RxV Rear Kit - Bobber
| Shop-number: | CB12790 |
Product information "RxV Rear Kit - Bobber"
RxV rear kit for Triumph Bobber - Exclusively at Classicbike-Raisch
The RxV rear kit stands for the highest level of design excellence and was developed in close co-operation between Classicbike-Raisch and the renowned motorbike design company Vagabund Moto. Two years ago, this resulted in the extraordinary RxV Bobber, which caused a worldwide sensation with its unmistakable look. Now you have the opportunity to bring this iconic style to your own Triumph Bobber - with the exclusive RxV rear kit, which is an absolute eye-catcher, especially in combination with the matching RxV lamp mask.
Turn your Triumph Bobber into a custom bike!
The 3D-printed RxV rear end takes your Triumph Bobber to a whole new visual level. With the integrated LED tail light, which is perfectly integrated into the minimalist design of the rear, your Bobber becomes a unique custom bike that is guaranteed to attract attention on the road.
High-quality materials for the best quality:
- 3D printing technology: the rear consists of precisely manufactured plastic parts produced using the latest 3D printing technology and is robust as well as durable.
- Steel construction: The steel mount enables easy installation on the original attachment points of the seat of your bobber. In addition, the steel seat base plate ensures stability and gives you the option of customising the seat.
- Seat cushion and cover: The rear is supplied without a seat cushion and cover so that you can customise the seat design to suit your requirements. Visit your trusted upholsterer or ask us for a professional upholstery service.
- Paintwork: The rear consists of three 3D printed plastic parts. You can order these either in RAW (unpainted) or in glossy / matt black. The black parts are painted to customer order and have an approximate delivery time of 4-8 weeks.
LED rear light - stylish and functional:
The integrated LED rear light (incl. e-number) ensures clear visibility and fits perfectly with the clean, open design of the rear. Please note that the position of the rear light does not officially comply with the prescribed standard in the EU, as it is more than 30 cm away from the rear wheel. In practice, however, this is not a problem as the rear light is highly visible thanks to the open design of the Bobber.
Fitting instructions:
- Indicators: We recommend our frame indicator holder or frame flasher for mounting the indicators. You can find both products under accessories.
- Licence plate: We recommend a side licence plate holder for the perfect custom look. You can also find suitable models under accessories.
- Mudguard: For an optimum look, we recommend fitting a short mudguard or no mudguard at all. You can find two different short mudguards among our accessory products.
- Wiring : To be able to simply plug the rear light and new indicators into the wiring harness plug of your Bobber, we recommend ordering the cable set.
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 16" / Bobber Black Euro 5 + / BJ 2026 -
Bobber 19"
|
|---|
10
10
10
10
There aren't any asked questions yet.
Skip product gallery
Accessories
RxV headlight kit - Bobber
CB12789.3
/ RS10
€579.00*
Colour:
Raw
RxV “Raisch x Vagabund” headlight fairing incl. LED spotlight for Triumph Bobber – turn your Bobber into a real head-turner!
If you want to give your Triumph Bobber a completely new and exclusive look, there is no way around the RxV headlight fairing including LED headlights. This unmistakable design piece was developed by the renowned motorcycle design company Vagabund Moto in collaboration with Classicbike-Raisch – and the result is more than just another component: it is a real statement.
The RxV headlight kit is the centerpiece of our exclusive RxV Bobber project, which was developed in collaboration with Vagabund Moto. This special Bobber has attracted a lot of attention due to its design elements such as the striking headlight fairing and the unique rear conversion. Both components, the headlight mask and the RxV rear end, are available to buy exclusively from Classicbike-Raisch – so you can give your own Triumph Bobber the unmistakable RxV look.
Your Bobber, redefined:
Exclusive design from Vagabund Moto: the perfectly designed headlight fairing gives your Bobber a sophisticated and modern look It is a highlight for anyone who wants to stand out from the crowd with their bobber.
Complemented by the RxV rear: The completely redesigned rear end, which you can also find exclusively from us, rounds off the overall design. This design duo – headlight and rear – transforms your Triumph Bobber into a real custom bike.
Premium materials and perfect fit: Each part has been 3D printed with the highest precision to seamlessly fit your Bobber and ensure easy installation.
Paintwork: The headlight mask is available either in RAW (unpainted) or in gloss/matt black (the painted parts are made to order and have a rough delivery time of 4-8 weeks
Easy installation – all materials included:The headlight kit comes with all the necessary brackets and mounting materials.For bobber models with a standard LED headlight, we recommend the optional cable set for a plug-and-play installation without any cutting or soldering. You can find this add-on in the accessories section of our shop.
Optics tip from Classicbike-Raisch:Do you want to perfect the clean look of your bobber? Combine the RxV lamp mask with a smallMotogadget speedometer that makes the front of your bobber look even more minimalist and elegant. Of course, you can also find this high-quality speedometer in our shop!
Indicator Brackets Bobber Frame
CB12172
/ RS3
€19.90*
The turn signal holder Frame for Bobber & Bobber Black allow the mounting of all turn signals with M8 thread on the inside of the frame on your Bobber.
Visually, the turn signals are here as good as no longer noticeable, if you use nice small. From behind they are nevertheless very well visible, since they are higher than the rear wheel & the fender. In the pictures 3-1 turn signals are installed which combine tail light, brake light & turn signal in one. We then did not install a central tail light on the Bobber. This makes for an extremely tidy tail.
Included with, are 2 black plastic caps that are pushed over the nuts of the turn signals so that they do not stand out.
The holders are made of aluminum and then black powder coated.
Frame Flasher Bobber
CB12617
/ RS5
€219.00*
Plug & Play turn signal/tail light combination pair, specially designed and manufactured for the Triumph Bobber. Very bright thanks to modern SMD LED technology.
Made in Germany.
The set is fully wired and no soldering or crimping is required for installation. We deliver the turn signal/tail light set already wired so that it can be easily plugged into the original connector located behind the Bobber's battery.
This kit was developed especially for short fenders, such as the short version from KRT (see accessories in this product description).
We have chosen the position of the turn signals to be as inconspicuous as possible, while ensuring that they are clearly visible when in use. Unfortunately, this position does not comply with road traffic regulations (StVO) and may not be used officially in road traffic, as the indicators are too far from the end of the rear wheel (however, the 3-1 indicators are 100% visible and very easy to see, so we do not have any safety concerns with this kit).
Even though the turn signals have an E-mark, there is little leeway for positioning the turn signals due to the short fender.
Sideway licens plate support Swingarm LC
CB11838
/ RS1
€114.95*
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases.
Without expert opinion. From our experience, however, there are no problems with the green ones.
Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm
Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard
New blinker brackets must also be fitted if the original mudguard is removed.
The accessories described can all be found under accessories in this product description.
Licensplate Holder site ways CNC
CB11182
/ RS2
€349.00*
Design:
DE Kennzeichen
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender.
The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900
The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description).
Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom
The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust.
The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.
Side licence plate holder - rear wheel BMW
CB12774
/ RS5
€239.95*
Side licence plate holder behind the rear wheel for BMW R nineT & R12 models.
This licence plate holder gives you the option of legally mounting your licence plate on the side without having to register the holder with the TÜV.A very practical solution for motorbikes that have a very short rear end and cannot find a good place to mount the licence plate and indicators or 3-1 indicator / tail light combination. In addition to the licence plate holder, you can also order indicator holders (see accessories below this description). With this solution, you can easily get your lights and licence plate into a legal position (no TÜV registration required).
The licence plate holder comes with a small LED licence plate light (road approval with E-number). This is fitted with a 120mm long carben.Dimensions of the licence plate: 176 x 127mm - this means that any licence plate can be fitted.
Race Bobber rear mudguard
CB12622
/ RS0
€269.00*
Colour:
Raw
Race Bobber rear wheel fender for Triumph Bobber.
Probably the narrowest and sportiest wing available for bobbers. Known from our Race Bobber conversions, on which we install the fender.
The mudguard is just right for you if you want to give your bobber a slightly sporty touch or even convert it to racing tyres (as shown in the product pictures). The short and narrow line offers a very clear view of the rear tyre.On the one hand, this provides minimal splash protection (suspension strut, battery, airbox and electrical components are fully protected) and on the other hand, a short, sporty mudguard looks even better than none at all.
The mudguard mounting system allows you to customise the positioning of the mudguard. This is because the distance between the fender and tyre is freely adjustable.
Especially if you are aiming for a sporty look, the mudguard should be positioned close to the tyre. This adjustment can easily be made on the suspension system of our fender.
The mudguard can also be optimally adjusted when using different tyre types. However, please note that a tyre expands at high speeds. Therefore, a minimum clearance of 7 mm should be set.
Versions and their finishes:
The RAW & painted version is made of high-quality / stable GRP, for which a material certificate is even available.
Matching accessories: To build a complete rear kit around the short mudguard, other accessories such as licence plate holder, indicators / rear light, short chain guard and a matching front mudguard are required.You can find our product recommendations for the short mudguard under the accessories in this product description.
Rialto Bobber rear fender
CB12427
/ RS3
€429.95*
The Rialto steel fender is a short steel rear fender for the Triumph Bobber models. The fender comes ready painted in gloss black.
The fender is suitable for all Bobber models. The fender is significantly shorter than the original and gives your Bobber a tidy rear area and a freer rear wheel. However, it is still long enough to provide good splash protection.
Classicbike-Raisch recommends when converting to the short fender to install 3-1 tail light / turn signal and a side license plate holder. You will find suitable turn signal holders and license plate holders under the accessories in this description.
The fender comes plug & play with all mounts (also for the chain guard) for the original mounts.
Wiring harness accessories taillight & turn signal - LC
CB11222.2
/ RS600
€49.95*
Model:
Bobber / Bobber Black / SpeedM.
This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.
Variants from €31.95*