Products from keine Angabe
No results were found for the filter!
The ideal charger for all motorcycle batteries, whether lead, liquid, lithium-ion, AGM. With us for months in the test. However, it can also be used to charge stronger car batteries. To the kit belongs with us a charge state cable which...
€89.95 *
Spark plug nut for all water glow twins. High-quality workshop quality. With magnet, so that the spark plugs remain in the nut.
€12.95 *
Bowden cable + nipple Pannenset. Should not be missing on any tour. This can be used to repair more than one Bowden cable. At my last Alpentour could be repaired after a fall, the broken handbrake lever. Otherwise, only the towing car...
€6.99 *
BMC cleaning kit for air filters with cleaner and oil. Since the BMC air filters we sell are made of a metal mesh, after a certain mileage, they do not have to be replaced like a simple paper filter. The metal filters can simply be...
€22.95 *
Old School taillight. LED black metal housing, red glass - with number plate illumination and E number
€69.95 *
Mirror broadening for a perfect rear view 40mm outwards and 35mm upwards. Alu PAIR. We recommend. Fits only for accessory mirrors or in connection with our mirror adapter for Bonnie and Thruxton EFI.
€24.95 *
Alternator / stator for all 2 cylinder models. Replacement for the originals. Best quality and much cheaper than an original spare part. Plug & Play solution right with the right plugs Fits only for the carburetor models.
€183.95 *
SCHNUFFI! If you install a large air filter cover, you will feel the increased performance directly. The only problem is that with increasing speed (can already be from approx. 90km/h) the power can evaporate. (doesn't have to be) Some...
€79.90 *
Blinker Ochsenauge chrome, because Kellermaenner does not fit to Bonnie + Thruxton. Handlebar female threads must be removed from the original sinker, or use a handlebars without handlebar ends / pair. Very good quality ! Suitable...
€42.95 *
K & N exhaust filters all models. Carburetors require gasoline and no residues. The crankshaft ventilation, which is usually connected directly to the original air filter, causes oil and other engine residues to get into the intake...
€47.95 *
Fittings screws stainless steel 10 pieces. Front, rear, down. (For the Bonnie 9 screws are needed, for the Thruxton 7 screws) Replaces the rust-proof original screws.
From €6.95 *
Adapter for Bonnie T100 for attaching the HBK mirrors to the 1 serial link. not illustrated
€19.90 *
Secondary air system Eliminator Kit. Prevents exhausting and prevents the elbows from becoming so hot. Do the engine well. Easy to assemble and remove at any time. These screws are made of ALU. And are specially manufactured with fine...
From €37.89 *
Fork kit BONNIE + SCRAMBLER. With this kit, the fork of the BONNIE + SCRAMBLER like the Thruxton fork in the spring preload is now fully adjustable and can be adapted to any road surface and load condition. The kit consists of OEhlins...
€299.00 *
Flat shock absorbers for Thruxton or Bonneville. 307 mm long. It can not be flatter. These Ikon spring struts are specially built by us. The system is equipped with a very hard spring. In addition, we add an end stop to limit the stroke....
€571.13 *
Magura throttle grip wheel handle throttle handle with cable pulling out parallel to the handlebar model 314. Quality from good old Germany - DUO adjustable (motocross or enduro) short or long way. Voteile: Much more exact, almost...
€49.02 *
Grip rubber pair for the Magura throttle grip. Very high quality rubber (EXTRA) Fits 22mm handlebar from Thruxton and Scrambler
€16.90 *
Magura throttle grip Classic. Polished aluminum. Great look. A throttle cable. For 22mm scrambler handlebar. Made in Germany
€89.90 *
Carburetor stainless steel screw kit. Replaces the very soft Philippsschrauben of the original Keihin CVK carburetor. At some time their heads are gauged, and then bored. Easy to exchange.
€9.90 *
Carburetor needle kit BONNIE 790 CCM with 2 needles, washers and complete stainless steel screws, which replace the Keihin carburetor bolts. The larger needles of the Thruxton give some more pressure in the middle area.
€49.90 *
Brake fluid leveling tank with CNC Aludeckel THRUXTON. Colors: Black, silver, gold, blue, anthracite, red
€50.00 *
A PAIR of leather tank pads in different designs. The Classic Tankpads are available with a diamond or stripe pattern. In addition, the pads are available in 3 different smooth leather colors as well as 2 suede tones. The Classic Leather...
€69.00 *
A PAIR of mini leather tank pads in different designs. The mini tank pads are available with a diamond or stripe pattern. In addition, the pads are available in 3 different smooth leather colors as well as 2 suede tones. The Mini Leather...
€61.00 *
A PAIR of leather tank pads in the Legacy design. Legacy tank pads are made from a nice blend of suede and smooth leather. Choice of brown or black. The leather tank pads are easily adhered to the tank with a strong adhesive, 3M film...
€69.00 *
Connection cable for mounting the Motogadget Mo.Hub on the BMW R9T models. Is mandatory if you buy the parts together individually. In the Mo.Hub kits, the cable is already included.
€12.00 *
Mit dieser Motorradabdeckung mit Triumph-Logo schützen Sie Ihr Bike vor der Witterung. Robuste Außenkonstruktion mit extern verklebten Nähten, reflektierenden Details, einem hitzebeständigen Futter, verstellbarem Bauchgurt und...
€129.00 *
Triumph original luggage carrier with passenger handles, made of pressed aluminium, suitable for Triumph Scrambler 1200 XC / XE. Such a luggage carrier is simply practical for every tour as well as for everyday use. Very practical and...
€305.00 *
Adapter cable to extend the original H4 headlight cable. Very handy if you need to put the wiring of the motorcycle under the tank.
€19.95 *
The CAN-BUS universal resistor can be set to several different ohm numbers (see list below). Who does not know the problem that the flashing frequency does not fit anymore when converting to LED flashers? The problem hasn't become any...
€29.95 *
Pair of cover caps including 2 stainless steel screws for fastening. The caps cover the turn signal mount on the oil cooler of the R9T models, if you mount the turn signal in another place (for example handlebar ends or under the...
€42.95 *
Want a different style on your R9T? This angular cover for the intake channel changes the appearance of the R9T, on the right side of the motorcycle, significantly. It fits perfectly into the design of the other JVB parts in our range,...
€199.00 *
Zard 2-1 slip-on shock for R9T Euro4 in flat track style. Fits R9T Classic, Urban GS, Pure & Racer. With E-number (in the road version). Fits also on Euro3 models (but is without approval for this). A rear silencer in flat track / dirt...
From €978.00 *
Zard 2-2 Slip-On muffler for R9T Scrambler. A Scrambler exhaust as it is in the book! This is exactly how the exhaust must look on a Scrambler. Two slim, tapered mufflers that are nice and tight on top of each other. That paired with the...
From €1,272.00 *
Zard 2-2 slip-on muffler for R9T Scrambler in Hardy style. Two beautiful top-mounted mufflers that are tapered and have a slanted end cap. Due to the slanted end caps, the exhaust opening looks particularly large and provides the cool...
From €1,135.00 *
Zard 2-1 Slip On Damper for R9T Euro4 in the 80's style. Fits R9T Classic, Urban GS, Pure & Racer. With E-number (in the Road version) Fits also to the Euro3 models (but is without registration) A classic silencer reminiscent of...
From €999.00 *
Ribbed alternator cover suitable for all LC models (900cc & 1200cc engines except Thruxton TFC, RS & Scrambler ) in 50s design. Made of die-cast aluminium in black, silver matt & polished available. The sealing surfaces are naturally...
€329.95 *
Ribbed clutch cover suitable for all LC models (900cc & 1200cc engines) in 50s design. Made of die-cast aluminium in black & polished available. The sealing surfaces are naturally milled (a seal is included). The dimensions are identical...
€579.95 *
Ikon stereo struts for Thruxton 1200. Also fits the R for those who like it classic (but with the R but no improvement da). Very good middle class dampers in classic design. The original dampers far ahead. 345mm long, adjustable...
€499.00 *
Ikon stereo struts for Bonneville T100 & T120 as well as StreetTwin, Cup and Scrambler. Very good middle class dampers in classic design. The original dampers far ahead. 345mm long, adjustable compression as well as an adjustable...
€499.00 *
Seat bench screws in long (45mm). These screws end approximately with the original SItzbank. For those who want it even more practical than the short ones.
€29.95 *
Milled and anodised rear wheel adjuster kit as a replacement for the standard part. Fits Thruxton1200, Thruxton1200 R, Bonnie T120 & StreetTwin
€45.00 *
Noble chain tensioner for all water-cooled models made of brass. These tensioners are manufactured in an old, classic warm forging process and then polished by hand. The chain tensioners are a beautiful eye catcher on the swingarm of the...
€74.95 *
We coat your original rear silencer black. Many would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original muffler and we coat it in black matt with a heat resistant...
€300.00 *
Original BMW fork Simmering + Staubzuschzkappe for all BMW R nineT models. The Simmerrings should be made new at each fork revision. The set consists of 2x fork oil seal - 2x dust cap.
From €69.95 *
Very high quality sliding bush for the standpipe of the original fork (inner tube the chrome plated) SINGLE. Since the coating of these bushings rubs off over the years, they should be renewed during a fork revision.
€21.00 *
Original Triumph sliding bushes for the sliding tube (outer tube the black one) SINGLE. Since the coating of these bushings rubs off over the years, they should be renewed during a fork revision.
€18.50 *
Knurled screw pair for the Thruxton seat cover. Much nicer than the originals and also much more practical, because no tools are needed. The screws have a knurled attachment. Because of this they can be turned perfectly with the hand on us.
From €18.95 *
Extra long aluminium seat screw (70mm) to remove the seat without tools. These screws are a bit longer than the original seat.
€30.95 *
Side cover screw with which one can remove the side cover disassembly without tools, which under certain circumstances can be very practical. For example, if a safety device is broken and it needs to be tapped. In addition, the aluminum...
€23.95 *
Beautiful leather knee pads, in Diamond Style for the tank of all water cooled Triumph Modern Classic motorcycles. (Please select the model in the selection). These Tankpads have many positive aspects. They protect the tank's varnish in...
€119.00 *
Beautiful leather knee pads, in UK-Jack Style for the tank of all water cooled Triumph Modern Classic motorcycles. (Please select the model in the selection). These Tankpads have many positive aspects. They protect the tank's varnish in...
€167.00 *
Knee pad in a classically simple design. The knee pads are self-adhesive and only need to be stuck on. Not recommended for matt paintwork, as stickers do not hold well on matt paintwork. The knee pads look very nice, because they set a...
€65.00 *
Union Jack style knee pad. The knee pads are self-adhesive and only need to be glued on. Not recommended for matt paintwork, as stickers do not hold well on matt paintwork. The pads look very nice on the one hand because they set a nice...
€65.00 *
Triumph Rubber Knee Pads for all Triumph models A set of self-adhesive rubber knee pads that provide additional rider comfort and protect the tank. And also add a nice visual accent. With Triumph branding. Not suitable for matt...
From €70.00 *
Rubber tank pad. Self-adhesive, robust rubber tank-pad for the protection of the tank for zipper wear and wear. With Triumph Brand Marking -
€39.00 *
This accessory bag can be attached to the Slim tank straps as an accessory bag. It is attached to the belt within seconds. Looks cool and is very practical to take a few small things like cell phone, wallet etc. with you. Because who...
€60.00 *
This leather cell phone bag can be attached to the Slim tank straps as an accessory bag. Is attached to the strap within seconds. Very practical to use a cell phone navigation system.
€49.00 *
The Rizoma DBL system is a safety device that activates a flashing brake light to warn vehicles behind an intense and sudden braking. The device is activated when properly mounted on the motorcycle when the vehicle makes a sudden...
€118.00 *
Classic Silencer from England by Norman Hyde for Triumph Bonneville T100 & T120. The Norman Hyde systems have a very nice sound. Really nice muffled & bassy. If the sound is too loud with the completely open exhaust system, we also offer...
€699.00 *
Turn signal Old Style. Look of the seventies! Heavy duty quality made of solid thick aluminum. This has something in your hand. It does not get more classic than this! These turn signals are just right for those who want to convert their...
€64.90 *
Universal luggage rack for the tank of your motorcycle. In the style of the old Triumph motorcycles. A fancy eye catcher on every tank. Fits perfectly to all Old School conversions, Scramblers, Bobbern and so on. The luggage carrier is...
€79.95 *
Classic tank emblem with four strips of black cast in black with chrome accents.
€145.00 *
Mit dieserm Adapter kann man ganz einfach, ohne Kabel abzuschneiden und zu löten, das Standlicht eines LED Scheinwerfers an ein Motorrad anschließen, das serienmäßig einen einfachen H4 Scheinwerfer mit Standlichtbirne hat.
€6.95 *
A pair of aluminum adapters for paddock / mounting stand. These are simply screwed into the swingarm. Together with a paddock stand the rear wheel of the motorcycle can be lifted easily.
€31.00 *
A pair of aluminum adapters for paddock / mounting stand. These are simply screwed into the swingarm. Together with a paddock stand the rear wheel of the motorcycle can be lifted easily.
€74.95 *
Those who have cut the original turn signal cable harness side and want to have everything original again, needs these plugs. Can also be used as a plug connector for accessory flashers etc. together with our counterpart Item No. CB11072.
€8.90 *
Those who have cut the original turn signal cable harness side and want to have everything original again, needs these plugs. Can also be used as a plug-in connector for accessory flashers etc. together with our counter part number cb10825.
€8.90 *
This parking light bulb produces a modern white, slightly bluish light. Thus the headlight light of a simple H4 headlight appears clearly modern. Looks especially good in combination with the Night Breakt bulb on the air-cooled Triumph...
€7.95 *
Who can be the original exhaust holder coated black, which usually wants to have the disc additionally black. The disc simply send to us and we take care of everything. Duration until you have the part back is about 4 - 6 weeks. By...
€20.00 *
Viewed