LED tail light for original mudguard

€349.00*

€114.95*

€44.95*

€169.00*

Triumph LC models from 2016

item number:	107020-F15
Shop-number:	CB12114M

Product information "LED tail light for original mudguard"

Twinton LED tail light, plug & play for the original Triumph Bobber mudguard.

The tail light is attached to the same mounting points as the original tail light, which guarantees a quick and easy installation (no drilling necessary).
The hole of the lower rear light mounting is closed with a nice cover, which is included in the delivery.

In addition, the tail light already has a suitable plug to connect it directly to the wiring harness.

The original central licence plate holder can no longer be fitted.
We recommend fitting a side number plate holder to the Twinton tail light. You will find suitable licence plate holders under the accessories articles in this description.

The housing of the rear light is manufactured using a selective laser sintering process. Afterwards, the housing is sanded several times, filled and then painted glossy black in several layers.
The material is a high-strength nylon polyamide.

The tail light is of course E-numbered.

Triumph LC models from 2016:	Bobber Bobber Black

Triumph LC ab 2016	Bobber 16" / Bobber Black EU 4 Bobber 16" / Bobber Black EU 5 Bobber 16" / Bobber Black EU 5 + Bobber 16" / Bobber Black Euro 5 + / BJ 2026 - Bobber 19" Speedmaster EU 4 Speedmaster EU 5 Speedmaster EU5 +

Zubehörartikel

CNC-machined side concentration camp badge holder CB11182M / RS2

CNC-milled side number plate holder for Triumph Bobber / Speedmaster, complete with parts certificate. This is exactly how a proper Bobber should look! On a Bobber, the number plate simply belongs on the side, not on the mudguard. What’s more, this side number plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 – Street Twin / Scrambler / Cup – Scrambler 900 – Speed Twin 900 The holder is beautifully CNC-machined and black anodised. An optional bracket is available for those who wish to continue using their Bobber’s original rear light, and a reflector fits onto the number plate holder (see accessories in this description). Details at a glance+ Side-mounted number plate holder+ 3-position width adjustment of the plate (towards or away from the wheel) + Option to tilt the plate by 30°+ Integrated LED lighting + Number plate can be inserted into the frame from above + Concealed internal cable routing + Surface finish with BLACKPearl anodising + CNC-machined aluminium+ Design: WUNDERKIND Custom Parts certificateThe holder is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed), it must be registered via individual registration (which is not a problem, however, thanks to the existing parts certificate).PLEASE NOTE for Bonneville models: On these models, the mount is NOT compatible with the original exhaust. The number plate is available to fit German (standard and 200x220 sizes), Austrian, Swiss and French number plates. Country Dimensions of number plateGermany: 180x200 mmGermany (large): 220x200 mmFrance: 210 x 130 mmAustria: 210 x 170 mmSwitzerland: 180 x 140 mmLuxembourg: 200 x 140 mm Versions without frame markingsDenmark: 245 x 170 mmItaly: 182 x 182 mmNetherlands / Belgium: 215 x 145 mmSpain / Norway: 225 x 165 mmUnited Kingdom: 234 x 183 mmCzech Republic / Poland / Sweden: 202 x 162 mm

From €349.00*

Details

Sideway licens plate support Swingarm LC CB11838 / RS1

Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

€114.95*

Turn signal holder Bobber original fender CB12310.1M / RS0

This turn signal holder allows the mounting of Kellermann Atto turn signals directly on the original fender of the Triumph Bobber & Speedmaster. The holder is designed for the Kellermann Atto turn signals. You MUST select the turn signals below in the description (the holder is only sold as a set together with the turn signals). The turn signals are available with either clear or tinted glass.There are automatically 2 pieces of turn signals in the cart, if you have selected one (because these are sold individually by Kellermann). In addition, we recommend you to order the Atto turn signal extension to it, because otherwise the turn signal looks so straight next to the fender behind and so is not reasonably visible. In the product photos, the extension is also installed. The extension can also be found a bit further down in the description. If you put this in your shopping cart, 2 pieces are automatically packed directly into the cart. The kit is legal and complies with the legal road traffic regulations. The holder is on the Bobber especially in combination with the small Twinton tail light. Included with the holder are all screws, sleeves, mounting hardware and detailed installation instructions that are needed for installation.

From €44.95*

Details

LED tail light for original mudguard

Product information "LED tail light for original mudguard"

Stellen Sie eine Frage