This BMW tank emblem milled from aluminium is just the thing for all BMW drivers who like it black and beautifully simple! The subtly hinted BMW propeller and the finely milled BMW lettering look very elegant. Attention:The emblems are sold individually The original emblems on the tank are glued on and can be carefully removed.The new black emblems have double-sided adhesive on the back and can therefore be easily attached to the motorbike. Classicbike-Raisch tip: We also offer matching brake/clutch reservoir covers in "The Line" design. These can be found under accessories for this product. Diameter tank emblem: 70mm

This BMW tank & seat hump emblem milled from aluminium is just right for all BMW riders who like it black, true to the motto Black is beautiful. The original emblems on the tank and on the hump are glued and can be carefully removed.The new black emblems have a double-sided adhesive on the back, making them very easy to attach to the motorbike. The emblems are sold individually. Diameter tank emblem: 70mm / Diameter hump emblem: 26mm

The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours.     Relief for back and buttocks     Prevents numbness and painful pressure points     Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs     Especially high vibration damping     Integrated valve allows variable air filling     Two sturdy straps with ROK straps and anti-slip underside for precise positioning     Theft protection by fixing under the seat     Surface made of robust, bi-elastic artificial leather for special seating comfort     Waterproof interior: Air cushion made of polyurethane dimensions:     Small: 22,0 x 30,0 cm     Medium: 30,5 x 30,0 cm     Large: 33,5 x 38,0 cm

Unit Garage Komfort Sitzbezug in verschiedenen Farben für die Standard Sitzbank der BMW R12 G/S    Dieser Sitzbezug (wahlweise in Kunst oder Echtleder) erhöht durch eine auf der Innenseite, zusätzlich angebrachte Schaumstoffschicht den Sitzkomfort bei deiner G/S. Grundlegen hat die originale Sitzbank ja eine sehr schöne form, weshalb es reicht, den Komfort und die Optik durch andere Farben zu ändern.  Du kannst dir die Sitzbank in klassischen Schwarz oder Braun (Echtleder) bestellen oder in knalligen Retro Farben (Kunstleder), die den Stiel der G/S stark unterstreichen.Grade die Retro Farben sorgen zusammen mit weiteren Unit Garage Retro Teilen für einen richtig coolen Old School Rallye Dakar Look.Weitere Produkt Empfehlungen für den Retro Stiel findet ihr unterhalb dieser Beschreibung unter den Zubehör Produkten.  Montage:  Die fachgerechte Montage erfordert etwas handwerkliches Geschick.Wenn du dir das nicht zutraust, empfehlen wir zu einem Sattler zu gehen (probieren geht hier aber über studieren, da man eigentlich nichts kaputt machen kann).Vorgehensweise:1. Den Sitz vom Motorrad abnehmen2. Originalen Sitzbezug lösen, indem du die Klammern entfernen3. Neuen Sitzbezug mit neuen Klammer (Schuss Tacker) befestigen. Polster vorab ordentlich zentrieren. Passend für die standard Sitzbank der R12 G/S    

Unit Garage comfort seat cover in various colours for the rally seat of the BMW R12 G/S This seat cover (available in imitation or genuine leather) increases the seating comfort of your G/S with an additional layer of foam on the inside. You can order the seat bench in classic black or brown (genuine leather) or in bright retro colours (imitation leather), which emphasise the style of the G/S.The retro colours, together with other Unit Garage retro parts, create a really cool old school Rallye Dakar look.Further product recommendations for the retro handle can be found below this description under accessories. Installation: Professional assembly requires some manual skill.If you don't feel confident doing this, we recommend going to a saddler (but the proof of the pudding is in the eating, as you can't actually break anything).Procedure:1. remove the seat from the motorbike2. loosen the original seat cover by removing the clips3. attach the new seat cover with a new staple (shot stapler). Centre the upholstery properly beforehand. Suitable for the original BMW Rallye accessory seat of the R12 G/S

Seat cover / seat hump in a Flat Style design for the original seat of the BMW R12 nineT     Style The BMW R12 nineT / R12 S is practically crying out for a flat tail section.We have made it our mission to develop the perfect solution here:The flat tail section integrates absolutely seamlessly with the nineT’s original rear end, seat and rear light. The rear end looks particularly good when combined with ourRear Eliminator Kitfor the R12.You’ll find this listed under the product description in the accessories section. Pictures speak louder than words – the product images speak for themselves. BMW emblem: Please note, the emblem is NOT included in the delivery. We recommend ordering our black Milled emblem to go with it (as shown fitted in the pictures). You’ll find it amongst the accessories listed below this description. Well-designed plug-and-play mounting system Our Classicbike-Raisch flat hump cover isn’t just any old cover that we’ve quickly designed to offer ‘something’ for the original seat.Many hours have gone into the design to ensure the look is as clean and harmonious as possible. The entire mounting system, which ensures the hump is held perfectly in place, sits invisibly beneath the cover.This keeps the exterior design absolutely clean –no visible screws. High-end quality – Made in Germany The Flat Seat cover was developed and designed entirely in-house.It is manufactured in Germany in small batches using state-of-the-art 3D printers – to the very highest standard. Surface options RAW:Unpainted, but already primed. Simply have it painted in your chosen colour by a professional painter. Matt Black:Pre-painted in a silk matt black finish – ready to fit straight away.

  Aluminum hump for BMW R12 nineT - Give your bike the ultimate cafe racer look This high-quality aluminum hump transforms your BMW R12 nineT into a real cafe racer in no time at all. Traditionally, a cafe racer dispenses with a two-person seat and instead relies on a distinctive hump, which provides the typical sporty style. The seat cover can be easily removed so that you can also ride your R12 comfortably with two people if required. The hump is made of brushed aluminium and is then clear anodized to keep the elegant, brushed surface visible while protecting the material from external influences. For those who prefer an individual touch, the aluminum surface is perfect for painting. This allows you to design the hump in the same color as your motorcycle and give your bike a harmonious overall look.

This Unit Garage seat cover in matt black fits on the original seat of the BMW R nineT Pure & Classic. The cover gives you the opportunity to make a really nice single-seater out of the R nineT. The nice thing is that the cover can be easily replaced with the pillion seat cushion. As this can be done very quickly, it is also possible to convert the motorcycle back to two-man operation without great effort. Can be used with both the original and accessory license plate holders.

This Unit Garage seat cover in matt black fits on the original seat of the BMW R nineT Scrambler & Urban GS The cover gives you the opportunity to make a really nice single-seater out of the R nineT. The nice thing is that the cap is simply attached under the original seat.If necessary, the cap can be removed again in a short time and your R9T is ready to be ridden by two again. Can be used with both the original and accessory license plate holders. The white of the cap is the same color (light white) as the Urban GS.