Sideway licens plate support Swingarm LC

Classicbike-Raisch

€16.90*

€289.95*

€31.95*

€59.95*

€19.90*

€114.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

item number:	211257342.2-Kit
Shop-number:	CB11838

Product information "Sideway licens plate support Swingarm LC"

Side license plate holder including LED license plate light.
Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.
Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases.

Without expert opinion. From our experience, however, there are no problems with the green ones.

Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm

Tips for complete rear conversion:
In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed!
We offer you two options for this.
Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)
Option 2: You install a shorter & narrower aluminum mudguard

New blinker brackets must also be fitted if the original mudguard is removed.

The accessories described can all be found under accessories in this product description.

Triumph LC models from 2016:	Bobber Bobber Black Bonneville T100 Bonneville T120 Scrambler 1200 XC Scrambler 1200 XE Speed Twin - 1200 Speedmaster Street Cup Street Scrambler Street Twin Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS

Triumph LC ab 2016	Bobber 16" / Bobber Black EU 4 Bobber 16" / Bobber Black EU 5 Bobber 16" / Bobber Black EU 5 + Bobber 16" / Bobber Black Euro 5 + / BJ 2026 - Bobber 19" Bonneville T100 EU 4 Bonneville T100 EU 5 Bonneville T100 EU 5 + Bonneville T120 EU 4 Bonneville T120 EU 5 Bonneville T120 EU 5 + ( BJ 2025 ) Bonneville T120 EU 5 + ( BJ 2026 ) Scrambler 900 / Street Scrambler EU 4 Scrambler 900 / Street Scrambler EU 5 Scrambler 900 / Street Scrambler EU 5 + ( BJ 2025 ) Scrambler 900 / Street Scrambler EU 5 + ( BJ 2026 - ) Speed Twin 1200 EU 4 Speed Twin 1200 EU 5 Speed Twin 1200 EU 5 + Speed Twin 1200 RS Speed Twin 900 / Street Twin EU 4 Speed Twin 900 / Street Twin EU 5 Speed Twin 900 / Street Twin EU5 + Speedmaster EU 4 Speedmaster EU 5 Speedmaster EU5 + Street Cup Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS / FE

Zubehörartikel

Turn signal holder shock inside CB11675M / RS600

Turn signal holder for relocating the turn signals to the inner ladder of the suspension strut mount (inside of the frame). With matching screws for mounting the holders. The holders are black powder-coated. The optimal laying to install the turn signals as inconspicuous as possible. There are the turn signal holder optionally with 8er as well as 10er hole. This refers to the thread size of the turn signals. Most accessories turn signals have an 8er thread. The turn signals from our range with conventional halogen bulbs (such as the Drops or Arizona turn signals) still have a 10er thread.

From €16.90*

Details

Razor Bobber Hinterrad Kotflügel - Short CB12421 / RS3

The Razor short steel fender is the shortest rear fender available for the Triumph Bobber models. The fender comes ready painted in gloss black. The fender is suitable for all Bobber models. The perfect fender for anyone who would prefer to ride without a fender at all, but because of the splash protection does not want to do without it. The Razor is just long enough to protect the airbox / electronics box of the motorcycle, but visually protrudes only minimally above the swingarm. Classicbike-Raisch recommends when converting to the short fender, 3-1 taillight / turn signal to install as well as a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description. The fender is supplied plug & play with all mounts (also for the chain guard) for the original mounts.

€289.95*

Wiring harness accessories taillight & turn signal - LC CB11222M / RS600

This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.

From €31.95*

Details

Tail Underplate LC CB12235M / RS999

This black powder-coated aluminum lower shell replaces the original fender and ensures that the rear area remains closed after the removal of the original fender. This is notwenidg, so that in the rear of everything splashes, so that the rear continues to look reasonable and so that the electronics are not simply exposed. Makes sense, for example, if you want to convert your motorcycle to a side Kennzeiechenhalter and build the original fender away.

From €59.95*

Details

Turn signal relocation seat LC CB11087M / RS600

Turn signal relocation seat. These turn signal holders are bolted to the rear frame of your Triumph and then come a piece under the seat. Suitable screws for mounting, are included. The mounting plates have an 8 hole, in which you can attach most accessory turn signals. The plates are made of aluminum and black satin powder coated.

From €19.90*

Details

Sideway licens plate support Swingarm LC

Product information "Sideway licens plate support Swingarm LC"

Stellen Sie eine Frage