€0.00*

Rizoma Alu Rear Mudguard BL & SI

Skip image gallery

€169.00*

% €235.00* (28.09% saved)

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €99.95*
from €79.95*
from €80.00*
from €21.95*
from €164.95*
from €72.00*
from €29.95*
€8.90*
item number: ZTH051A
Shop-number: CB11264

Product information "Rizoma Alu Rear Mudguard BL & SI"

Aluminum mudguards for Bonneville and StreetTwin models.

Fitting to the front wheel fender, Rizoma also has a rear wheel fender in the same aluminum finish.

The mudguard is supplied with plug and play with mounting brackets and screws. Holes for the taillight must be set individually. We recommend the rear lights which can be found in the accessories of this description,

The license plate must be attached to the side of the wing or an additional license plate must be fitted.

Triumph LC models from 2016:
  • Bonneville T100
  • Bonneville T120
  • Street Cup
  • Street Scrambler
  • Street Twin
Triumph LC ab 2016
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T100 EU 5 +
Bonneville T120 EU 4
Bonneville T120 EU 5
Bonneville T120 EU 5 +
Scrambler 900 / Street Scrambler EU 4
Scrambler 900 / Street Scrambler EU 5 - Street Scrambler / Scrambler 900
Scrambler 900 / Street Scrambler EU5 +
Speed Twin 900 / Street Twin EU 4
Speed Twin 900 / Street Twin EU 5 - Street Twin / Speed Twin 900
Speed Twin 900 / Street Twin EU5 +
Street Cup
2
2
2
2

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Zubehörartikel

Eldorado LED Alu taillight
Eldorado LED Alu taillight CB11194.2M / RS1
Finally a small taillight, in the classic design, that despite the small size is bright. Everyone who now thinks LED with a classic motorcycle, it does not fit. Is wrong, because the rear light fits like ass on bucket to our bikes and also the LED light looks good. The housing is completely metal. In the non-visible area, there is a small slot on the underside, in which the license plate lights. Tail light is with E number. Rücklicht ist mit E-Nummer

€99.95*
Details
Reprobate LED aluminium rear light
Reprobate LED aluminium rear light CB12918 / RS1
LED rear light in classic Bates style - high-quality die-cast aluminium, E-approved Motone has reinterpreted the legendary Bates rear light design - just as it should be: elegant, detailed and robust.The Reprobate model takes up the typical shape of the Bates rear light, but looks even more elegant thanks to the fine cooling fins on the rear and the clean finish. The solid die-cast aluminium housing not only ensures a first-class look and feel, but also a long service life - whether for everyday use or on tour. Mounting & compatibility Fits on all pre-drilled Motone mudguards thanks to the three fixing points Can also be universally mounted on other mudguards Integrated joint for perfect angle adjustment on every mudguard Technical details LED technology for clear, bright illumination With E-number - approved for road traffic No integrated licence plate illumination A rear light that not only works, but also gives your bike the finishing touch in terms of style - classic, discreet and high-quality.

€79.95*
Details
Rizoma LEGGERA indicators
Rizoma LEGGERA indicators CB11274.2M / RS0
Rizoma "LEGGERA" mini indicators made of billet aluminium in top quality. Minimalist indicators for anyone who wants them to be as inconspicuous as possible, but does not want to compromise on safety and an elegant finish. The indicators shine very brightly thanks to modern LED technology. The indicators have an E number. The price is for a single indicator. Anyone who knows Rizoma knows the high quality of these products. This also applies to the indicators. The indicators are available with white position light (only for the front!) or without. Silver indicators: sold individuallyBlack indicators: sold as a pair Classicbike-Raisch tips: Accessory indicators are always supplied by the manufacturers with universal plugs or completely without plugs. If you simply want to connect the indicators to the original wiring harness of your motorbike, you can also order suitable indicator plugs for your motorbike (you can find the plugs under the accessories in this description).Our years of experience have shown that unfortunately there is no rule as to which motorbike models require an indicator resistor and which do not. So if you want to be 100% sure that the indicators flash at the correct frequency after converting to accessory indicators, we recommend buying a set of resistors (you can find them under accessories in this description).

€80.00*
Details
Indocator holder universald
Indocator holder universald CB11295M / RS0
Universal indicator holder for mounting the indicators on the rear of the licence plate. The holder is 17.5 cm wide. The holder is made of aluminium and coated in black powder.There is a very practical slot in the two indicator holes, which makes it possible to fit indicators without having to disconnect the cable.The holder also has two slotted holes so that it can be easily attached to your licence plate screws without having to drill any holes. The indicator holder is available with either an 8 or 10 mm hole. This refers to the thread size of the indicators. Most accessory indicators have an 8 mm thread. The indicators from our range with conventional halogen bulbs (such as the Drops or Arizona indicators) still have a 10 mm thread.

€21.95*
Details
Licens holder side ways LC
Licens holder side ways LC CB11092M / RS2
Thruxton Thruxton, BonnevilleT120 + T100, and all StreetTwin models (does not fit with Thruxton R if the original struts are installed) attached to the strut. For all who have their license plates on the side and on the middle height of the motorcycle want to have their rear already free and clean. In the kit is the license plate with license plate illumination, a complete cable set for the wiring of turn signals, taillight and KZ luminaire, & a fitting instruction. If you do not want to crimp and solder the cable kit yourself, we also offer this as a service (see accessories in this description). Optionally, the kit can be ordered with a base plate (this is used as a splash guard if you do not want to have a fender installed anymore). The kit is ideally suited for mounting a taillight / turn signal combination (see accessories in this description). Alternatively, a short aluminum mudguards with classic old school taillight and chic turn signals would look (simply in the lighting category rummage). There are several points at which the turn signals can be installed in conjunction with the license plate (you can find all the suitable turn signal holders in the accessories of this description).

€164.95*
Details
Rizoma IRIDE Indicators
Rizoma IRIDE Indicators CB11270M / RS0
Beautiful classic turn signals from Billet aluminum from Rizoma in all top top quality. The turn signals are very bright thanks to modern LED technology. The turn signals are with E-number. The price is for a single turn signal. Who knows Rizoma, knows the high quality of these products. This also applies to the turn signals. If you would like to have the turn signal arm a little longer, e.g. to keep minimum dimensions, to get better visibility or similar, then we recommend to order an additional turn signal extension (see accessories in this description). The indicators are sold individually.

€72.00*
Details
Universal license plate holder
Universal license plate holder CB11294M / RS600
Universal identification holder for mudguards. The license plate is universal for many mudguards. It is screwed from the inside to the fender (see photo)

€29.95*
Details
License plate screw set
License plate screw set CB11444 / RS0
These screws are powder coated in the matching colors (white / blue / black) for the license plate. We have our stainless steel screws powdered in Germany. This allows us to guarantee a high quality. The tool still fits, even the color does not burst. Delivery: 1x screw M5x20 blue 2x screw M5x20 black 3x screw M5x20 white 4x self-locking nut M5 4x washer M5 DIN9021 The advantages of powder-coated screws: - Mechanically resilient - Corrosion resistant - Weather resistant - Environmentally friendly

€8.90*