 x Barkbusters Handprotektoren Montage-Kit, links und rechts Anbauanleitung Montagematerial

€160.00*

Details

Rizoma Brake / Clutch Lever Protector CB11907 / RS600

The patented Rizoma Proguard system is a very practical part of every motorcycle. In case of a fall (or if the motorcycle simply tips over or hits a wall) the Proguards protect the brake and/or clutch levers as well as the rider's fingers. The minimalist design of the protectors ensures that they do not attract any negative attention on the motorcycle. The protectors are manufactured in a very high quality known from Rizoma. Additional adapters are required to mount the system (mounting on all Triumph motorcycles is only possible with an accessory handlebar).For mounting on all accessory handlebars we offer the adapter "Rizoma handlebar-mirror adapter uni. LP200B is required.For mounting on the original handlebars of a BMW R9T the adapter "BMW R9T Adapter Weights + Mirror" LP321B is requiredFor adapters see accessories in this description. The price is for one protector

€125.00*

Carbon underrun protection CB11114 / RS600

Engine guard made of carbon (470g light). Adjusts R9T & Scrambler. With ABE

€499.90*

Crusher protection CB11007 / RS600

The SW-MOTECH motorcycle arch protection is designed as a supplement to the engine protection and secures the front manifold pipes against rockfall. At the same time, the robust stainless steel cover serves as heat protection. The universally applicable protector is available in two versions for tube diameters of 32-50 as well as 50-70 mm. By dividing into flexible segments, the covers can be easily adapted to the manifold shape. Depending on the number of pipes and the pipe diameter, the user can assemble the appropriate sheathing for almost every motorcycle model. particularities Protection against rockfall for the elbow pipes Heat protection for drivers and passers-by Universal fit for tube diameters of 32-50 mm Flexible segments allow simple adaptation to different pipe variants Ventilation openings for reliable ventilation Length: 30 cm Material: Stainless steel with brushed finish delivery Motorcycle anti-bend protection for pipe diameters of 32-50 mm Mounting material Installation instructions Note: The mounting kit is also available in a version for tube diameters of 50-70 mm Price is for one page.

€35.00*

Motor protection bracket R9T CB11008.1M / RS600

SW-MOTECH Engine Guard BMW R Nine T The robust stainless steel bracket protects the engine and components from fall damage and scratches. A resilient frame connection ensures high stability, while the high-quality crash bar blends seamlessly into the design of the motorcycle. The use of blasted and electropolished stainless steel offers the advantage over coated steel that damage to the crash bar cannot lead to a loss of corrosion resistance. Reliable protection of critical componentsLoadable frame connectionBlack powder coatedMatching the appearance of the motorcycleScope of delivery: 2 safety guardsmounting materialmounting instructions

€265.00*

Details

SW Motech Engine Protection - BMW R9T CB10983M / RS600

The SW-MOTECH engine guard offers additional protection against stone chips and unwanted ground contact while giving the bike a swashbuckling touch. The solid aluminum construction, which matches the vehicle design of the naked bike, has inlets for ventilation of the engine block, and a rubber-damped suspension serves to reduce vibrations. The 4-millimeter-thick engine guard easily mounts to original mounting points without drilling or welding using supplied custom steel mounting hardware. Additional protection of the engine against stone impact and in the event of ground contact: Made of high-quality aluminum alloy, the engine guard shows off its full capabilities off the road, but also gives street bikes added safety and an individual look. State-of-the-art manufacturing processes give the model-specific guards a secure fit without compromising ground clearance. Attachment to frame mounting points adds stability and allows for easy installation. Rubber cushioned suspension Good ventilation through circumferential air inlets Can be mounted without drilling or welding Load bearing and easy installation on original mounting points, no modifications to the motorcycle are required Model specific development for optimal fit Mounting material included in delivery Robust design made of high quality aluminum alloy

€210.00*

Details

SW Motech Brake fluid reservoir protection CB10984 / RS600

Brake fluid tank protection SilverR9T + Scrambler. Prevents contact between boot and foot brake cylinder and provides additional protection. Made of high-strength aluminum alloy lasered and channeled.

€40.00*

Potentiometer protection CB10985 / RS600

Potentiometer protection for BMW R9T + Scrambler. Protects the potentiometer and gives the bike an optical upgrade.

€40.00*

Valve cover protection CB10986M / RS600

SW-MOTECH cylinder protection R9T + Scrambler. To protect the Boxer valve cover against stonecuts and falls. Specially adapted to the shape of the valve cover and provided with a rubber cushion on the inside. A combination of lasered, brushed aluminum base frame and CNC-milled, black anodized aluminum pad.

€210.00*

Details

AC Schnitzer camber pad Axle drive CB10629 / RS600

AC Schnitzer crash pad for the axle in the Heritage model series can help to reduce damage which can be caused by falling, bumping or crashing on the gimbal or brake system. In addition, the crash pad has a very high quality appearance.

€279.00*

AC Schnitzer Cardboard Pad CB10630 / RS600

AC Schnitzer crash pad to protect the cardan drive. CNC machined from aluminum and black anodized. All materials needed for mounting are included. The Schnitzer sticker is included as an option, but does not have to be glued on.

€54.90*

Fork Foot Protection Achs Ball CB10631M / RS600

Achs Ball Fork Protector. In black or silver. Pair for left + right

€49.94*

Details

Protection for your BMW Heritage Line motorbike: safety and style for every ride

Ensure optimum protection for your BMW Heritage Line motorbike, be it the R nineT, R9T, R12, R12 nineT, R nineT Scrambler or R nineT Pure, and enjoy every ride to the full! High-quality protection is essential to protect your bike from the elements and unexpected impacts. Our range of protection solutions includes everything from sturdy frame and engine protection plates to robust mudguards and hand protectors. These accessories are not only functional, but also perfectly match the aesthetics of your Heritage models. Give your motorbike the protection it needs to ride safely and stylishly without compromising on looks. Rely on high-quality protection that gives you peace of mind and protects your bike from wear and damage - for carefree tours and adventures on two wheels!