€0.00*

Race Bobber rear mudguard

Skip image gallery

€289.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

item number: CR-LC-1020-GFK-RAW
Shop-number: CB12622M

Product information "Race Bobber rear mudguard"

Race Bobber rear wheel fender for Triumph Bobber.

Probably the narrowest and sportiest wing available for bobbers.
Known from our Race Bobber conversions, on which we install the fender.

The mudguard is just right for you if you want to give your bobber a slightly sporty touch or even convert it to racing tyres (as shown in the product pictures). The short and narrow line offers a very clear view of the rear tyre.
On the one hand, this provides minimal splash protection (suspension strut, battery, airbox and electrical components are fully protected) and on the other hand, a short, sporty mudguard looks even better than none at all.

The mudguard mounting system allows you to customise the positioning of the mudguard. This is because the distance between the fender and tyre is freely adjustable.

Especially if you are aiming for a sporty look, the mudguard should be positioned close to the tyre. This adjustment can easily be made on the suspension system of our fender.

The mudguard can also be optimally adjusted when using different tyre types. However, please note that a tyre expands at high speeds. Therefore, a minimum clearance of 7 mm should be set.

Versions and their finishes:

The RAW & painted version is made of high-quality / stable GRP, for which a material certificate is even available.

Matching accessories:

To build a complete rear kit around the short mudguard, other accessories such as licence plate holder, indicators / rear light, short chain guard and a matching front mudguard are required.
You can find our product recommendations for the short mudguard under the accessories in this product description.

Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 16" / Bobber Black EU 5 +
Bobber 16" / Bobber Black Euro 5 + / BJ 2026 -
Bobber 19"
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Accessories

Side Mount Lizenz support Bobber / Speedmaster
Side Mount Lizenz support Bobber / Speedmaster CB12108M / RS2
Three-piece licence plate holder made of 3mm aluminium or stainless steel for Triumph Bobber / Bobber Black & Speedmaster 1200, from our friend KRT Framework.Like all parts made by KRT, the side licence plate holder is of the highest quality and perfectly thought out. The scope of delivery includes all mounting materials as well as a number plate light. The two aluminium support plates make it possible to mount the unit without screws or cables. Long holes paired with three different hole patterns allow mounting in your desired position (side and height are adjustable). The licence plate holder is available with different plates for the countries (Germany, Austria, Switzerland, France, Netherlands, Belgium. Please choose in the selection) Dimensions of the license plates for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €199.00*
Details
Chain guard kit - Short
Chain guard kit - Short CB12459M / RS0
Classicbike-Raisch aluminium chain guard short version - Made in Germany Minimalist & radical The short chain guard kits completely redefine the topic of chain guards. Designed to be as minimalist as possible and positioned extremely close to the chain, they ensure a really clean / radical look. The focus is clearly on design - and yet they reliably fulfil their most important purpose: not getting into the chain. It's not about maximum splash protection, but about looks. True to the motto: if you want to be beautiful, you have to suffer.But to be honest: a cleanly adjusted and well-lubricated chain with modern, high-quality chain grease does not splash around wildly. With a good chain grease, this is absolutely no problem in everyday life, we have installed the short protection ourselves on almost all of our bikes. Scope of delivery & function The kit contains everything you need for installation. No guesswork, no need to buy additional small parts. Depending on the model, a chain guard fin is also included. This is mounted in the centre of the swingarm and ensures that basic protection is also provided there - despite the deliberately short design. Material & production The Raisch short chain guards are made from solid 3 mm aluminium or stainless steel (varies depending on the model).Produced entirely in Germany. The parts are then powder-coated in high-quality black. This ensures an even surface, high resistance and a deep black colour that will look good for years to come.

From €49.95*
Details
Frame Flasher Bobber
Frame Flasher Bobber CB12617 / RS5
Plug & Play turn signal/tail light combination pair, specially designed and manufactured for the Triumph Bobber. Very bright thanks to modern SMD LED technology. Made in Germany.   The set is fully wired and no soldering or crimping is required for installation. We deliver the turn signal/tail light set already wired so that it can be easily plugged into the original connector located behind the Bobber's battery. This kit was developed especially for short fenders, such as the short version from KRT (see accessories in this product description). We have chosen the position of the turn signals to be as inconspicuous as possible, while ensuring that they are clearly visible when in use. Unfortunately, this position does not comply with road traffic regulations (StVO) and may not be used officially in road traffic, as the indicators are too far from the end of the rear wheel (however, the 3-1 indicators are 100% visible and very easy to see, so we do not have any safety concerns with this kit). Even though the turn signals have an E-mark, there is little leeway for positioning the turn signals due to the short fender.

€219.00*
Licensplate Holder site ways CNC
Licensplate Holder site ways CNC CB11182M / RS2
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender. The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900 The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description). Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust. The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.

From €349.00*
Details
Lateral rear wheel bracket
Lateral rear wheel bracket CB12107M / RS2
Side licence plate holder behind the rear wheel "The Claw" Water-cooled Triumph modern Classic models. This side licence plate holder is mounted on the left-hand side of the swingarm of your machine. The licence plate then sits behind the rear wheel (registration with the TÜV is therefore not necessary).A licence plate light (with E-number) and a long cable are included in the scope of delivery. The licence plate holder is welded together from bent tubes / laser-cut parts and a milled part. Also included is a small licence plate that is small enough for any licence plate. Indicator mounting: If you want to mount your indicators or 3-1 indicator / tail light combination directly on the licence plate, you can order an additional set (see accessories in this description). Note for Thruxton & Speed Twin: If you want to install the side licence plate holder and remove the mudguard, you can also order the lower shell from our range. This can be found under the accessories in this description.

€239.90*
Indicator Brackets Bobber Frame
Indicator Brackets Bobber Frame CB12172 / RS3
The turn signal holder Frame for Bobber & Bobber Black allow the mounting of all turn signals with M8 thread on the inside of the frame on your Bobber. Visually, the turn signals are here as good as no longer noticeable, if you use nice small. From behind they are nevertheless very well visible, since they are higher than the rear wheel & the fender. In the pictures 3-1 turn signals are installed which combine tail light, brake light & turn signal in one. We then did not install a central tail light on the Bobber. This makes for an extremely tidy tail. Included with, are 2 black plastic caps that are pushed over the nuts of the turn signals so that they do not stand out. The holders are made of aluminum and then black powder coated.

€19.90*
Race Bobber front mudguard - ALU
Race Bobber front mudguard - ALU CB12864 / RS0
Narrow & flat aluminum front fender for Triumph Bobber models High-quality front fender from Classicbike Raisch – complete with bracket and mounting hardware in race bobber style. Made of aluminum, fits your Triumph Bobber. The extremely short and slim fender gives the front of your Bobber a whole new look. It looks much more delicate than the original and sits closer to the front wheel – creating a sportier, cleaner line. The aluminum brackets supplied have slotted holes that allow you to adjust the height individually. This means that the fender fits both the original 16-inch tires and other common 16- or 17-inch sizes. The narrower design and close fit to the tire make the front wheel look significantly wider and more solid – a real eye-catcher. Notes on coating & painting High-gloss black powder-coatedThanks to the high-quality powder, the powder-coated version comes very close to a glossy paint finish (see photos). Please note, however, that a 100% smooth surface, as achieved by a professional painter who sands and primes the surface beforehand, cannot be expected with powder coating. Want to paint it yourself?No problem – the aluminum fenders are ideal for this. We recommend the black-coated version, as the powder adheres to the aluminum like an ideal primer.

From €229.95*
Details
Sideway licens plate support Swingarm LC
Sideway licens plate support Swingarm LC CB11838 / RS1
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm   Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

€114.95*